A rugged display: Recent results of flexible cholesteric liquid‐crystal displays

Abstract— A 3‐m‐long rugged flexible display having a novel single‐plastic‐substrate structure has been demonstrated with a coated cholesteric liquid‐crystal mixture. The display is designed to be fabricated by a roll‐to‐roll process to increase productivity at a competitive cost. It has the advantage of having almost no limitation in display length. The high‐resolution (300‐dpi) monochrome cholesteric liquid‐crystal display (ChLCD) can be achieved by using a photo‐addressing method. A single‐layered 10.4‐in. color ChLCD also has been developed with good color and contrast.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Scintillator‐based flat‐panel x‐ray imaging detectors

Abstract— Large‐area amorphous‐silicon flat‐panel x‐ray imaging detectors were introduced commercially about 10 years ago and have seen a steady increase in both volume and number of applications since. The flat‐panel‐detector industry was made possible by manufacturing methods and equipment first developed for the display industry. Here, the different types of flat‐panel detectors are described, with focus on the scintillator‐based TFT/photodiode detector. The manufacturing process used for these detectors is explained and compared to that for displays. Detector operation is detailed, and the various medical and industrial applications are described. Finally, the performance metrics for these detectors and the impact of the performance requirements on detector design are discussed.     

Ambient‐light sensor system with wide dynamic range enhanced by adaptive sensitivity control

Abstract— A new digital ambient‐light sensor system is presented which employs two linear light sensors with different sensitivities and automatically adjusts the sensitivity based on the illumination condition. The adaptation mechanism allows a very wide range of light intensity to be detected, and the input dynamic range of the system is substantially improved from 22.5 to 45.1 dB. The proposed method does not require any additional precision bits for output data. Due to the small number of the output bits and the simple conversion process, the system can be easily integrated on the display panel.     

Touch‐screen panel integrated into 12.1‐in. a‐Si:H TFT‐LCD

Abstract— A touch‐screen‐panel (TSP) embedded 12.1‐in. LCD employing a standard existing a‐Si:H TFT‐LCD process has been successfully developed. Compared with conventional external touch‐screen panels, which use additional components to detect touch events, the new internal TSP exhibits a clearer image and improved touch feeling, as well as increased sensing speed using discrete sensing lines to enable higher‐speed sensing functions including handwriting. The new internal digital switching TSP can be fabricated with low cost because it does not require any additional process steps compared to a standard a‐Si:H TFT‐LCD.     

LCD motion‐blur estimation using different measurement methods

Abstract— The primary goal of this study was to find a measurement method for motion blur which is easy to carry out and gives results that can be reproduced from one lab to another. This method should be able to also take into account methods for reduction of motion blur such as backlight flashing. Two methods have been compared. The first method uses a high‐speed camera that permits us to directly picture the blurred‐edge profile. The second one exploits the mathematical analysis of the motion‐blur formation to construct the blurred‐edge profile from the temporal step response. Measurement results and method proposals are given and discussed.     

Multistable electro‐optical modes in ferroelectric liquid crystals

Abstract— Multistable electro‐optical modes exist under certain conditions in ferroelectric liquid‐crystal (FLC) cells, which means that any light‐transmission level can be memorized after the driving voltage is switched off. The multistability is responsible for three new electro‐optical modes with different shapes of the gray‐scale curve that can be either S‐shaped (double or single dependent upon the applied‐voltage pulse sequence and boundary conditions) or V‐shaped dependent upon boundary conditions and FLC cell parameters. The origin of these modes will be described.     

Digital‐to‐analog converter with gamma correction on glass substrate for TFT‐panel applications

Abstract— Low‐temperature polysilicon (LTPS) technology has a tendency towards integrating all circuits on glass substrate. However, the poly‐Si TFTs suffered poor uniformity with large variations in the device characteristics due to a narrow laser process window for producing large‐grained poly‐Si TFTs. The device variation is a serious problem for circuit realization on the LCD panel, so how to design reliable on‐panel circuits is a challenge for system‐on‐panel (SOP) applications. In this work, a 6‐bit R‐string digital‐to‐analog converter (DAC) with gamma correction on glass substrate for TFT‐panel applications is proposed. The proposed circuit, which is composed of a folded R‐string circuit, a segmented digital decoder, and reordering of the decoding circuit, has been designed and fabricated in a 3‐μm LTPS technology. The area of the new proposed DAC circuit is effectively reduced to about one‐sixth compared to that of the conventional circuit for the same LTPS process.     

Moving‐picture response time (MPRT) of LCDs for the oblique viewing direction

Abstract— The dynamic performance of displays is an important characteristic for multimedia applications. Motion‐picture response time (MPRT) has been used as an indicator of the dynamic performance of LCDs. This paper describes a comprehensive method of MPRT evaluation for the oblique viewing direction. By using a tilted camera configuration, the angular dependency of MPRT is investigated for the condition that the horizontally scrolling patterns are observed from the vertical direction. For each gray‐to‐gray transition, distinct changes in MPRT and the luminance profile of blur are observed.     

Analysis of electro‐optical properties of polymer‐stabilized OCB and the application to TFT‐LCDs

Abstract— A 9‐in. full‐color polymer‐stabilized OCB TFT‐LCD with stable bend alignment in the absence of an electric field was developed. The condition of the polymer stabilization, the characteristics of UV‐curable monomers, and their influence on the configurations of the polymer network in the cell were studied. Possible models of the configuration were proposed and their relationship to the electro‐optical properties was analyzed using a novel simulation method considering the distribution of anchoring effects from both alignment surfaces and the polymer network. It was suggested that a good performance such as high contrast ratio and fast response could be expected in the polymer network originating from newly developed monomers composed of multifunctional LC acrylates due to a relatively weak‐anchoring effect and presumably its localization near the alignment surfaces. By using the newly developed monomers under the optimized polymer‐stabilizing process, a high contrast ratio of 250:1 and fast response nearly equal to that of a conventional OCB cell were achieved.