水解母液生产葡萄糖酸钙新工艺

葡萄糖酸钙的生产一般是以淀粉为原料经液化、糖化、发酵、中和、精制、结晶、干燥制得的。而以母液为原料，其原料成本低，工艺流程短，减少了营养元素的添加，大幅度地降低了生产成本，值得推广。     

对我厂防治加热管内碳酸钙垢的思索

分析了我厂两碱法原卤净化后,加热管内壁结碳酸钙垢的原因,探讨了我厂采取加盐酸、加阻垢剂、用超声波阻垢器的方法,以及对加热管内碳酸钙垢防治的情况和存在的问题.     

饲料级磷酸氢钙中氟的几种分析方法比较

本文采用茜素络合酮比色法和氟离子选择电极法对饲料磷酸氢钙进行氟的测定实验对比,得出常用的氟离子选择电极法完全可以代替经典的蒸馏比色法的结论。     

六铝酸钙材料的合成及其显微结构研究

分别采用轻质碳酸钙和活性氧化铝 ,或纯铝酸钙水泥和活性氧化铝为初始原料 ,反应烧结合成了六铝酸钙 (CA6)材料 ,研究了原料和成型压力对合成材料的烧结性能和显微结构的影响 ,同时借助于XRD、TG -DSC、SEM和EDAX等测试手段对其反应过程、物相变化和显微结构进行了分析和观察。研究结果表明 :(1) 130 0℃时 ,合成材料的主晶相为刚玉相和CA2 ,并开始有CA6形成 ;温度升至14 0 0℃ ,CA6大量生成 ;15 0 0℃时反应完成 ,产物全部为CA6相。 130 0～ 15 0 0℃时 ,上述反应表现为体积膨胀过程 ,试样的体积密度和径向线收缩率随温度的变化不大 ;而高于 15 0 0℃时 ,试样明显趋向烧结 ,体积密度升高 ,线收缩率加大。采用纯铝酸钙水泥和活性氧化铝合成的试样的体积密度均高于采用轻质CaCO3 和活性氧化铝的 ,尤其在烧成温度高于 15 0 0℃时。坯体的成型压力对这两种合成试样的烧结性能均没有显著影响。 (2 )合成六铝酸钙材料的晶粒形貌与合成工艺有关 ,制备片状晶粒的六铝酸钙材料需满足两个条件 :一是晶核有足够的发育空间 ,二是从晶核生长形成片状结构需足够的物质扩散。采用纯铝酸钙水泥和活性氧化铝为原料的试样 ,其CA6晶核很容易发育成片状晶形 ,且随着坯体成型压力的增加 ,片状CA6有向等轴状发展的趋势 ;采用     

有广阔市场前景的化工产品—过氧化钙

本文叙述过氧化钙的性质,并以实例说明过氧比钙在水产养殖、食品加上、果蔬保鲜。环境保护、农作物栽培、橡胶及化工等奋方面的应用。     

火焰原子吸收光谱法测定特殊硅铁中微量钙

采用氢氟酸、硝酸分解试样,加氯化铵络合钙,六次甲基四胺沉淀干扰杂质,控制体系的酸度为中性,加三乙醇胺作增感剂,镧盐作释放剂,以火焰原子吸收光谱法对特殊硅铁中微量钙进行测定,方法的相对标准偏差为1.72%~5.63%,回收率为92.00%~105.00%。     

火焰原子吸收光谱法测定芥蓝中钙、镁、铜和铁

火焰原子吸收法测定芥蓝中的钙、镁、铜和铁含量,相对标准偏差为1.45%~2.03%,回收率为96.8%~100.1%。结果表明芥蓝含有丰富的微量元素。     

An apparent kinetic model for the carbonation of calcium oxide by carbon dioxide

For the apparent kinetics of the carbonation reaction of calcium oxide by carbon dioxide, as a kind of noncatalytic gas–solid reaction, a model equation has been proposed as follows: X=kbt/(b+t), where X is the conversion of CaO; k, a kinetic rate constant (time⁻¹); b, a constant (time) equivalent to the time taken to attain half the ultimate conversion of CaO, and t, the time. As a result of analyses for some literature-reported data of CaO-carbonation conversion, it has been found that the rate of the carbonation can be well represented by dX/dt=k(1−X/X_u)², where X_u is the ultimate conversion of CaO, which is given by the product of two parametric constants, k and b. The constants k and b in the two rate control regimes of CaO-carbonation, chemical reaction control and diffusion control, have been determined as functions of temperature, respectively. The activation energy in the carbonation of surface CaO with CO₂ is estimated to about 72 kJ/mol regardless of the sources of CaO, however, that in the diffusion control regime appears differently as 102.5 (mesoporous CaO) or 189.3 kJ/mol (commercial-available CaO), possibly due to the morphological differences of the two CaO samples. From a practical point of view, the simple model equation proposed in this study deserves attention in that the CaO-carbonation behavior at working temperatures higher than 700 °C could be closely predicted.     

离子取代凝胶——ACA离子取代动力学模型

用动边界模型描述了海藻酸-壳聚糖-海藻酸(ACA)离子取代凝胶对2价离子的取代动力学过程.模型具有较好的可靠性，ACA离子取代凝胶对2价离子的取代属于颗粒扩散控制.ACA离子取代凝胶对Pb²⁺的反应级数是0.76.     

Sorption,diffusion, and swelling characteristics of sodium alginate and its blend membranes with poly(vinyl alcohol) in water–acetic acid mixtures

Sorption, diffusion, and swelling characteristics of sodium alginate and its blend membranes with poly(vinyl alcohol) were investigated for water–acetic acid mixtures by using a gravimetric method at 30, 40, and 50°C. The membranes were characterized by X‐ray diffraction and Fourier transform infrared techniques. Concentration‐independent diffusion coefficients were obtained by applying Fick's relationship before completion of equilibrium sorption. Permeation coefficients were calculated from sorption and diffusion coefficients. Concentration profiles of liquids were computed considering the sheet geometry for the membrane by solving Fick's equation under suitable boundary conditions. Arrhenius activation parameters were computed for the transport processes. Experimental results and calculated quantities were discussed to understand membrane–solvent interactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1139–1150, 2004