The effects of oxygenation aeration treatment on dissipation behaviors of tricaine mesylate in carp (Cyprinus carpio) muscle and water

Tricaine mesylate (MS-222) is one of the most used anesthetics in fish. It can be absorbed by the human body via food consumption, with related detriments to human health. In this study, a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) method was developed for the determination of MS-222 in carp muscle and water samples using liquid chromatography-tandem mass spectrometry (LC-MS/MS). For cleanup procedure, multiplug filtration cleanup (m-PFC) method with n-Hexane delipidation was adopted. The extraction solvent, cleanup methods and sorbents were optimized. All method validation parameters were in the acceptable range. The dissipation behavior study was followed by the method development. Firstly, the anesthesia dose and time were optimized in application study. Secondly, carps were revived for different period of time with (experimental group) and without (control group) the oxygenation aeration treatment to compare the dissipation rate of MS-222. After being anesthetized for 6 h at 50 mg/L and 12 h of elimination, the concentrations of MS-222 in crap muscle and water of experimental group was lower than those of control group. After 36 h of elimination under oxygenation aeration, over 90% of MS-222 was dissipated in carp muscle. The results showed that the half-life of MS-222 in carp muscle was 6.2 h. The findings suggested that the commonly-used oxygenation aeration treatment in aquaculture production had potential effects in accelerating the dissipation of MS-222 in carp and water. In this study, three days of withdrawal period was recommended in carps after MS-222 administration under oxygenation aeration.     

Multi-walled carbon nanotubes-based magnetic solid-phase extraction for the determination of zearalenone and its derivatives in maize by ultra-high performance liquid chromatography-tandem mass spectrometry

A simple and rapid magnetic solid-phase extraction (M-SPE) procedure using multi-walled carbon nanotube-magnetic nanoparticles (MWCNT-MNPs) as sorbents was established for purification of zearalenone (ZEA), α-zearalenol (α-ZOL), β-zearalenol (β-ZOL), zearalanone (ZAN), α-zearalanol (α-ZAL) and β-zearalanol (β-ZAL) in maize. The main parameters affecting the clean-up efficiency were thoroughly investigated, and high purification efficiencies for all analytes were obtained. The resulting MWCNT-MNP-ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was validated for maize samples. The matrix effects were greatly minimized using the M-SPE approach, with signal suppression/enhancement values decreased from 69.9–127.6% to 92.1–103.8%. Consequently, complex matrix-matched calibration curves were not necessary and the calibrations constructed in acetonitrile could be applied for accurate quantification of the targeted mycotoxins in real samples. The average recoveries ranged from 75.8 to 104.1% and the inter- and intra-day precision values expressed as RSDs, were all lower than 14%. Limits of detection and quantification were in the range of 0.03–0.04 and 0.07–0.10 μg/kg, respectively. The analytical performance of the developed method was also successfully evaluated with maize samples, and this method was proved to be a powerful tool for monitoring ZEA and its derivatives in maize.     

δ掺杂样品中空穴态的新行为

用有效质量理论研究了δ掺杂势中电子和空穴的行为。发现能量接近于δ势垒峰的空穴穿越势垒时能产生一系列谐振态。这些状态中的空穴波函数汇聚在势垒峰周围而同量子限制在势阱中的电子波函数交叠,产生光跃迁。用MBE生长的δ掺杂样品进行光调制光谱测量,发现明显的带间跃迁峰。测得的光谱峰同理论计算的能级相吻合,证实了δ势垒中空穴的新行为。     

Implementation of CPA EoS for simultaneous solubility modeling of CO2 and H2S in ionic liquid [OMIM][Tf2N]

In this study, solubility of pure CO₂ and H₂S and their mixture in [OMIM][Tf₂N] modeled applying CPA EoS. CPA combines the SRK equation with an advanced association term, which is similar to that of SAFT. From a practical point of view, the target in the CPA project was to develop a thermodynamic model capable of describing complex equilibria of mixtures containing polar/associating chemicals through a simple procedure with respect to the SAFT.

The AAD% for binary systems, including H₂S+ IL and CO₂+ IL are 6.81, 5.21 respectively. Moreover, AAD% equal to 13.89 was achieved for the ternary system.     

