乙烯二聚制高纯丁烯－1技术经济评价

本文对生产高纯度丁烯－１的Ａｌｐｈａｂｎｔｏｌ工艺进行了技术经济评价，认为该工艺条件简单、反应条件温和，而且投资少，所以很适合事在发展中国家应用。     

Synthesis, characterization, and catalytic properties of polysiloxanes with pendant 4-(3-pyridinyl)butyl and 4-(1-oxypyridin-3-yl)butyl groups

New silane monomers with the pendant 4-(3-pyridine)butyl group have been synthesized by hydrosilation of 3-(3-butenyl)pyridine with Me _n Si(OEt)_3-n H (n=0, 1) using a platinum catalyst. Only -addition products were observed. The products were characterized by elemental analysis, infrared,¹H- and¹³C-NMR spectroscopy, and gas chromatography-mass spectrometry. Hydrolysis-polycondensation of the difunctional monomer with a basic catalyst, Me₄NOH, gave a mixture of cyclic oligomers, principally cyclic tetramer, and linear homopolymer. Under similar reaction conditions, the trifunctional monomer gave crosslinked material which was soluble in common organic solvents. The linear homopolymer and crosslinked polymer were trimethylsilyl end-blocked with hexamethyldisilazane. The cyclic and end-blocked polymers were characterized by elemental analysis and spectroscopic methods. Molecular weights of the polymers were obtained by end-group analysis using¹H-NMR spectral data, size exclusion chromatography, and direct insertion-probe mass spectrometry. The cyclic, linear, and crosslinked materials were N-oxidized withm-chloroperoxybenzoic acid and characterized by spectroscopic methods. The polymeric N-oxide derivatives were shown to be effective transacylation catalysts in the synthesis of mixed carboxylic acid anhydrides in immiscible solvents (H₂O/CH₂Cl₂) under phase-transfer conditions. The implications of the results on the mechanism of catalysis are discussed.     

Crystallization and phase transformation kinetics of poly(1-butene)/MWCNT nanocomposites

Poly(1-butene)/MWCNT nanocomposites were prepared by simple melt processing technique. Crystallization, crystal-to-crystal phase transformation and spherulitic morphology were studied using differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and optical microscopy (OM). The non-isothermal crystallization exhibited higher values of Z_t derived from Avrami theory and lower values of F(T) obtained from Avrami-Ozawa analysis, while the isothermal crystallization revealed a significant increase in crystallization temperatures and lower crystallization half times compared to pristine PB. The observed changes in the crystallization kinetics were ascribed to the enhanced nucleation of PB in the presence of MWCNT. The nucleating activity calculated from the non-isothermal crystallization data revealed that the MWCNTs provide an active surface for the nucleation of PB. The optical micrographs exhibited significantly smaller crystallites with disordered morphology for the nanocomposites compared to the well defined spherulitic morphology for pristine PB. The rate of phase transformation from kinetically favored tetragonal to thermodynamically stable hexagonal form was noticeably enhanced as evidenced by the reduction in the half time for phase transformation from 58 h to 25 h for PB reinforced with 7% MWCNT.     

含给电子Z-N催化剂催化乙烯/1-丁烯共聚的研究

研究了两种含有给电子体分别为对硝基苯胺、乙二醇二甲醚的Ziegler-Natta催化剂催化乙烯与1-丁烯高压的共聚反应性能,主要考察了反应条件对聚合活性、聚合物物理性质的影响,同时采用红外光谱法测定了聚合物的支化度.研究表明,给电子体为乙二醇二甲醚的催化剂催化活性高于对硝基苯胺.反应条件如反应压力、温度、铝钛比对聚合活性、丁烯的插入率以及聚合物性质都有明显影响.高的反应压力有利于1-丁烯插入和聚合物堆密度的提高;反应温度在50℃时的聚合活性最大,聚合物的支化度较高,聚合物熔点较低;铝钛比为500时聚合活性高于低铝钛比的聚合活性.     

