强捻棉纱针织产品的性能研究

通过对强捻棉纱针织产品进行服用性能测试，得出强捻纱织物具有良好的服用性能。     

一种新型注入剖面组合测井仪及其应用

为了提高注入剖面测井的准确性，研制了一种新型注入剖面组合测井仪。该仪器由流量处理单元、伽马处理单元、井温处理单元、磁性定位处理单元、调制式传输、电源电路六部分组成。一次下井可同时测取流量、伽马、井温、磁性定位四组参数。具有测取资料精度高、单芯电缆传输、流量可单点测量也可连续测量以厦现场监测和维修方便等特点。     

Centrifugal Casting of High Speed Steel/Nodular Cast Iron Compound Roll Collar

Ｈｉｇｈ ｓｐｅｅｄｓｔｅｅｌ (ＨＳＳ) ,ｉｓｃｈａｒａｃｔｅｒｉｚｅｄｂｙｅｘ ｃｅｌｌｅｎｔｈａｒｄｎｅｓｓ ,ｗｅａｒｒｅｓｉｓｔａｎｃｅ ,ａｎｄ ｇｏｏｄｒｅｄｈａｒｄｎｅｓｓ .Ｒｅｃｅｎｔｌｙ ,ＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｈｏｔｒｏｌｌｉｎｇｒｏｌｌｓｔｏｐｒｏｄｕｃｅｓｔｒｉｐｓｏｆｇｏｏｄｓｈａｐｅａｎｄｓｍａｌｌｃｒｏｗｎｗｉｔｈｅｘｔｅｎｄｅｄｒｏｌｌｓｅｒｖｉｃｅｌｉｆｅ[1,2 ] .ＴｈｅＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｒｏｌｌｃｏｌｌａｒｆｏｒ…     

双层堤基的井涌破坏与无害管涌

双层堤基水文地质结构特殊，堤基承压水常具独特的“渗而不流”特征。在“不流”条件下，堤后盖层薄弱处受超高承压水头顶裂破坏，产生的局部冒水孔实属承压自流井，由此形成的管涌实质为井涌。底部进水的承压井流影响范围不大，井涌的破坏范围更小，据此可区分出有害管涌与无害管涌。前者局限于堤脚附近，小范围压渗为首选方案；对后者，既无需专门防治，更不必追求根治。     

以技术进步促进蒸汽能源的节约

本文运用“软科学”一即通过建立数学模型，进行系统分析和系统优化，阐述对蒸汽管网优化运行的方法及原理，达到提高供热效率及节能降耗的目的．     

流场拟合法在缩微环境中的研究

流场拟合法是由何继善院士提出的物理探测技术。以流场拟合法为理论基础研制的管涌渗漏检测仪在堤坝检测及抗洪抢险中发挥了重要作用，本文提出了一种在缩微环境中模拟管涌渗漏，对流场拟合法进行模拟测试并获得了明显的结果。为管涌仪器的性能检测、校验、标定提供了便捷的测试方法，并为该仪器在生产过程中统一性能和企业标准的制订提供了理论依据。     

煤制合成气低温甲醇洗配管总结

本文根据以煤为原料的合成氨工艺装置中低温甲醇洗涤净化系统的特点，对其配管在工程设计时的一些特殊要求进行总结，供工程设计人员参考。     

凝结水再循环管道振动原因及减振措施

对比了福建省内某电厂一期、二期工程600 MW发电机组凝结水再循环管道的设计和布置,经过分析,得出了一期管道振动的原因。在二期设计中做出了一些改进,基本解决了凝结水再循环管道的振动问题。     

Zonal disintegration phenomenon in enclosing rock mass surrounding deep tunnels -- Elasto-plastic analysis of stress field of enclosing rock mass

The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constitutive model of rock mass were used to analyze the elasto-plastic stress field of the enclosing rock mass around a deep round tunnel. The radius of the plastic region and stress of the enclosing rock mass were obtained by introducing dimensionless parameters of radial distance. The results show that tunneling in deep rock mass causes a maximum stress zone to appear in the vicinity of the boundary of the elastic and the plas-tic zone in the surrounding rock mass. Under the compression of a large tangential force and a small radial force, the rock mass in the maximum stress zone was in an approximate uniaxial loading state, which could lead to a split failure in the rock mass.     

Analytical solution of electromagnetic field generated by induction logging tool in a fan-ring slot of drill collar while drilling

Based on the structural characteristic of metal drill collar for induction logging while drilling, we have given the analytical formulae of lengthways fields E _z and H _z when the tool is located in a fan-ring shaped slot of drill collar by the boundary conditions of electromagnetic field, and derived the other components of electromagnetic field in and out the fan-ring slot from E _z and H _z . In the other intervals of formation, where the drill collar is a solid cylinder, the analytical formulae of field are educed through the method of variable coefficient. The total analytical solutions of field in whole space have been obtained. With the help of the analytical formulae, we have also given numerical examples and analyzed the distributive characteristic of electromagnetic field. From the computational results we find that the secondary scattering field H _z is in a linear relation with the conductivity of stratum. The characteristic of field is very useful for induction logging while drilling, which can be used to measure and analyze the logging responses of the stratum conductivity. This paper sets up a theoretical foundation for us to study the distrbutions of field and to direct the design of logging instruments. Supported by the National Natural Science Foundation of China (Grant No. 10705049), the Beijing Natural Science Foundation (Grant No.1083011) and Funding Project for Academic Human Resources Development in Institutions of Higher Learning [PHR(IHLB)]