基于J2EE的OA系统的设计与实现

随着我国电子政务建设的飞速发展,办公自动化软件在各级政府大量的推广应用,急需对现代化办公自动化系统进行深入研究。通过对J2EE架构的分析,提出了基于J2EE体系的办公自动化总体架构。以某市办公自动化系统的开发和实现为实例,分别阐述了各子系统的功能及设计方法。     

纯电动汽车太阳能辅助空调控制系统的硬件设计

纯电动汽车车载动力电池是其唯一的动力源且很有限,辅助设备消耗的电能减少了纯电动汽车的续驶里程,尤其是空调,所以开发高效的纯电动汽车空调系统是纯电动汽车能够被市场接受的关键。将纯电动汽车顶盖布满太阳电池,可以使空调系统的制冷能力增强,同时还能增加纯电动汽车的行驶距离。对小型纯电动汽车的太阳能辅助空调系统进行研究,设计出适合该空调的自动控制系统,可为纯电动汽车创造出一个更加舒适的驾驶和乘座环境。     

基于P89C668单片机的智能定硫仪系统设计

该仪器根据GB214-2007《煤中全硫的测定方法》库仑滴定法原理设计,全部测试过程采用单片机自动控制,系统主要侧重于电路简单、系统抗干扰能力强、测硫精度高和控制温度科学等方面的研制。该方法与目前采用的艾士卡重量分析法和高温燃烧中和法相比具有测定迅速、结果准确的优点。     

Magnetic and mössbauer studies on ductile Fe-Cr-Co permanent magnet alloys

Iron-chromium-cobalt alloys possess attractive magnetic properties combined with good formability and hence are identified as technologically important magnetic materials. Alloys with compositions Fe-28·9 Cr-15·6 Co and Fe-28·4 Cr-20·1Co (weight percent) have been studied. Heat-treatment parameters during thermomagnetic treatment viz temperature, time and external magnetic field were optimized with reference to magnetic properties. The fully treated anisotropic alloys develop remanence=11·5–12·0 kilo Gauss, coercivity=600–650 Oersted and energy product=4–4·5 million Gauss Oersted. Electron microscopic and Mössbauer spectroscopic techniques were used to identify the original and transformed phases. During the various stages of the development of the alloy, the changes in mechanical hardness were correlated with magnetic hardness.     

Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

基于J2EE平台的供应链管理系统研究

介绍了供应链管理的基本原理和实现技术，从平台基础、移植性、扩展性等多个角度对J2EE平台进行了相应的分析，提出了一个基于J2EE平台的供应链管理系统框架，并从系统结构、系统功能模块等方面进行了说明。     

Corrosion behaviour of Ni-Zr-Ti-Si-Sn amorphous plasma spray coating

Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous material was deposited by a vacuum plasma spraying technique onto steel and copper substrates in order to investigate their behaviour in a corrosive environment. For comparison, the same alloy was prepared as amorphous ribbons by melt spinning. The amorphous nature of the coatings and ribbons was characterized by XRD, DSC and TEM, while XPS and AES analyses were performed to understand the origin of passivation and mode of corrosion. The corrosion behaviour of the coating was studied in H₂SO₄ and HCl solutions open to air at room temperature. Potentiodynamic polarisation and galvanic coupling tests were carried out on the substrate and the coating. It was found that the formation of Zr-, Ti- and Si-rich passive oxide layers provide a high corrosion resistance in H₂SO₄ solution while the breakdown of the passive layer by chloride ion adsorption was responsible for pitting corrosion of the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous ribbons in HCl solution. Galvanic corrosion was the dominant corrosion mechanism for the coating/copper hybrid structure, in contrast to the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous coating, which efficiently protected the steel substrate in the corrosive environment.     

Effect of atmospheric pollutants on the corrosion of high power electrical conductors: Part 1. Aluminium and AA6201 alloy

The aim of this study was to evaluate the joint effect of marine and industrial pollutants on the atmospheric corrosion of aluminium and its AA6201 alloy. Weight loss was determined after 4, 11, 16 and 24 months exposure being morphology and attack intensity analysed through SEM-EDX. Both materials showed the most intense attack for the highest SO₂ contents. Good correlation among weight loss, attack depth and tensile strength to rupture with time and with pollutant contents was determined for both materials in most sites. The cause for low aggressiveness of the heaviest Cl⁻ polluted atmosphere on aluminium was electrochemically demonstrated.     

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Deposition of nanocrystalline TiO₂ coating at low temperature is becoming more attractive due to the possibility for continuous roll production of the coating for assembly lines of dye-sensitized solar cell (DSC) at a low cost. In this study, porous nano-TiO₂ coating was deposited by vacuum cold spraying (VCS) at room temperature on a conducting glass substrate using commercial P25 nanocrystalline TiO₂ powder. The microstructure of TiO₂ coating was characterized by field emission scanning electron microscopy (FESEM) and nitrogen adsorption test. A commercial dye (N719) was adsorbed on the surface of TiO₂ particles within the coating to assemble a DSC. The cell performance was evaluated by employing simulated solar light at an intensity of 100 mW/cm². The results showed that TiO₂ coating was deposited by the agglomerates of nano-TiO₂ powders. The Brunauer-Emmett-Teller (BET) test of the as-sprayed TiO₂ coating yielded a porosity of 49% and an average pore size of 17 nm. The assembled solar cell yielded a short-circuit current density of 7.3 mA/cm² and an energy conversion efficiency of 2.4%. The test results indicate that VCS was a promising method to deposit nanocrystalline TiO₂ coatings at low temperature applied to DSCs. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

Strain-rate dependence of low cycle fatigue behavior in a simulated BWR environment

The strain-rate dependence of low cycle fatigue behavior of ASTM A533B low-alloy steel was investigated in a simulated BWR environment. Fatigue resistance of the steel was found to be closely dependent on cyclic strain rate in high-temperature water. A tortuous cracking morphology was dominant at high strain rate and typical fan-like or quasi-cleavage cracking patterns were frequently observed on the corresponding fracture surface. An entirely straight cracking morphology, however, became dominant at low strain rate. Evidence of crack arrest was found on the fracture surface rather than fan-like or quasi-cleavage cracking patterns. The above cracking behavior in simulated BWR water may be attributed to a strain-rate-induced change in the dominant environmentally assisted cracking (EAC) mechanism from hydrogen-induced cracking to film-rupture/slip-dissolution-controlled cracking.