Thermal design method of bayonet-tube evaporators and condensers

The paper describes an effectiveness-NTU design method of bayonet-tube evaporators and condensers. Including the effect of the wall superheat on the shell-side film coefficient, and using an energy balance on the tube, differential equations for the steady-state fluid temperatures are formulated. Because of the nonlinear nature of the governing equations, the fourth-order Runge-Kutta method is employed to the solution of the finite difference equations. The results are iterated with the combination of integration techniques. An upper bound to the numerical error being ±5% the fluid temperature distribution as well as the exchanger effectiveness are determined, and presented as a function of the Hurd number, the number of heat transfer units and the flow arrangement. For flow entering through the inner tube, the temperature distribution displays the occurrence of a minimum at a point other than the tube-tip of the exchanger. In an extension of the analysis, an effort is made to illustrate the deviation of the results obtained by uniform film coefficient from the present study, and the differences are outlined.     

Studies on the interactions of metal oxides and Na2 SO4 at 1100 and 1200 K in oxygen

The interaction of different metal oxides such as Co₃O₄, NiO, Al₂O₃, Cr₂O₃, Fe₂O₃ and SiO₂ with Na₂SO₄ at a temperature of 1100 and 1200 K in flowing oxygen has been studied. The thermogravimetric studies for each system were carried out as a function of Na₂SO₄ in the mixture. The presence of different constituents in the reaction products were identified by X-ray diffraction analysis and the morphologies of the reaction products were characterized using metallography and scanning electron microscopy (SEM). The formation of products was also investigated by thermodynamic computation of free energies of the reactions and the study of relevant equilibrium phase diagrams. The soluble species in the aqueous solutions of the reaction products were determined quantitatively using atomic absorption spectrophotometry. The high temperature interaction products usually contain a 3-phase structure namely, Na₂O·M₂O _x , M₂O _x and metal sulphide and/or metal sulphate. The formation of Na₂O·M₂O _x depends upon the solid state solubility of metal oxide in the molten salt at high temperatures. Under limited solubility conditions Na₂O·M₂O _x is invariably formed, but as soon as this condition is relaxed the oxide. M₂O _x , precipitates and forms a separate phase.     

AN EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE STARTING FLOW OF A UNIFORMLY ACCELERATING CIRCULAR CYLIINDER

The starting flow around a uniformly accelerated circular cylinder is investigatedby flow visualization techncque and solving N-S equations numerically in detail.The results ofthe starting flow are similar with those of the impulsively started one.At lower Re_α,numbers the“phenomenon a”is revealed;the“phenomenon β”appears at higher Re_α numbers,but withonly one secondary vortex.At the early stage of the starting vortex formation,the flow islaminar;at the later stage,the flow transforms into turbulent flow.The velocity distribution inthe flow field is measured with the multiwires installment.The calculational results are comparedwith the results of experiment,and both are in agreement with each other.     

自由飞行轨道解析解的中间轨道方法

本文给出了一组不仅能用于卫星轨道计算，同时也能用于导弹自由飞行轨道的中间轨道计算公式。引组公式的解与二体问题解有很好的可比性。由于导弹轨道与卫星轨道有很大不同，故计算中的各使用常数的取值范围也有很大不同。     

高层建筑供水方式及其耗能分析

文章探讨了高层建筑的供水方式及其耗能分析,详述了两种高层建筑的主要供水方式,并比较了它们在耗能方面上的优缺点.     

模拟光耦SLC800在转台系统中的应用

在大功率转台控制系统中．存在着较大的电压干扰和电磁兼容问题。在转台的控制精度和驱动功率不断提高的情况下．本文使用模拟光耦隔离器件SLC800重新设计了转台中的某部分模拟电路．将功率放大电路和控制电路隔开，来增强系统的抗干扰能力和运行的可靠性。实验结果的分析和转台的运行表明：应用模拟光耦进行隔离，有效地消除了转台控制中的干扰和电磁兼容。     

落脚河水电站引水发电系统的调节保证计算分析

水轮发电机组在运行中遇到启动、正常停机、增减负荷、事故甩负荷等工况变化时，经常会引起引水发电系统的水力过渡过程，所以在设计中必须通过调节保证计算以选择合适的导叶调节规律及其调节时间，从而优化压力引水系统的运行工况，使水电站的水工建筑物布置既经济合理又安全可靠。     

三江平原水利综合规划的重新编制问题

三江平原是我国重要的商品粮基地和粮食战略后备基地。原有规划距今已过30年，远不能适应现代发展要求。结合新的形势，提出了重新编制三江平原综合规划的现实意义、目标设想及主要修编内容。     

提高油田集输系统可靠性的研究

应用现代可靠性理论,从设计、工艺、技术等方面对油田集输系统进行了可靠性探讨,提出了增强系统可靠性的措施。