超低膨胀陶瓷K_（2x）Ba_（1－x）Zr_4（PO_4）_6系统的X射线衍射

用高温Ｘ射线衍射方法对磷酸锆钡钾系统陶瓷材料的各向异性热膨胀作了研究．对七个组份试样的７７套高温Ｘ射线衍射图作了仔细的指标化和精密点阵常数测定．点阵常数随温度作非线性变化·对Ｋ_２ｘＢａ_１－ｘＺｒ_４（ＰＯ_４）_６的不同组份不同温度（３００～１３００Ｋ）的热膨胀系数。α_ａ、α_ｃ、　作了测定·该系统零膨胀陶瓷的组份为Ｋ_１．１６Ｂａ_０．４２Ｚｒ_４（ＰＯ_４）_６（ｘ＝０．５８）     

COIL中BHP浓度对发生O_2(~1△)的影响

本文实验研究了BHP的浓度对产生O2（1△）的影响。实验结果表明：当BHP浓度大于3.5M时，Cl2利用率以及O2（1△）的产率将不依赖于BHP浓度的变化而变化，同时，实验结果表明，使用低浓度的BHP对COIL的操作是可行的。     

Chemical States of Lanthanum in Carbonized La2O3-Mo Thermionic Cathode Materials

The chemical reaction between lanthanum oxide and molybdenum carbide was studied by thermodynamic calcu-lation, thermal analysis and in-situ X-ray Photoelectron Spectroscopy. The theoretical results show that at the environment allowing for the evaporation of lanthanum, such as in high vacuum, La2O3 in the La2O3-Mo materials can be reduced to metallic lanthanum by molybdenum carbide (Mo2C). To confirm the conclusion, many analysis methods such as XRD, SPS, and TG-DTA were taken. The experimental results show that the chemical state of lanthanum changes during heat-ing. It was proved, for the first time, that reacted metallic lanthanum appears at the surface of this kind of material at high temperature.     

锗酸铋（Bi4Ge3O12）单晶热物理性质的研究

本文用不同的测试技术和方法测定了锗酸铋(BGO)单晶的比热(300～800K)热膨胀系数(100～1100K)和导温系数(140～700K),进而导出了 BGO 单晶不同温度下的导热系数、定容比热、德拜温度和格虑内森数。本文还对 BGO 单晶热物理性质的变化规律作了理论解释。     

任意型一维FIR数字滤波器设计新方法

本文介绍了一种设计任意型（宽带、窄带、低阶、高阶、低通、高通、带通、带阻）一维FIR数字滤波器新方法．给出设计不同类型滤波器的统一方法。各种类型滤波器脉冲响应的设计公式简单、计算方便。该方法消除了Gibbs现象．不仅克服了优化设计中收敛速度、设计精度及初值选取等问题，而且减少设计高阶滤波器的时间。最后，本文给出了各种类型滤波器设计的仿真结果。     

K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

XIV. Yeast sequencing reports. Sequence of MKT1, needed for propagation of M2 satellite dsRNA of the L-A virus of Saccharomyces cerevisiae

MKT1 is required for m aintenance of K₂ above 30°C in strains with the L-A-HN variant of the L-A double-stranded RNA virus of Saccharomyces cerevisiae. We report that MKT1 encodes a 92 979 Da protein with serine-rich regions and the retroviral protease signature, DTG, but with no substantial homology to proteins presently in the databases. This sequence is available from GenBank under Accession Number U09129.     

Yeast sequencing reports. Isolation and sequence analysis of a gene from the linear DNA plasmid pPAC1–2 of Pichia acaciae that shows similarity to a killer toxin gene of Kluyveromyces lactis

The toxin-encoding linear plasmid systems found in Pichia acaciae and Kluyveromyces lactis yeasts appear to be quite similar, both in function and structural organization. By Southern hybridization, a linear plasmid of P. acaciae, pPac1–2, was found to hybridize to the second open reading frame (ORF2) of K. lactis plasmid pGKL1, known to encode the α and β subunits of the K. lactis toxin. A 1·7 kbp segment of pPac1–2 DNA was cloned, sequenced and shown to contain four regions of strong homology to four similarly oriented regions of K. lactis ORF2. This 1·7 kbp fragment also contained an ORF of 1473 bp that could encode a protein of ～ 55·8 kDa. Like the α subunit gene of K. lactis ORF2, a very hydrophobic region occurs at the N-terminus, perhaps representing a signal sequence for transport out of the cell. Unlike K. lactis ORF2, however, the encoded polypeptide is much smaller and lacks a recognizable domain common to chitinases. The structure of a toxin that includes the translation product of this P. acaciae ORF would likely be quite different from that of the K. lactis toxin. Analysis of the upstream region of the P. acaciae ORF revealed an upstream conserved sequence identical to that found before ORFs 8 and 9 of pGKL2. A possible hairpin loop structure, as has been described for each of the four K. lactis pGKL1 ORFs, was found just upstream of the presumed start codon. The similarity of the promoter-like elements found in the linear plasmid genes of these diverse yeasts reinforces the idea of the existence of a unique, but highly conserved, expression system for these novel plasmids. The sequence has been deposited in the GenBank data library under Accession Number U02596.     

Ti-23Al-14Nb-3V合金氩弧焊接头的显微组织及其力学性能

研究了预热对Ｔｉ－２３Ａｌ－１４Ｎｂ－３Ｖ合金焊接性，特别是对消除氩弧焊冷裂纹的作用以及对接头显微组织和力学性能的影响。结果表明，焊前预热可有效降低该合金的冷裂倾向。经预热处理后，焊缝区的结晶层状线消失，热影响区的硬度峰得到缓和，整个焊缝的显微硬度分布趋于均匀，但焊缝区的枝晶发生粗化，热影响区有所扩大。焊件接头的拉伸试验表明，预热可使焊缝区的接头强度系数增加，但无论预热与否，接头强度均低于母材强度，且不显示宏观塑性。