市售陈年切达奶酪风味特征及消费者喜好度研究

本文对来自5个国家、不同成熟度的陈年切达奶酪中挥发性风味物质进行了检测,同时结合感官评定指标,解析了市售切达奶酪风味特征的地域性差异以及中国消费者对于切达奶酪风味特征的偏好性。实验结果表明:不同来源的切达奶酪挥发性风味存在着地域差异,差异主要源于挥发性酸类物质。中国消费者对于切达奶酪的喜好度更倾向于奶香味和坚果味,而具有高强度气味、硫味、苦味明显的切达奶酪不受我国消费者欢迎。因此研发奶香味重、坚果味强,而硫味、苦味、气味强度等不明显的切达奶酪将更适合于我国的消费者。      

Microbial and chemical composition of Cheddar cheese supplemented with prebiotics from pasteurized milk to aging

Microbial and chemical properties of cheese is crucial in the dairy industry to understand their effects on cheese quality. Microorganisms within this fat, protein, and water matrix are largely responsible for physiochemical characteristics and associated quality. Prebiotics can be used as an energy source for lactic acid bacteria in cheese by altering the microbial community and provide the potential for value-added foods, with a more stable probiotic population. This research focuses on the addition of fructooligosaccharides (FOS) or inulin to the Cheddar cheese-making process to evaluate the effects on microbial and physicochemical composition changes. Laboratory-scale Cheddar cheese produced in 2 replicates was supplemented with 0 (control), 0.5, 1.0, and 2.0% (wt/wt) of FOS or inulin using 18 L of commercially pasteurized milk. A total of 210 samples (15 samples per replicate of each treatment) were collected from cheese-making procedure and aging period. Analysis for each sample were performed for quantitative analysis of chemical and microbial composition. The prevalence of lactic acid bacteria (log cfu/g) in Cheddar cheese supplemented with FOS (6.34 ± 0.11 and 8.99 ± 0.46; ± standard deviation) or inulin (6.02 ± 0.79 and 9.08 ± 1.00) was significantly higher than the control (5.84 ± 0.27 and 8.48 ± 0.06) in whey and curd, respectively. Fructooligosaccharides supplemented cheeses showed similar chemical properties to the control cheese, whereas inulin-supplemented cheeses exhibited a significantly higher moisture content than FOS and the control groups. Streptococcus and Lactococcus were predominant in all cheeses and 2% inulin and 2% FOS-supplemented cheeses possessed significant amounts of nonstarter lactic acid bacteria found to be an unidentified group of Lactobacillaceae, which emerged after 90 d of aging. In conclusion, this study demonstrates that prebiotic supplementation of Cheddar cheese results in differing microbial and chemical characteristics.     

Consumer perceptions of anticake agents on shredded Cheddar cheese

Prepackaged natural cheese shreds are a growing consumer category. Anticake agents are applied to commercial cheese shreds to assist with shelf life and ease of use. The objective of this study was to investigate consumer perception of 3 anticake agents applied at various levels to Cheddar cheese shreds. Three common anticake agents (80% potato starch/20% cellulose blend, 100% potato starch, or potato starch/corn starch/calcium sulfate blend) were applied to duplicate lots of Cheddar cheese shreds at 1, 2, 3, 4, and 5% (wt/wt). Control Cheddar cheese shreds with no anticake were also included. Sensory properties (appearance, flavor, texture, and hot texture) were documented using a trained sensory panel (n = 8), and 3 consumer acceptance tests were also conducted. In test 1, consumers (n = 110) visually evaluated liking of cold shred appearance. In test 2, consumers (n = 100) evaluated melted shreds on a flour tortilla for overall liking and appearance, flavor, and texture liking. In test 3, consumers (n = 49) participated in a home usage test. Two-way ANOVA (anticake × anticake application rate) was used to interpret the collected data from each test. Visual appearance of shreds was the primary attribute influenced by anticake application and anticake agent. Trained panel evaluation demonstrated that the 100% potato starch anticake had minimal effects on visual appearance. The other 2 agents (80% potato starch/20% cellulose blend and potato starch/corn starch/calcium sulfate blend) showed increases in visible powder at >3% (wt/wt). Consistent with results from trained panelists, higher application rates decreased consumer appearance and color liking for Cheddar shreds with 80% potato starch/20% cellulose and potato starch/corn starch/calcium sulfate blends at >2 or 3% (wt/wt), respectively. Appearance liking of melted shreds decreased with increased anticake application percent but decreased the most for 100% potato starch anticake at greater than 1% (wt/wt) application. Overall liking, flavor liking, and texture liking attributes for melted shreds were negatively affected at >3% (wt/wt) application regardless of anticake agent used. In general, anticake agents can be applied to Cheddar cheese shreds at up to 3% (wt/wt) with minimal effect on consumer perception.     

