A general formula for the evaluation of thermodynamic and aerodynamic losses in nucleating steam flow

Near saturation steam undergoing rapid expansion, with homogeneous nucleation of water droplets, is numerically studied in a series of converging/diverging nozzles with and without shocks. To understand loss mechanisms in such flows a numerical model is presented to calculate thermodynamic losses, which is further used to quantify associated total aerodynamic losses. For the converging/diverging nozzle configuration, the model shows that the overall thermodynamic loss is only mildly influenced by increasing shock strength, while the aerodynamic losses follow that of the single phase flow, and are of the same magnitude as the thermodynamic loss only in the case of very weak shocks. The thermodynamic losses can be attributed to two influences, the homogeneous nucleation event, and the post-shock thermal oscillations in the two-phase system. The calculations rely on a new two-phase CFD model, previously reported, for non-equilibrium phase change with droplet nucleation applicable to general 3D flow configurations.     

曙光油田超稠油井套管损坏的机理和防治

超稠油特殊的油藏特点决定了其生产周期短、注汽频繁、出砂、汽窜、超覆现象严重，以及套管质量等因素的影响，套管损坏较为严重。对曙光油田超稠油井套管损坏的规律和机理进行了研究，并从钻井和完井工艺的完善、套管钢级和射孔工艺的选择、采油生产参数的确定、注汽管柱隔热效果的提高、防治砂工艺等方面，对套管损坏提出了预防措施和对策。并对套管损坏井制定了修复再利用方案。     

汽轮机回热系统给水焓升的最优分配

从汽轮机回热系统的实际情况出发，运用非线性规划理论和计算机技术，解决了给水焓升设计中的最优分配问题。结合具体实例，针对国产200MW汽轮机回热系统给水焓升的分配进行了说明。     

轧钢加热炉汽化冷却余热的合理利用技术

针对加热炉汽化冷却系统所产饱和蒸汽在非采暖期大量放散的现状，通过实例提出可用这类蒸汽制冷，作为夏季某些单位空调之用。这样就可以用较少的投资解决非采暖期的汽冷余热浪费问题，合理利用热能，降低轧钢成本。     

西门子V94.3A燃机参数偏离对机组功率和效率的影响

应用小偏差原理，求得燃气轮机机组中10个主要参数(Ck，T1，ηk,ηT,ηc,εk,ξ1,ξ2,ξ3)变化对机组出力和效率的影响系数，并以西门子V94.3A燃机为实例进行讨论。     

未来航空润滑油基础油

介绍了未来航空涡轮发动机对润滑油性能的要求:在260,-54℃时,试样运动黏度分别大于1.0 mm2/s和小于15 000 mm2/s,热氧化安定性温度为260~427℃。该要求已超出了目前使用的酯类润滑油所能承受的最大极限。为了满足要求,需开发全氟聚醚、改性硅油、聚苯醚、C-型醚、氟醚三嗪及环三磷偶氮润滑油基础油,它们的使用温度依次为:-34~316,-60~260,5~288,-29~260,-30~343,-15~343℃。     

汽轮机数字电液控制系统及其应用

介绍了汽轮机数字电液控制系统（DEH）的硬件组成，着重论述了DEH的控制原理和控制过程。结合天津碱厂新建4^#机组,与前3台机组的液压控制调节方式进行比较，突出了DEH控制的优势。对DEH系统的软件作了介绍。同时对DEH的控制系统Foxboro I／A Series的系统软件和系统网络作了较详细的论述。最后，讨论了运行中可能出现的问题和解决方法。     

跳时序列与跳频序列的性能比较

通过对传统通信中跳频序列与超宽带无线电通信中跳时序列的分析比较,得出了两者间相关性能的关系,论述了两者之间的差异,并总结出了将跳频序列转换成为跳时序列的方法,从而为超宽带无线电通信中跳时序列的构造提供了参考。     

恒运电厂5号机抽汽供热改造

介绍半高压单缸凝汽式汽轮机改造为抽汽拱热式组的设计思路及施工改造过程，对改造中出现的新问题进行了分析并提出解决办法，改造后，机组抽气直接供给热网，社会效益和经济效益明显。     

Influence of adsorption on the measurement of diffusion coefficients by Taylor dispersion

The effect of adsorption on the measurement of diffusion coefficients by the Taylor dispersion technique is investigated by modifying the governing equation to account for reversible, nonequilibrium adsorption. The resulting two-dimensional equations are solved by an explicit finite-difference technique. Experimental data for the acridine carbon dioxide system indicated that acridine adsorbs on the walls on the tubing and these data were investigated with this model. The influence of carious parameters including the number of sites and the rates of adsorption desorption was investigated by conducting a parametric sensitivity analysis on the model. It was found that adsorption of the solute on the wall of the tubing could produce an error as high as 35% on the measured diffusion coefficient compared to the actual diffusion coellicient. Examination of the influence of each of the parameters will enable Inure investigators to reduce the effect of adsorption in the measurement of diffusion coefficients by Taylor dispersion.