Characterization of molecular orientation in injection–stretch–blow‐molded poly(ethylene terephthalate) bottles by means of external reflection infrared spectroscopy

The molecular orientation at the outer surface of injection–stretch–blow‐molded bottles made from poly(ethylene terephthalate) was characterized and quantified by means of front‐surface reflection infrared spectroscopy based on a method developed previously. Results were obtained for two different bottle shapes (cylindrical and rectangular) molded at different injection mold temperatures (16, 38, and 60°C). For the cylindrical bottles, the preferred molecular chain orientation was found to be in the axial direction, with the Hermans orientation function near 0.3 for all three mold temperatures. For the less symmetrical rectangular bottles, a significant difference was observed between the large and small faces. For the large face, the orientation was mainly in the hoop direction; the Hermans orientation function was in the range of 0.3–0.5 and was essentially the same at all mold temperatures and positions along the bottle height. For the small face, on the other hand, the preferred orientation changed from the hoop direction near the bottom to the axial direction near the top, and the variation was more pronounced at lower mold temperatures. The utility of the front‐surface reflection technique was clearly demonstrated. It was also applied, with the use of an infrared microscope, to examine the orientation gradient across the wall thickness. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1319–1327, 2007     

注射成型塑化过程的可视化实验研究

利用自行开发的可视化实验装置对注射成型的塑化过程进行了系统的观察,着重讨论了不同的工艺条件对塑化性能的影响,同时借助示踪粒子对塑化过程的重要参数——固相速度进行了测量。实验所取得的数据为注射成型熔融模型的建立和对模型的验证提供了依据,同时也是注射螺杆优化设计的基础数据。     

肥料防结块缓释概况及性能快速表征方法探讨

介绍了颗粒肥料结块的原因机理、影响因素和传统的处理方法。简述了缓释肥料的特点、类型、加工方法以及国内外的研究发展状况。模拟肥料贮存、运输和施用环境以及设计装置，对颗粒肥料防结块、缓释性能快速表征方法进行了有益的探讨。对不同包膜尿素的测试结果表明，所设计的肥料养分释放模拟装置具有较好的应用前景。     

酚醛树脂注塑料的化学流变行为研究

利用Brabender流变仪，考察了酚醛树脂注塑料的化学流变特性，根据双阿累尼乌斯方程建立了酚醛树脂注塑料的化学流变模型。该模型与实验结果具有较好的一致性，利用该模型可以预测酚醛注塑料注塑所需要的工艺窗口，并能动态模拟整个注塑过程中的黏度变化。     

注塑流动与传热分析的自适应隐式控制体积法

在注塑流动与传热分析中采用自适应隐式控制体积法,利用自动控制的参数识别方法来自动调节时间步长,在每个时间步长流动将向前推进大约半个单元大小的距离,厚度方向的温度采用契比雪夫配点法进行计算,压力方程的求解方法是预条件共轭梯度法。计算结果表明,自适应隐式控制体积法的时间复杂度是结点数目的平方,而且1h之内可以求解10000结点规模的问题。     

SERCOS Ⅱ在注塑机全电动设计中的应用

针对传统注塑机在加工精度、加工效率上的不足，提出一种全电子注塑机的控制方案，介绍了基于SERCOSⅡ实时系统的运动控制方法，分析了实现注塑过程的高速高精度的硬件体系。在试验样机3个月的连续工作中，当周期循环时间为4ms，注射量最大达到80cm^3时，产品的成型周期能够控制在15s以内，注出产品的质量、精度均满足要求，表明该设计切实可行。     

熔体温度对气体辅助注射成型PC／PE共混物形态的影响

分别在低温（200℃）和高温（270℃）下制备了聚碳酸酯／聚乙烯（PC／PE）共混物的气体辅助注射成型制品，通过扫描电镜对PC相不同部位的形态观察，发现分散相PC的形变和分布受成型温度的影响比较大。在低温成型时，分散相PC从表层到气道都有变形，而在高温成型时，分散相PC在气道部位几乎没有变形。在形态分析的基础上，探讨了温度对气体辅助注射成型共混物形态的形成和分布的影响机理。     

尿素包合法分离橡胶籽油中的多价不饱和脂肪酸

用尿素包合法从橡胶籽油混合脂肪酸中分离多价不饱和脂肪酸 ,用正交设计实验法对分离工艺进行研究 ,其最佳分离条件是 :原料配比为m(混合脂肪酸 )∶m(尿素 )∶m(乙醇 ) =1 0 0∶1 5∶1 8,回流时间 12 0min。经一次尿素包合法分离即可得到多价不饱和脂肪酸质量分数大于90 %的产品 ,实验收率大于 35 %     

Countercurrent approach to the enrichment of Δ9c,11t-and Δ10t,12c-18:2 isomers by urea complexation

CLA refers to a group of geometrical and positional isomers of linoleic acid. CLA has been shown to have potentially beneficial effects on cancer, atherosclerosis, and body metabolism in animals. Mixtures containing equal amounts of these isomers are commonly used in many research studies because of their greater availability and lower cost relative to pure isomers. This has hindered progress in elucidating the biological properties of specific isomers and their relevance in animal and human biology. A method was developed that offers a compromise between cost and utility to make available enriched mixtures of either the Δ9c,11t- or Δ10t,12c-18:2 isomers for use in a wide range of experimental applications. A countercurrent approach was developed to separate the Δ9c,11t- and Δ10t,12c-18:2 isomers from an equal mixture of these two isomers by urea complexation. After three successive rounds of complexation using an equal amount of CLA and urea, a fraction enriched in Δ9c,11t-18:2 containing 42.5 and 17.4% of Δ9c,11t-and Δ10t,12c-18:2, respectively, was recovered. After a single round of complexation using 2.5 g urea/g CLA, a fraction enriched in Δ10t,12c-18:2 was recovered containing 29.7 and 69.1% of Δ9c,11t- and Δ10t,12c-18:2, respectively.     

注塑模具浇注系统三维参数化设计研究

注塑模的浇注系统包括主流道、分流道和浇口，运用基本特征的方法，把浇注系统作为设计特征，实现了浇注系统与成型零件的同时生成。