Monitoring Proteolysis During Ripening of Full-fat and Low-fat Cheddar Cheeses by Reverse-Phase HPLC

Proteolysis during ripening of full-fat and low-fat Cheddar cheese was investigated by applying reverse-phase HPLC to the pH 4.6 water-soluble N fraction of cheese. The separated N compounds were divided into four MW ranges. The number of separated peaks and the amount of N compounds separated in each of the MW ranges increased with ripening time. Significant within-cheese, within-variety, and between-varieties differences in the amounts and proportions of N compounds with different MW were observed as related to ripening time. Reverse-phase HPLC of the pH 4.6 water-soluble N fraction of cheese can provide detailed quantitative information on proteolytic activities during ripening.     

Accumulation of Some Flavor Compounds in Full- and Reduced-fat Cheddar Cheese Under Different Ripening Conditions

Reduced-fat cheese showed higher levels of ethanol and lower acetoin than full-fat samples throughout ripening regardless of conditions. Total headspace volatiles, as well as butanoic and hexanoic acids, increased with ripening time and temperature. Full- and reduced-fat cheeses developed distinctly different headspace volatile profiles throughout ripening. The effects of ripening conditions were more notable in full-fat samples. Ripening reduced-fat Cheddar cheese at an elevated temperature for a limited time may enhance development of some desirable volatiles such as butanoic acid.     

Effect of sodium hexametaphosphate concentration and cooking time on the physicochemical properties of pasteurized process cheese

Sodium hexametaphosphate (SHMP) is commonly used as an emulsifying salt (ES) in process cheese, although rarely as the sole ES. It appears that no published studies exist on the effect of SHMP concentration on the properties of process cheese when pH is kept constant; pH is well known to affect process cheese functionality. The detailed interactions between the added phosphate, casein (CN), and indigenous Ca phosphate are poorly understood. We studied the effect of the concentration of SHMP (0.25-2.75%) and holding time (0-20 min) on the textural and rheological properties of pasteurized process Cheddar cheese using a central composite rotatable design. All cheeses were adjusted to pH 5.6. The meltability of process cheese (as indicated by the decrease in loss tangent parameter from small amplitude oscillatory rheology, degree of flow, and melt area from the Schreiber test) decreased with an increase in the concentration of SHMP. Holding time also led to a slight reduction in meltability. Hardness of process cheese increased as the concentration of SHMP increased. Acid-base titration curves indicated that the buffering peak at pH 4.8, which is attributable to residual colloidal Ca phosphate, was shifted to lower pH values with increasing concentration of SHMP. The insoluble Ca and total and insoluble P contents increased as concentration of SHMP increased. The proportion of insoluble P as a percentage of total (indigenous and added) P decreased with an increase in ES concentration because of some of the (added) SHMP formed soluble salts. The results of this study suggest that SHMP chelated the residual colloidal Ca phosphate content and dispersed CN; the newly formed Ca-phosphate complex remained trapped within the process cheese matrix, probably by cross-linking CN. Increasing the concentration of SHMP helped to improve fat emulsification and CN dispersion during cooking, both of which probably helped to reinforce the structure of process cheese.     

Efficacy of polyethylene-based antimicrobial films containing principal constituents of basil

