铝箔轧机开卷和卷取电机的谐波分析

本文结合一台2000mm铝箔轧机的电气传动系统，介绍铝箔轧机开卷、卷取电机的谐波计算方法，并分析铝箔轧机开卷、卷取的谐波特点。     

WZ—C系列密封阀结构分析与改进

对W Z-C系列无料钟高炉炉顶布料设备上、下密封阀在涟钢3#高炉的使用情况进行了论述,分析了故障产生的机理,对密封阀的结构进行了改造并取得了相当可观的经济效益。     

3D model retrieval using principal plane analysis and dynamic programming

Three dimensional models play an important role in many applications; the problem is how to select the appropriate models from a 3D database rapidly and accurately. In recent years, a variety of shape representations, statistical methods, and geometric algorithms have been proposed for matching 3D shapes or models. In this paper, we propose a 3D shape representation scheme based on a combination of principal plane analysis and dynamic programming. The proposed 3D shape representation scheme consists of three steps. First, a 3D model is transformed into a 2D image by projecting the vertices of the model onto its principal plane. Second, the convex hall of the 2D shape of the model is further segmented into multiple disjoint triangles using dynamic programming. Finally, for each triangle, a projection score histogram and moments are extracted as the feature vectors for similarity searching. Experimental results showed the robustness of the proposed scheme, which resists translation, rotation, scaling, noise, and destructive attacks. The proposed 3D model retrieval method performs fairly well in retrieving models having similar characteristics from a database of 3D models.     

An efficient method for developing requirement specifications for plant control software using a component-based software prototype

This paper proposes an efficient method to develop requirement specifications for Plant Control Software (PCSW) using software-component-based prototypes. Prior to this proposal, domain analyses were conducted on existing PCSWs, and their functions were classified into “similar functions” and “individual functions”. Then PCSW Software Components (PSC: PCSW Software Component, PSCs: PCSW Software Components) were developed to correspond to these functions. PSCs as parameter-style components were developed in order to satisfy the clients’ (we define clients as owners, managers and operators of plants) requirements. A support environment for developing requirement specifications was developed. The environment consists of the Prototype Development Tool (PDT), the Behavior Check Simulator (BCS) and the Requirement Specification Development Tool (RSDT). The method consists of four steps. In the first step, PDT is used to define the parameters to customize PSCs and to compose a PCSW prototype by setting these parameters to PSCs. In the second step, BCS is used to execute the composed PCSW prototype and check its behavior and relevancy against the clients’ expectations. In the third step, steps 1 and 2 are repeated until the behavior of the PCSW prototype satisfies the clients’ requirements. Finally, a requirement specification is developed from the PCSW prototype which fully reflects the clients’ requirements. In order to evaluate the proposed method, it has been applied in five development cases. A Requirement Coverage of 91%, a Requirement Revision Rate of 6%, a PSC Reuse Rate of 92% and a LOC Reuse Rate of 83% have been achieved. In addition, a reduction of 55% in the amount of time required to develop requirement specifications has been achieved. These results indicate that the proposed method has sufficient capability to develop an exhaustive and an adequate PCSW requirement specification. And the developed PSCs have sufficient functions and capability to compose PCSW prototypes, and the support environment is capable of shortening the time taken to develop requirement specifications.     

灯泡贯流泵装置的基本流态分析

为了回答灯泡贯流泵装置中的灯泡体究竟应该前置还是应该后置的问题,应用水泵装置三维湍流数值模拟的方法分别研究了南水北调东线工程某泵站前置灯泡和后置灯泡贯流泵装置两个不同方案的流态,揭示了前置灯泡和后置灯泡贯流泵装置的基本流动属性;数值模拟的结果得到流道模型试验的验证。研究结果表明:前置灯泡贯流泵装置的进、出水流态均匀平顺,水力损失较小;后置灯泡贯流泵装置的进水流态均匀平顺,但出水流道内存在明显的偏流和旋涡流动,水力损失较大;灯泡体前置符合水力学的基本原理,是获得最佳灯泡贯流泵装置水力性能的必要条件之一。     

分偏移距动校正方法的改进

在地震资料处理中，速度分析和动校正对资料品质的影响很大。由于动校正速度是随偏移距变化而变化的，而常规速度分析并没有考虑这一因素，动校正效果往往不是很理想，从而影响资料的叠加和成像效果。分偏移距动校方法是在不同偏移距上采用不同的速度进行动校正。但由于是在不同偏移距组上分别独立进行速度分析和动校正，因此不能将不同偏移距组的同一反射同相轴校正到同一to层位上。这样就需要进行繁琐的后续处理，而且还会降低同相轴的连续性和平滑性。为此，对该方法进行了一些改进，即固定to在不同的分偏移距段进行速度扫描，段与段之间的衔接问题采用平滑处理解决。理论模型分析表明，采取上述改进措施后，动校正效果得到了一定提高，改善了同相轴的连续性和平滑性。     

温度场下超长楼板中抗裂筋的定量分析

本文对超长结构楼板在温度场下的行为进行理论研究和计算分析，并推导简便可行的计算公式。为超长楼板抗裂筋设计提供定量的方法，可供相关专业技术人员参考。     

Geotechnical study for optimizing the slope design of a deep open-pit mine,India

The study was undertaken to determine the optimal overall slope angle of a lead–zinc mine, which could extend down to a depth of 170 m. Detailed geotechnical investigations were conducted, including geotechnical mapping of existing benches to establish the geometrical and mechanical properties of the discontinuities, the drilling of eight boreholes and the establishment of the physico-mechanical properties of the intact rock. Based on these data, limit equilibrium and numerical simulation techniques were applied to assess the stability of the slopes and determine an optimal slope angle. It was concluded that the overall foot-wall and hanging-wall slopes should be 42 and 48° respectively.      

Red emission from Eu3+: PVA polymer film

Bright red luminescent Eu³⁺ doped polyvinyl alcohol (PVA) films were made by solution casting technique. The emission performance of these films was studied from the measurement of excitation, emission, and lifetimes. On irradiation with an UV source, the doped films emitted bright red light. Such luminescent polymer films are expected to find potential applications as new optical materials. Emission process in the system was explained by an energy level scheme. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3273–3276, 2006     

大型活塞式压缩机弹性隔振基础的设计及安装

大型活塞式压缩机基础转速较低,传统上采用固定大块体结构,不仅基础的体积和重量都很大,而且动力计算模型也比较复杂,设计参数具有不确定性。而弹簧隔振基础结构边界条件简单清晰,解除了设备、基础块与下部结构的刚性动态耦合,受力明确,构造简单,可靠性和准确度高;隔振效率高达80%以上,能大大降低设备本身和对下部结构的动力作用。文章结合胜利油田油气集输总厂一工程实例,从结构型式、隔振原理、物理参数、动力分析几方面介绍了弹性隔振基础的设计,并简要介绍了弹性隔振基础的安装要点。