模糊聚类在三维地震参数处理中的应用

三维地震参数是一个庞大的三维数据体，能从不同侧面反映储集层的特征。通过对三维地震参数的分析，可以评估油藏表征的参数（沉积相、构造、生长历史、流体饱和度等）。针对传统的聚类方法不能很好地综合考虑各个参数之间的相似程度，提出了用模糊C-均值聚类（fuzzy c-means clustering，简称FCM）对三维地震参数进行处理。从三维地震参数和油藏表征参数之间的关系出发，采用模糊C-均值聚类方法对三维地震参数进行处理，依此评估油藏表征的参数。测试结果表明，模糊C-均值聚类方法能够对三维地震参数进行较为准确的分类，并为储集层的研究提供了很好的依据。     

溶聚丁苯橡胶聚合溶液粘度的研究

研究了（乙二醇二甲醚、二乙二醇二甲醚）－正丁基锂－抽余油体系地溶聚乙苯橡胶不同聚合时间聚合溶液粘度的变化，发现聚合溶粘度与活性种的活性有关，高温严重破坏活性种的活性，计节剂量是杀死活性种活性的另一因素。同时考察了不同苯乙烯／丁二烯（S／B）体系，正丁基锂引发剂用量对聚合粘影响规律，发现S／B越大，聚合粘度越小，S／B越小，聚合粘度越大，引发剂用量减少，聚合液粘度增大。     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

聚氧化乙烯—聚磷酸钠共混物的钠离子导电性

研究了聚氧化乙烯-聚磷酸钠共混物的钠离子导电性和低分子量多缩乙二醇对共混物导电性的改进作用。结果表明,降低多缩乙二醇的分子量以及增加其含量都有利于提高共混物的离子导电率。增塑剂改进共混物导电性的实质是提高共混物的非晶相含量,共混物内钠离子传导发生在非晶区,聚合物链段运动是离子传导的主要推动力。     

废弃聚合物溶液资源化利用的可行性

聚丙烯酰胺是丙烯酰胺均聚物或与其他单体共聚而得聚合物的统称,是水溶性高分子中应用最广泛的品种之一。由于聚丙烯酰胺结构单元中含有酰胺基,易形成氢键,使其具有良好的水溶性和很高的化学活性,已通过接枝或交联得到支链或网状结构的多种改性物,在石油开采、水处理、农业等行业中具有广泛的应用,可用作净水剂、保水剂、肥料和增稠剂等。     

微波辐射环氧树脂618包埋剂的快速聚合法

微波辐射环氧树脂６１８包埋剂的快速聚合法陈文列，钟秀容，陈莲云（福建医学院电子显微镜室，福州３５０００４）环氧树脂包埋的样品固化是电镜制样中时间最长的步骤，故此应用微波技术促进包埋剂聚合反应，以缩短制样时间有实用意义。国外报道微波辅助环氧树脂８１２包...