多人决策的一类相对均衡解

本文分析由于决策人偏好不同而引起决策差异的多人多目标决策问题，提出了这类决策问题的一类相对均衡解的概念和求取方法。相对均衡解以决策群体偏好的加权集结为基础，能最大程度地反映每个决策人的偏好。文中研究相对均衡解的ＳＷＴ求取方法，并给出了求解的步骤。     

Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

A computational model for analysing interactive buckling and delamination growth in composite structures

In this paper, a unified method is presented: (i) to model delaminated stiffened laminated composite shells; (ii) for synthesising accurate multiple post-buckling solution paths under compressive loading; and (iii) for predicting delamination growth. A multi-domain modelling technique is used for modelling the delaminated stiffened shell structures. Error-free geometrically nonlinear element formulations — a 2-noded curved stiffener element (BEAM2) and a 3-noded shell element (SHELL3) — are used for the finite element analysis. An accurate and simple automated solution strategy based on Newton type iterations is used for predicting the general geometrically nonlinear and postbuckling behaviour of structures. A simple method derived from the 3-dimensionalJ-integral is used for computing the pointwise energy release rate at the delamination front in the plate/shell models. Finally, the influence of post-buckling structural behaviour and the delamination growth on each other has been demonstrated.     

超高压输电线路分裂导线通道模式理论分析

本对分裂导线传输电磁波的模式理论进行了分析，从所解特征根中选择一组最简单的模分量传递信息，并阐述了传输规律。     

圆筒混合机振动和粘漏料问题及解决办法

对圆筒混合机长期未得彻底解决的振动、大型零部件寿命短、筒体内壁粘料、进料漏斗堵料与漏料等问题进行了原因分析；根据宝钢烧结分厂的实践经验提出了解决办法。     

用于X光激光实验的反射式线聚焦光学系统的设计和分析

基于三维光线追迹的象差计算,对卢瑟福实验室用离轴球面反射线聚焦系统作了分析。然后,首次提出了用于X光激光实验的两类新的反射式线聚焦构型,即反射式光楔列阵和光锥列阵系统,并作了计算。最后,对所得结果作了比较和讨论。     

A theoretical and photoelastic contact stress analysis relevant to orthopaedic knee prostheses

This study is based on a theoretical and photoelastic static contact stress analysis, relevant to the design of the plastic tibial plateau in an orthopaedic knee prosthesis. It involves the review of existing theoretical analyses concerned with the contact mechanics of layered elastic systems and, where possible, the validation of any relevant findings using two dimensional photoelasticity. Significant findings include the identification of a general minimum recommendable design thickness for the plastic tibial plateau, the endorsement of using the Hertzian contact theory to predict contact stress levels in the tibial plateau of certain knee implants and the slight improvement in contact conditions in the plastic when the plateau is perfectly bonded to its supporting metal tray.     

离子色谱技术在钻井现场的应用研究

将离子色谱技术(IC)应用于钻井现场的钻井液滤液分析,从而获取所钻井钻遇地层的可溶性矿物的性质、地层水的类型等资料信息。离子色谱技术在这一领域的应用尚属探索阶段,但通过现场两口井的试用已见到较好的应用效果,文章简介了该技术的应用前景及价值,如:确定油水界面的位置及指导钻井液的调配、确保井下安全等。这方面的论述,对分析化验仪器向井场转移实现多手段综合分析具有一定的促进作用。     

多目标二次规划非劣解集的理论生成及应用

本文对多目标二次规划问题非劣解集的理论生成进行了探讨,在介绍二次规划单目标问题优化解求法的基础上,提出了在决策平面上互切点,共交点轨迹的概念.由此导出了非劣解集的一般解析式(对切点解问题)和另一类交点解问题时的非劣解集求法,然后介绍了在目标平面非劣解集的解析表达式.使多目标二次规划问题整个非劣解集的推求严格、明确和方便,有理论和实际意义。文中以一个综合利用水库参数的多目标优选作为例子阐述了应用,并求出了最终的最佳协调解.     

对HIC试验中两种不同腐蚀介质酸碱度的探讨

HIC是腐蚀试验中常用的检测方法,用来测评材料在含硫化氢环境中对氢离子敏感性大小.其包含两种不同的腐蚀介质,不同的腐蚀介质中酸碱度是不一样的,腐蚀介质的酸碱度对试验结果有较大的影响,为此,运用电离平衡理论,计算并分析两种不同腐蚀介质电离平衡前后的氢离子浓度变化,得出动态反应平衡时氢离子浓度的关系式,从而获得介质中精确的氢离子浓度,并对腐蚀介质中相关离子进行了探讨,为进一步探究相关环境中的腐蚀机理提供了依据.