温控阀用感温蜡的性能分析

感温包既是温控阀的驱动元件,也是流体的感温元件。感温包内的感温蜡性能的好坏直接影响温控阀的工作状况。作者通过差热分析实验,将温控阀用感温蜡和普通石蜡的相变性能进行分析,说明了感温蜡发生相变时能够吸收更多的热量,比普通石蜡更适合作感温介质。     

计算机控制与检测气动换向阀试验台

介绍一种采用计算机控制与检测气动换向阀试验台的特点和测试系统设计。     

三杆式切断蝶阀的设计与开发

介绍了三杆式切断蝶阀的工作原理,并对世林(漯河)冶金设备有限公司研制开发的三杆式切断蝶阀结构形式、性能与特点做了详细分析。     

分配计量多通阀技术分析

介绍了新型分配计量多通阀的系统原理、结构特点和关键技术.     

Circulating Monocyte Subsets and Transcatheter Aortic Valve Replacement

Transcatheter aortic valve replacement (TAVR), as an alternative to open heart surgery, has revolutionized the treatment of severe aortic valve stenosis (AVS), the most common valvular disorder in the elderly. AVS is now considered a form of atherosclerosis and, like the latter, partly of inflammatory origin. Patients with high-grade AVS have a highly disturbed blood flow associated with high levels of shear stress. The immediate reopening of the valve during TAVR leads to a sudden restoration of a normal blood flow hemodynamic. Despite its good prognosis for patients, TAVR remains associated with bleeding or thrombotic postprocedural complications, involving mechanisms that are still poorly understood. Many studies report the close link between blood coagulation and inflammation, termed thromboinflammation, including monocytes as a major actor. The TAVR procedure represents a unique opportunity to study the influence of shear stress on human monocytes, key mediators of inflammation and hemostasis processes. The purpose of this study was to conduct a review of the literature to provide a comprehensive overview of the impact of TAVR on monocyte phenotype and subset repartition and the association of these parameters with the clinical outcomes of patients with severe AVS who underwent TAVR.     

基于流-热-固单向耦合计算的LNG船用蝶阀流动及结构改进设计

以超低温蝶阀为研究对象、LNG液化天然气（Liquefied Natural Gas,LNG）为流体工质,利用Solidworks软件对蝶板的结构尺寸进行参数化处理。基于计算流体力学数值模拟技术,利用Ansys软件对蝶阀开展流-热-固单向耦合计算分析,计算90°~10°不同蝶阀开度下蝶板的流量系数,及蝶阀开度10°下不同蝶板结构参数对蝶阀流通性能、蝶板位移及应力行为的影响。计算结果表明：减小蝶板厚度可以显著增强蝶阀的流通性能,降低蝶板所受最大应力;降低轴颈厚度对蝶阀流通性能提升效果较弱,但可以有效降低蝶板所受最大应力。     

基础振动下直动式减压阀动态特性分析

针对基础振动对TBM液压元件性能的影响,为TBM液压元件优化设计提供理论依据,选择直动式减压阀为研究对象,分析其工作原理,建立减压阀的动态响应数学模型,仿真研究基础振动幅值和频率对减压阀波动特性的影响规律,分析减压阀不同结构参数对压力波动的影响.结果表明：基础振动会引起减压阀出口压力波动,波动幅值随振动幅值增加而增大;当基础振动频率大于50 Hz时,压力波动幅值随频率的增加明显增大;减小背压腔初始容积和回流通道直径能提高减压阀的动态稳定性.     

矿用本安型电磁卸荷阀的研究

通过对传统泵站卸荷阀工作原理进行分析,采用了本安型电磁卸荷阀,解决了传统泵站系统的压力波动大,压力调节不方便等问题,并且通过压力检测反馈来控制电磁先导阀启闭,以此控制泵的卸荷时机,使泵的压力波动在设定范围内。     

门站调压系统自动识别选路装置的设计

介绍了天然气门站调压系统中自动识别选路装置的设计原则,探讨了自动识别选路装置的结构及控制过程。当运行路超压切断或不能满足下游用气时,备用路能自动启动供气。当运行路超压时,运行路紧急切断阀关闭,而备用路紧急切断阀不动作。     

Early Postoperative Immunothrombosis of Bioprosthetic Mitral Valve and Left Atrium: A Case Report

A 72-year-old female patient with mixed rheumatic mitral valve disease and persistent atrial fibrillation underwent mitral valve replacement and suffered from a combined thrombosis of the bioprosthetic valve and the left atrium as soon as 2 days post operation. The patient immediately underwent repeated valve replacement and left atrial thrombectomy. Yet, four days later the patient died due to the recurrent prosthetic valve and left atrial thrombosis which both resulted in an extremely low cardiac output. In this patient’s case, the thrombosis was notable for the resistance to anticoagulant therapy as well as for aggressive neutrophil infiltration and release of neutrophil extracellular traps (NETs) within the clot, as demonstrated by immunostaining. The reasons behind these phenomena remained unclear, as no signs of sepsis or contamination of the BHV were documented, although the patient was diagnosed with inherited thrombophilia that could impede the fibrinolysis. The described case highlights the hazard of immunothrombosis upon valve replacement and elucidates its mechanisms in this surgical setting.