钢结构设计及轻型钢结构应用

介绍了钢结构的适用范围、形式、布置要求以及进行结构分析的方法，探讨了结构软件的应用以及构件的优化选型，促进了钢结构在土木工程建筑中的广泛应用。     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry     

Danckwerts’ law for mean residence time revisited

This paper shows that Danckwerts’ law for mean residence time in a vessel with continuous and steady throughflow holds for a stochastic model based on a Markov chain for the particle spatial position, under a set of three very general conditions on the transfer probabilities. These are natural conditions and represent mass balance conditions on the transfer between spatial regions in the process. It is shown that a stochastic model for particle residence time distribution with these three conditions may describe almost any physical flow configuration, and also covers published mathematical RTD models, independent of their mathematical form or the nature of the associated boundary conditions, models for which Danckwert's law has hitherto been shown to be satisfied on a case-by-case basis. Two examples, namely those birth-death Markov chains and fluidized bed models are discussed.     

The significance of chemical markers in the bioprocessing of fossil fuels

Biochemical conversion of crude oils is a multi-step process proceeding through a series of biochemical reactions. These reactions can be characterized by a set of chemical markers which are associated with the chemical composition of crude oils. Reactions with heavy crude oils indicate that there is an overall decrease in the concentration and chemical speciation of organic sulfur compounds, and a redistribution of hydrocarbons and organometallic species. The contents of trace metals in the crude oils, such as nickel and vanadium, also decrease. Further, heavy ends of crudes, containing the asphaltenes and the polar nitrogen, sulfur, and oxygen containing fractions, as well as the organometallic compounds and complexes, are biochemically converted to lower molecular weight chemical species. In the studies reported in this paper, microorganisms used to mediate such reactions were thermophilic ( > 60°C) and pressure tolerant (up to 2500 psi). These organisms are also capable of biochemical conversion of bituminous and lignite coals in an analogous manner to their action on crude oils and follow similar trends characterized by chemical markers. For example, X-ray absorption near-edge structural (XANES) analyses of biotreated crude oils and low grade coals show that biochemical reactions lead to decreases in organic sulfides and thiophenes with a concurrent increase in sulfoxide contents. Chemically related constituents present in heavy crude oil fractions and low grade coals are the asphaltenes. Asphaltenes are complex structures containing heteroatoms and metals involved in inter- and intra-molecular bridges and stereochemical configurations. The chemical markers associated with the biochemical conversion of oils and coals indicate multiple biochemical processes involving chemical reactions at sites containing heteroatoms and metals leading to a breakdown of the structure(s) to smaller molecular weight units. Thus, using chemical markers as diagnostic tools, the extent and the efficiency of fossil fuel bioconversion may be predicted and monitored, allowing for better cost-efficient field trials. Recent results in this area will be presented and discussed in this paper.     

高放废液化学成分分析

概述了高放废液中25种阳离子、5种阴离子以及总蒸残物、总氧化物、密度和游离酸的分析方法。对核燃料后处理高放废液进行取样分析,其主要化学成分采用两种以上不同原理的方法作对比测定,结果相互符合情况良好,为高放废液处理处置研究设计,提供了完整、准确的基础数据。     

Surface characteristics of fluorine-modified PAN-based carbon fibers

Different fluorination methods were applied to modify the surface properties of carbon fibers. The relationship between the degree of fluorination and the physicochemical properties of carbon fibers was studied using a combination of mechanical tests, elemental analysis (EA), X-ray photoelectron spectrometry (XPS), and X-ray diffraction (XRD). EA and XPS analyses of fluorinated carbon fibers showed that treatment with mixtures of F₂/O₂ introduced a much higher fluorine concentration than that with F₂ only. However, XRD analysis showed that there was no increase in the interlayer distance, due to the mild fluorination condition applied. Consequently, the oxyfluorination was one of the more effective methods to increase surface polarity of carbon fibers, which probably played an important role in improving the tensile properties of the fibers in the epoxy resin system.     

略论贵州省化工企业职业教育的发展

从目前市场需求和就业率出发，进行形势分析，提出优化专业设置、加强实践环节、提高高职学院办学层次、推进“双证书”制度等改革方法，以促进化工职业教育的发展。     

Analytical characterization of cadmium cyanamide in CdS thin films and bulk precipitates produced from CBD process in pilot plant

CdS thin films and bulk precipitates were obtained by chemical bath deposition (CBD) in a well-closed reactor. X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, thermal analysis, elemental analysis and leaching have been used to characterize solids and thin films. It has been shown that the proportion of cadmium cyanamide in solids may vary from about 50% to 2% according to physicochemical conditions in solution (time after CBD, ammonia concentration) and that CdO results from CdCN₂ after air annealing of thin films. This last step also increases the crystallinity of the films.     

塔巴庙区块气层录井参数分析研究

塔巴庙区块气藏属于低压、低渗气藏,储集层物性差异大、含气级别高,但含气非均质性强,录井解释评价困难。针对这一问题,开展了综合判断储集层物性和含气性方面的研究,分别探讨了钻时与全烃、钻井液性能与全烃、钻井液粘度与全烃、气测显示与测井参数和烃组分与气显示之间的关系,分析了其相关性及其在塔巴庙区块气层解释评价中的意义及作用。通过相关性研究,不但摸索出定性解释评价气层的方法,同时为今后深入研究录井相关参数关系,探索其内在规律,为实现准确解释评价储集层奠定了基础。     

Stress analysis of pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain components

The aim of this study is to examine the effects of various loading conditions on the stress of a pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain component. A numerical and experimental study was carried out to determine the stress distribution of composite conveying chain components used to convey loads. For the experimental study, an apparatus was developed to simulate chain components in real motion. Two different working conditions of the chain component were investigated. The first condition represents the movement of the chain components without loading. In the second condition, the chain component touches and moves the load. The commercial finite element package ANSYS was used to perform the numerical analysis using a three dimensional eight-noded layered structural solid elements. Chain tensile forces were loaded through pins and chosen as 250, 500, 750, 1000 and 1250 N for the two conditions of chain components. Experimental and numerical studies were compared and discussed for two conditions and five different tensile forces. A good agreement between experimental results and numerical predictions is obtained.