The effect of Al content on the wettability between liquid iron and MgOAl2O3 binary substrate

In the present study, the wettability between liquid iron with two different Al contents and MgOAl₂O₃ binary substrates was studied in reducing atmosphere. The contact angles between liquid iron with 18?ppm Al and MgO, MgO·Al₂O₃, Al₂O₃ were 133.5°, 113.7°, 126.9° respectively. With the variation of the substrate composition, the contact angles for the intermediate binary phases of the three components (MgO, MgO·Al₂O₃, Al₂O₃) obeyed the Cassie theory. In the experiment using iron with 370?ppm Al, all the contact angles were higher than that using low Al-containing iron. The surface of the iron drop was covered with an oxide layer, which mainly consisted of many small particles. With the variation of the substrate gradually from MgO to Al₂O₃, the composition of the oxide layer changed from MgO·Al₂O₃ to CaOAl₂O₃. The formation of the oxide layer prevented the spreading of liquid iron, leading to the increase of the contact angle.     

A PRACTICAL METHOD FOR RECTIFYING INTERFACIAL TENSION DATA TO PREDICT THE SHAPE OF INTERFACES IN AN IMMISCIBLE LIQUID/LIQUID/GAS SYSTEM

The shape of interfaces formed by the contact of two liquid phases, immiscible with each other, and a gaseous phase can be predicted on the condition that the tension to work at each interface is known with a sufficient accuracy. In general, interfacial tension data available are not so accurate, however, as to be useful as they are in predicting the shape of interfaces, particularly when the spreading coefficient of either liquid (liquid 1) on the other (liquid 2) has a negative value of a small magnitude. Presented in this note is a simple method to rectify the interfacial tension data, with the aid of a measurement of the radius of a lens of liquid 1 of a known volume placed on the horizontal surface of liquid 2, and thereby make them usable for predicting interfacial geometries. The method is tested by applying it to benzene/water and n-pentane/water systems.     

The elusive role of the N-terminal extension of {beta}A3- and {beta}Al-crystallin

ß-Crystallins are structural lens proteins with aconserved two-domain structure and variable N- and C-terminalextensions. These extensions are assumed to be involved in quaternaryinteractions within the ß-crystallin oligomers orwith other lens proteins. Therefore, the production of ßA3-and ßAl-crystallin from the single ßA3/A1mRNA by dual translation initiation is of interest. These crystallinsare identical, except that ßAl has a much shorterN-terminal extension than ßA3. This rare mechanismhas been conserved for over 250 million years during the evolutionof the ßA3/A1 gene, suggesting that the generationof different N-terminal extensions confers a selective advantage.We therefore compared the stability and association behaviourof recombinant ßA3- and ßAl-crystallin.Both proteins are equally stable in urea- and pH-induced denaturationexperiments. Gel filtration and analytical ultracentrifugationestablished that ßA3 and ßA1 both form homodimers.In the water-soluble proteins of bovine lens, ßA3and ßA1 are present in the same molecular weight fractions,indicating that they oligomerize equally with other ß-crystallins.¹H-NMR spectroscopy showed that residues Met1 to Asn22 of theN-terminal extension of ßA3 have great flexibilityand are solvent exposed, excluding them from protein interactionsin the homodimer. These results indicate that the differentN-terminal extensions of ßA3 and ßA1 donot affect their homo- or heteromeric interactions.     

Preparation and characterization of electroplated amorphous gold-nickel alloy film for electrical contact applications

A process for electroplating amorphous gold-nickel alloy with the atomic ratio of unity was developed. The plating bath was prepared by adding potassium cyanoaurate(I) into a known plating bath which produces amorphous nickel-tungsten alloy. At a sufficiently high gold concentration, the alloy deposit did not contain any tungsten. The amorphous nature of the Au-Ni alloy produced in the new bath was confirmed by using TEM and THEED. Hardness, resistivity, and contact resistance of this new alloy were determined, and the results are discussed for applications as an electrical contact material.     

Direct observation of induction period of MTO process with consecutive pulse reaction system

The initial transformation of methanol over HZSM-5 catalyst was investigated by a consecutive pulse reaction system. The reactant–catalyst contact time influenced the initial methanol transformation and the performances implied methanol reaction in induction period or under steady-state condition. The induction period, in which an organic-free HZSM-5 catalyst could be transferred to a working catalyst, were directly observed. The analysis result of the product stream predicted hydrogen-deficient species deposition over catalyst surface at the beginning of MTO reaction. The hydrogen transfer level of steady-state MTO reaction also varied with reaction contact time.     

用接触角法测量聚合物共混体系的表面性能

利用接触角的方法研究了聚合物HDPF、PET及其共混物HDPE／PET的表面自由能、极化度以及与不同液体一水和甘油间界面张力的大小。     

LC GRIN lens mode with wide viewing angle for rotatable 2D/3D tablet

To widen the vertical and horizontal angular ranges where the lens performs well, the off‐axis performance of a liquid crystal gradient index (LC GRIN) lens is analyzed by the combined simulation system of an LC director simulator and a ray‐tracing simulator. We found that the angular difference between an LC alignment direction and an electrode array direction of the LC GRIN lens is one of significant parameters, and detailed conditions of structure are established. The measurement result shows that the developed structure reduces the degradation ratio in a luminance profile from 61% to 3.2%. We have applied a user tracking system for the rotatable 3D display, equipped with a detection of a panel orientation and a face position. As a result, we have developed a rotatable 2D/3D tablet whose 3D viewing azimuth angle is over 30° in both landscape and portrait orientations.     

Experimental investigation of particle contact time at the wall of gas fluidized beds

The contact time of particles at the walls of gas fluidized beds has been studied using a radioactive particle tracking technique to monitor the position of a radioactive tracer. The solids used were sand or FCC particles fluidized by air at room temperature and atmospheric pressure at various superficial velocities, covering both bubbling and turbulent regimes of fluidization. Based on the analysis of tracer positions, the motion of individual particles near the walls of the fluidized bed was studied. The contact time, contact distance and contact frequency of the particles at the wall were evaluated from these experimental data. It was found that in a bed of sand particles, the mean wall contact time of the fluidized bed of sand particles decreases by increasing the gas velocity in the bubbling and increases in the turbulent fluidization. In other words, the particle-wall contact time is minimum at the onset of turbulent fluidization in the bed of sand particles. However, the mean wall contact time is almost constant in both regimes of fluidization in the bed of FCC particles. All the existing models in the literature predict a decreasing contact time when the gas velocity in the bed is increased. It was also shown that the contact distance increases monotonously by increasing the gas velocity in the bed of sand particles, while it is almost constant for the bed of FCC particles. Contact frequency has a trend similar to that of the contact time for both sand and FCC particles.     

大口径光学透镜瞬态温度场模拟

为考察热辐射效应对光学元件稳、瞬态温度场的影响,给出了考虑辐射和导热耦合换热情况下复杂几何结构光学透镜稳、瞬态热特性的适体坐标下离散坐标法.对喷管形和圆柱形介质进行计算并与其他方法比较表明,建立的适体坐标系下辐射与导热耦合换热计算方法精度较好.对两端为球缺中间为圆柱的大口径透镜内的辐射与导热耦合换热过程进行了数值模拟.计算结果表明,为了精确地预测半透明介质如透镜内的温度分布,应该考虑辐射与导热耦合作用,且应当考虑介质的光谱特性.