转化乳剂的离子电导和光电导研究

本文研究了ＡｇＢｒＣｌ转化乳剂的离子电导和光电导。随着乳剂中溴含量的增高，其离子电导也随之升高，而光电子寿命则降低。ＡｇＢｒＣｌ乳剂的离子电导主要取决于其组成；ＡｇＢｒＣｌ转化乳剂的光电子寿命主要受隙间银子浓度的影响，隙间银离子浓度越大，光电子寿命越短。     

乳液聚合中单体醋酸乙烯酯与保护胶体聚乙烯醇的接枝反应研究

研究了以聚乙烯醇为保护胶体的醋酸乙烯乳液聚合中,聚乙烯醇与单体的接枝反应。探讨了引发剂用量、聚合反应温度、保护胶体聚合度等因素对接枝反应的影响。     

聚合转化率对硫调型氯丁胶结构与性能的影响

研究了硫调型氯丁橡胶乳液聚合中转化率对产晶结构与性能的影响.结果表明,随单体转化率的提高,聚合物的凝胶量及其交联密度增大,致使断链速度减慢,所得断链胶的门尼粘度上升,残存凝胶量增加,分子支化程度增大,分子量分布变宽,焦烧时间缩短。而相应硫化胶的拉伸强度、撕裂强度、冲击弹性和硬度等提高,扯断伸长率和永久变形下降。这些变化一般在转化率为80——85％时有明显转折.综合考虑产量与质量,聚合转化率控制在82±2％较为适宜。     

油水乳化液流变性研究进展

综述了油水乳化液流变性研究进展，介绍了目前国内外乳化液流变性的研究情况、乳化液的流变模式及乳化液流变性的评价方法。乳化液的剪切应力-剪切速率关系明显受油滴尺寸的影响，在含油量一定时，表观黏度随油滴尺寸的减小而增加。绝大多数乳化液在低剪切速度下(低于50s^-1)，呈现剪切变稀行为；在剪切速率超过1000s^-1时呈现牛顿行为。高含水原油的视黏度是温度、含水率以及剪切速率的函数。介绍了乳化液的3种流变模式，并给出了流变性评价方法实例。提出了油水乳化液流变性研究的发展方向。     

铝箔纸胶粘剂的制备

由醋酸乙烯和丙烯酸酯所制得的共聚物，能够极大地提高乳液对铝箔和纸张之间的粘合力，通过调整保护胶体聚乙烯醇的用量和增塑剂邻苯二甲酸二丁酯在反应过程中的不同加入方式，可以控制和生产所需要的乳液粘度，流平剂的加入，则改良了乳液在铝箔上胶时的流平性。     

乳胶制品生产的工序能力分析及质量控制

本文分析了乳胶制品的生产过程，并对工序能力指数进行了分析，从而推断出产品的质量。     

Weathering modification of acrylic emulsion by introducing UV absorbing groups

A new kind of UV-absorbing silicon-fluorinated acrylic emulsion was prepared by emulsion polymerization with 4-allyloxy-2-hydroxybenzophenone, 3-methacryloxypropyltrimethoxysilane (MPS) and hexafluorobutyl methacrylate (HFMA) as functional monomers. The emulsion and its coating were characterized by transmission electron microscope, Fourier transform infrared spectrum (FTIR), X-ray photoelectron spectroscopy, ultraviolet absorption spectrum,thermo-gravimetric analysis, water contact angle (CA), and artificial accelerated aging test. The results indicated that the emulsion with core-shell structure was synthesized and showed prominent absorption peaks at 320 and 350 nm. The water CA of the coating was increased from 70.2° to 86.7° because of the incorporated HFMAs and MPSs. Both of the initial and final decomposition temperatures of the coating were increased by more than 20°C compared with those of the unmodified coating. After 10 days of accelerated aging, the color difference (ΔE) and rate of loss of gloss (ΔG) were only 2.78% and 5.22%, while those of the unmodified coating were as high as 22.94% and 78.57%, respectively. Because of the UV absorbers were incorporated by chemical reaction, the new coating had a more durable and effective anti-ultraviolet performance compared with the coatings the UV absorbers were introduced by physical blending.     

Kinetics of styrene emulsion polymerization with a stable monomer radical

We have analyzed the electrical conductivity of a linear high charge density polyelectrolyte aqueous solution, finding that the counterion association order follows the same pattern as that described for a cyclic monomeric polyelectrolyte, i.e. NO > Br^? > Cl^? > F^?. However, these counterions interact in a very different manner with this polyion, making Eisenberg's relationship inapplicable in this system. Consequently, an alternative method is proposed for treating data.     

VAc／MMA半连续乳液共聚合的研究：Ⅰ种子乳液共聚合

以过硫酸铵为引发剂，十二烷基硫酸钠为乳化剂，于７０℃下进行了ＶＡｃ＝ＭＭＡ种子乳液共聚合。试验考察了组分和操作条件对体系稳定性，聚合速度及组成分布等的影响，同时，从理论上给出了加料速率与体系稳定性因子间的关系。     

乳胶漆对比率的影响因素

讨论了影响乳胶漆对比率的各种因素。