再生丁基橡胶与非极性不饱和橡胶共混物的性能研究

对再生丁基橡胶(RIIR)与非极性不饱和橡胶共混物的性能进行了研究。结果表明,RIIR易以填料的形式加入到非极性不饱和橡胶中使用,当RIIR以填料的形式加入到NR、BR及SBR中时,不仅使它们的耐热氧老化性及耐屈挠龟裂性得到明显改善,而且使NR及BR的撕裂强度及扯断伸长率提高;RIIR作为生胶与BR及NR共混,可改善BR的耐热氧老化性,提高NR的撕裂强度;SBR与RIIR共混,均使拉伸强度及撕裂强度降低;非极性不饱和二烯类橡胶与RIIR共混后,均使耐磨性降低。     

A study of structural determinants in the interleukin-1 fold

The structures of interleukin-1ß, basic fibroblastgrowth factor and Erythrina trypsin inhibitor have been analysedin order to determine whether the hydrophobic core remains conserved,even when the structures have extremely low sequence similarities.We find that there are significant differences in the way eachprotein achieves a satisfactory arrangement of core residuesand that positions which contribute to the core of one structureare not guaranteed to contribute to the integrity of another.Furthermore, the side-chain packing arrangements of these coreresidues vary significantly between the three structures. Duringthis analysis the side-chain rotamers for three independentlydetermined interleukin-1ß structures were also compared.It was found that although buried residues are generally inagreement the remaining residues frequently occupy differentrotamers in the three structures. This suggests that althoughmeaningful studies are possible for buried side-chains the resultsobtained from equivalent analyses of accessible residues shouldbe treated with caution. These results are discussed with specificreference to the optimization of side-chain packing in proteinsof known structure.     

改进的细菌觅食优化算法求解0-1背包问题

细菌觅食优化算法作为一种新兴的智能优化算法,一般用来解决连续域的问题。为了解决离散域问题,提出了一种改进的细菌觅食优化算法。采用线性递减的思想和随机的游动长度代替固定步长和随机游动方向,改进了趋向性操作方案,并将其应用于解决0-1背包问题。将改进的细菌觅食优化算法与遗传算法、离散粒子群优化算法及基本的离散化细菌觅食优化算法分别在小规模和大规模的0-1背包问题上进行了仿真比较,表明了改进的细菌觅食优化算法能取得较好的效果,寻优能力强。     

基于视觉感知机制的织物疵点轮廓检测

针对传统人工织物疵点检测存在的误检及低效等问题,提出了一种基于视觉感知机制的自适应织物疵点轮廓检测方法.首先,模拟视觉系统中视网膜感受野对视觉信息的处理机制对织物疵点图像进行滤波及疵点增强;其次,依据初级视皮层(V1)区对视觉信息响应的方向选择性机制构建织物疵点图像边缘检测模型,实现对织物疵点图像的边缘检测.最后,采用自适应阈值选择的方法对检测到的边缘进行二次处理,获得织物图像疵点的轮廓.为验证本文方法的有效性和准确性,对4类织物疵点图像进行测试,并定性和定量两方面进行比较分析,结果表明文中提出的方法能够较好地检测出织物疵点轮廓信息,不仅可以得到质量较高的织物疵点轮廓图像,而且在整个检测过程中能够自适应的选择参数,避免受人的主观因素影响,具有实际的应用价值.     

求解0-1背包问题的混合贪婪遗传算法

求解0-1背包问题（KP）的最优解的时候,传统遗传算法（GA）的局部求精能力不足而简单局部搜索算法的全局探索能力有限,针对上述问题,将这两个算法整合并提出了混合贪婪遗传算法（HGGA）。在GA全局搜索框架下增加局部搜索模块,并改进传统仅基于物品价值密度的修复算子,增加基于物品价值的贪婪混合选项,从而加速寻优过程。HGGA一方面引导种群在进化的优质解空间中展开精细搜索,另一方面依靠GA的经典操作算子开拓全局搜索空间,从而达到算法求精能力和开拓能力的良好平衡。HGGA分别在三组数据上做了测试,结果表明在第一组15个测试用例中的12个上,HGGA能够百分百找到最优解,成功率达到80%;在第二组小规模数据集上,HGGA的性能明显好于其他同类GA和其他元启发算法;在第三组大规模数据集上,HGGA较其他元启发式算法具有更好的稳定性和高效性。     

基于FPGA的TDM over IP的设计

设计一种TDM over IP的技术系统。该系统用FPGA将E1数据包通过串并转换到千兆以太网数据包,经IP网传输到终端设备,再通过并串转换将以太网数据包转换成E1数据包完成传输。经过软件和硬件测试验证了此系统在千兆以太网上传输的可行性,系统没有出现误码,固有输出抖动是0.55UI,最大峰值抖动指标均满足ITU-G.823标准要求。