基于MATLAB仿真的无功补偿电容器投切控制研究

对目前常用的无功补偿电容器投切控制方案所存在的不足进行了详细的分析,给出了补偿电容器投切的优化控制方案,并在MATLAB电力仿真环境下进行了仿真试验。结果表明,所提出的优化方案达到较理想的效果。     

A Cold Model Aerodynamical Test of Air-Staged Combustion in a Tangential Firing Utility Boiler

The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the geometric and boundary condition similarity. At the same time the condition of self-modeling is met. The experimental results show that the mixture of primary air and secondary air becomes slower, the average turbulence magnitude the relative diameter of the tangential firing enlarges of the main combustion zone becomes less and when the secondary air deflection angle increases When the velocity pressure ratio of the secondary air to the primary air （p2/p1） enlarges, the mixture of the secondary air and the primary air becomes stronger, the average turbulence magnitude of the main combustion zone increases, and the relative diameter of the tangential firing becomes larger. Because the over fire air （OFA） laid out near the wall has a powerful penetration, the relative diameter of the tangential firing on the section of the OFA is very little, but the average turbulence magnitude is great. When the velocity pressure ratio of the OFA to the primary air POFA/p1 increases, the relative diameter of the tangential firing on the section of the OFA grows little, the average turbulence magnitude becomes larger and the penetration of the OFA becomes more powerful.     

羚锐制药率先采用CO2激光超微切孔设备

一套具有国际先进水平、获得两项国家专利的膏药全自动生产设备——CO2激光超微切孔膏剂生产设备不久前在河南羚锐制药股份有限公司率先投入使用。该设备是由羚锐制药与华中科技大学及武汉华工激光工程公司等经过近4年的刻苦攻关合作完成，该设备可在每个膏药片上切出直径小于0.3mm、行列间距为5mm的密集小孔阵列，     

JG—16型冲切掘槽连续垂铺塑膜机制的研制与应用

江苏省高邮市水利局研制的ＪＣ－１６型冲切掘槽连续垂铺塑膜机，利用高压水流冲割与特型钢刀切削相结合的冲切原理，实现掘槽工艺，本文以新沂河大小陆湖插膜防渗防洪防险 应用为例，介绍了该机技术特点和施工工艺。     

混凝土基础冲切破坏的统一计算法

本文用量纲分析法得出柱下基础冲切破坏时的简易计算公式，这一公式不仅简单明了，而且精度较高，能把许多前人试验的结果统一于一个公式之中避免了繁复的推导和分析。     

深井重泥浆弱凝胶工艺技术初探

重泥浆强凝胶体系对钴井会产生不利影响。笔者结合川东地区的实际情况,分析了重泥浆强凝胶形成的原因和重泥浆弱凝胶的形成机制,提出了形成重泥浆弱凝胶体系的核心和设计原则,总结出了一套以正确使用泥浆添加剂并配合强有力的固控措施为主的成套深井重泥浆弱凝胶工艺技术,介绍了这套技术在川东地区的应用情况。实践证明,少用甚至不用泥浆降粘剂就可获得并维持尽可能低的静切力,使τ_s,10s为0.5—6Pα、τ_s,10min为2—12.5Pα。     

智能式电容器无触点自动投切装置的研究

针对当前配电网无功补偿自动投切装置存在的问题，提出了一种利用计算机技术和大功率晶闸管实现的智能式无触点电容自动投切装置的方案。该方案的实现，可以达到人们所期望的优化控制和提高可靠性之目的。