The feasibility of low-density polyethylene (LDPE)-based films containing linalool or methylchavicol as antimicrobial (AM) packages to retard microbial growth on food surfaces was investigated. The AM LDPE-based films were tested for inhibition against selected microorganisms. Both compounds retained their AM activity, after an extrusion film-blowing process, against Escherichia coli in solid medium. Cheddar cheese was wrapped with the AM films and the packaged cheese samples were stored at 4 °C. The changes in the mesophilic aerobic bacteria and coliform, as well as yeast and mould counts were monitored. In addition, cheese samples inoculated with E. coli or Listeria innocua were wrapped with the AM films, stored at refrigerated (4 °C) or at abuse (12 °C) temperatures and the count of these microorganisms was monitored as a function of time. The results showed an inhibitory effect of these AM films against microbial growth in naturally contaminated cheese and in inoculated samples. The effect on suppression of E. coli and L. innocua growth was more pronounced at the abuse temperature. Methylchavicol-LDPE-based film exhibited a higher efficacy of inhibition than that of linalool-LDPE-based film. In addition, a sensory evaluation was performed with regards to possible taint in the flavour of the cheese. Taint in flavour as affected by linalool or methylchavicol was not significantly detectable by the panelists at the end of the storage period of 6 weeks. This study shows the potential use of polymeric films containing the principal constituents of basil as the AM components for enhancing quality and safety of cheeses.     

A model system for studying the effects of colloidal calcium phosphate concentration on the rheological properties of Cheddar cheese

A novel model system was developed for studying the effects of colloidal Ca phosphate (CCP) concentration on the rheological properties of Cheddar cheese, independent of proteolysis and any gross compositional variation. Cheddar cheese slices (disks; diameter = 50 mm, thickness = 2 mm) were incubated in synthetic Cheddar cheese aqueous phase solutions for 6 h at 22°C. Control (unincubated) Cheddar cheese had a total Ca and CCP concentration of 2.80 g/100 g of protein and 1.84 g of Ca/100 g of protein, respectively. Increasing the concentration of Ca in the synthetic Cheddar cheese aqueous phase solution incrementally in the range from 1.39 to 8.34 g/L significantly increased the total Ca and CCP concentration of the cheese samples from 2.21 to 4.59 g/100 g of protein and from 1.36 to 2.36 g of Ca/100 g of protein, respectively. Values of storage modulus (index of stiffness) at 70°C increased significantly with increasing concentrations of CCP, but the opposite trend was apparent at 20°C. The maximum in loss tangent (index of meltability/flowability) decreased significantly with increasing concentration of CCP, and there was no significant effect on the temperature at which the maximum in loss tangent occurred (68 to 70°C). Fourier transform mechanical spectroscopy showed the frequency dependence of all of the cheese samples increased with increasing temperature; however, solubilization of CCP increased the frequency dependence of the cheese matrix only in the high temperature region (i.e., >35°C). These results support earlier studies that hypothesized that the concentration of CCP strongly modulates the rheological properties of cheese.     

Improvement of texture and structure of reduced-fat Cheddar cheese by exopolysaccharide-producing lactococci

The objective of this study was to evaluate the effect of capsular and ropy exopolysaccharide (EPS)-producing strains of Lactococcus lactis ssp. cremoris on textural and microstructural attributes during ripening of 50%-reduced-fat Cheddar cheese. Cheeses were manufactured with added capsule- or ropy-forming strains individually or in combination. For comparison, reduced-fat cheese with or without lecithin added at 0.2% (wt/vol) to cheese milk and full-fat cheeses were made using EPS-nonproducing starter, and all cheeses were ripened at 7°C for 6 mo. Exopolysaccharide-producing strains increased cheese moisture retention by 3.6 to 4.8% and cheese yield by 0.28 to 1.19 kg/100 kg compared with control cheese, whereas lecithin-containing cheese retained 1.4% higher moisture and had 0.37 kg/100 kg higher yield over the control cheese. Texture profile analyses for 0-d-old cheeses revealed that cheeses with EPS-producing strains had less firm, springy, and cohesive texture but were more brittle than control cheeses. However, these effects became less pronounced after 6 mo of ripening. Using transmission electron microscopy, fresh and aged cheeses with added EPS-producing strains showed a less compact protein matrix through which larger whey pockets were dispersed compared with control cheese. The numerical analysis of transmission electron microscopy images showed that the area in the cheese matrix occupied by protein was smaller in cheeses with added EPS-producing strains than in control cheese. On the other hand, lecithin had little impact on both cheese texture and microstructure; after 6 mo, cheese containing lecithin showed a texture profile very close to that of control reduced-fat cheese. The protein-occupied area in the cheese matrix did not appear to be significantly affected by lecithin addition. Exopolysaccharide-producing strains could contribute to the modification of cheese texture and microstructure and thus modify the functional properties of reduced-fat Cheddar cheese.