Study of indium droplets formation on the InxGa1−xN films by single crystal x-ray diffraction

Indium droplet formation during the epitaxial growth of In_xGa_1−xN films is a serious problem for achieving high quality films with high indium mole fraction. In this paper, we studied the formation of indium droplets on the In_xGa_1−xN films grown by metalorganic chemical vapor deposition (MOCVD) using single crystal x-ray diffraction. It is found that the indium (101) peak in the x-ray diffraction spectra can be utilized as a quantitative measure to determine the amounts of indium droplets on the film. It is shown by monitoring the indium diffraction peak that the density of indium droplets increases at lower growth temperature. To suppress these indium droplets, a modulation growth technique is used. Indium droplet formation in the modulation growth is investigated and it is revealed in our study that the indium droplets problem has been partially relieved by the modulation growth technique.     

固载于SBA-15分子筛中的同双核金属配合物催化剂

合成了3种同双核金属配合物[M2LCl3]Cl(L代表配体三亚乙基四胺,M代表Co,Cu,Cr),采用微波加热法合成了SBA-15分子筛,采用浸渍法将3种同双核金属配合物分别固载在表面官能化的SBA-15分子筛(SBA-15-NH2分子筛)中制得负载型催化剂。傅里叶变换红外光谱、X射线衍射、紫外可见光谱和热分析表征结果表明,同双核金属配合物被固载后,其结构仍保持完整。以环己烷氧化反应为探针反应,考察了[Co2LCl3]Cl/SBA-15-NH2,[Cu2LCl3]Cl/SBA-15-NH2,[Cr2LCl3]Cl/SBA-15-NH2催化剂的活性,环己烷转化率分别为11.0%,49.5%,57.9%;对于[Cr2LCl3]Cl/SBA-15-NH2催化剂,当分别以乙睛、丙酮和冰醋酸为溶剂时,环己烷转化率分别为57.9%,52.1%,34.2%,3次重复实验的环己烷转化率分别为57.9%,47.8%,46.5%,表明该催化剂具有较好的活性和重复使用性。     

单微乳液中制备Ag/TS-1及丙烯气相环氧化

采用N2H4还原含AgNO3的单微乳液制备了Ag／TS-1催化剂。TEM表征结果表明，Ag高度分散于TS-1之上。以H2、O2存在下的丙烯气相环氧化为探针反应，考察了Ag／TS-1的催化性能。结果表明，采用Ag／TS-1为催化剂，Ag的负载量为1％（质量分数，下同），823 K焙烧后，373 K下反应30 min时，丙烯转化率为1．69％，环氧丙烷（Propylene oxide，PO）选择性为93．2％。当Ag的负载量超过2％时，反应过程中生成大量的热，造成PO的选择性下降。采用Ag的负载量为8％的Ag／TS-1催化剂，消除热效应后，丙烯的转化率为2．46％．PO的选择性为79．2％。     

疏水缔合水溶性聚(丙烯酰胺/丙烯酸钠/N,N-双烯丙基十二胺)水溶液的粘度行为

采用前加碱二元胶束共聚-共水解法合成了三元疏水缔合水溶性聚合物聚(丙烯酰胺/丙烯酸钠/N,N-双烯丙基十二胺)[P(AM/NaAA/DiAC_(12))],研究了其水溶液的粘度行为。当x(DiAC_(12))=0．10%～0．40%时,在30℃、1 mol/L NaCl溶液中,其特性粘数[η]、Huggins常数K_H、粘均相对分子质量(?)分别为16．38～19．45 dL/g,0．214～0．394和8．36×10~6～10．36×10~6g/mol;K_H小于0．8,表明其分子内缔合作用较弱。P (AM/NaAA/DiAC_(12))在矿化度为19 334μg/g,盐水溶液中的表观粘度随疏水单体用量的增加而增加,随温度、剪切速率的增加而降低。在NaCl、CaCl_2的离子强度分别为1．26×10~(-3)～4．88×10~(-3)和1．07×10~(-4)～5．28×10~(-4)mol/kg的水溶液中,P(AM/NaAA/DiAC_(12))水溶液出现盐增粘现象,疏水单体用量越高,盐增粘效应越显著。     

N-苄基丙烯酰胺的合成

以丙烯腈和苯甲醇为原料，浓硫酸作催化剂，合成了N-苄基丙烯酰胺（N-BAA）。考察了反应温度、反应时间和催化剂用量等因素对产物收率的影响，得出了最佳反应条件：n（丙烯腈）：n（苯甲醇）：n（浓硫酸）=3：1：1．2，反应时间3h，反应温度60℃。在最佳条件下，N-BAA的收率可达92％。每100g粗产物用10％氢氧化钠溶液提纯，精制产物纯度可达99．80％，熔点为64～65℃。通过红外光谱对产物结构进行了表征。