Hardware and software architecture for power quality analysis

This paper presents a novel concept for power quality hardware and software architecture. Software tools related to detection, classification and characterization of power quality events can be integrated into a Distribution Control Center in which the interconnection between different subsystems is being carried out through the Internet allowing flexibility to the system. This system is implemented using wavelet analysis applied in all proposed algorithms. Different power quality events are taken as examples to illustrate the capabilities of the proposed method. The obtained results reveal that the proposed architecture is feasible to be implemented as an integral part of a control center system.The proposed system has the property of fast and accurate detection and classification of any power quality disturbance event and introduces a new PQ index determination that allows characterizing any type of disturbance including the non-periodic signals.     

A New Matlab De-noising Algorithm for Signal Extraction

The goal of a de-noising algorithm is to reconstruct a signal from its noise-corrupted observations. Perfect reconstruction is seldom possible and performance is measured under a given fidelity criterion. In a recent work, the authors addressed a new Matlab algorithm for de-noising. A key method of the algorithm is selecting an optimal basis from a library of wavelet bases for ideal de-noising. The algorithm with an optimal basis from a library of wavelet bases for de-noising was created through making use of Matlab＇s Wavelet Toolbox. The experimental results show that the new algorithm is efficient in signal de-nosing.     

基于纠错编码和小波变换的数字图像水印算法

文章提出了一种基于小波变换和纠错编码的数字图像水印算法,该算法不需要利用原始图像。实验结果表明,该算法较好地保持了图像的质量,并大大提高了检测的可靠性,对常见的图像处理方法显示了较强的鲁棒性。     

Use of a neural network to link AFM etch patterns to plasma parameters

Plasmas play a critical role in depositing thin films or etching fine patterns while manufacturing integrated circuits. A new model for plasma diagnosis is presented. This was accomplished by linking atomic force microscopy (AFM) to plasma parameters using a neural network. Experimental AFM data were collected during the etching of silicon oxynitride films in C₂F₆ inductively coupled plasma. Surface roughness of etched patterns was characterized by means of discrete wavelet transformation. This led to the construction of three vertical (type I), diagonal (type II), and horizontal (type III) wavelet coefficient-based models. The performance of diagnosis models was evaluated in terms of the prediction and recognition accuracies. Both accuracies were optimized as a function of the number of hidden neurons. Comparisons revealed that the type I model yielded the largest recognition and the smallest prediction error. This was demonstrated even under stricter monitoring conditions. More improved diagnosis is expected by enhancing AFM resolution.     

炼油化工装置技术改造的决策与实施

针对炼油和石化工业装置技术改造的特点，系统地总结了技术改造的类型和改造方案的制定、决策及实施的原则、程序和方法，指出对炼化装置实施技术改造是一项极其复杂、极具难度的系统工程，必须结合实际情况，以投资回报最大化为原则，通过深入细致地研究和反复比选优化改造方案，并结合现场情况制定切实、可靠、安全的实施方案。     

位置控制器与通用变频器APC系统

在每一周期的开始时的速度值V1预设定到传动装置上进行速度预控制，同时，反馈回来的实际值Sj与S1进行比较计算，得出当时偏差值△S，此偏差值△S乘以比例系数Ksp，得到Vk叠加在Vt上，得出传动装置应具有的速度控制信号V，然后V经速度／电压变换和D／A转换向传动系统的速度控制发出控制信号Uα控制执行机构的定位。调节Ksp的值使系统无超调无振荡。     

PHS数据通信技术的发展及业务运营探讨

文章概述了个人手持电话系统(PHS)的发展过程,对其最新技术进行了介绍,并在对PHS数据通信业务的发展及运营策略进行深入分析和探讨的基础上,展望了该业务的应用前景.     

具有迭代结构的时频分布计算方法

本文讨论了时频分布中的迭代算法的问题.通过选择特殊的计算窗口,时频分布的迭代运算形式能够有效地利用前面数据段的分析结果,从而避免了重复性的运算,使得计算效率得到提高.本文对原有的利用单边窗口的时频分布迭代算法的性能进行了分析,提出了采用对称型窗口的迭代计算形式.与单边窗口相比,双边形式的计算窗口不但可以有效地提高时频表示精度,同时还能够更为准确的表示信号的瞬时频率.文章对各项理论分析结果提供了相应的仿真实验结果.     

分数阶傅立叶变换的多种定义形式及其光学实现系统分析

分数阶傅立叶变换是经典傅立叶变换的广义形式,它同时从时间域和频率域(或空间域)揭示信号特征。本文系统地分析了分数阶傅立叶变换三种定义形式及其所对应的光学实现系统的组成和原理,说明了光学信息处理系统实现分数阶傅立叶变换的有效性.     

一种空间自适应小波门限去噪算法

提出了一种空间自适应小波门限去噪算法,该算法在小波域对含噪小波系数做两次自适应去噪,两次自适应门限分别基于最大似然(ML)方差估计和最大后验概率(MAP)方差估计.仿真结果表明,该算法与其它自适应门限去噪算法相比,去噪后的图象具有更高的峰值信噪比(PSNR).