Drying of Probiotics: Optimization of Formulation and Process to Enhance Storage Survival

This work describes how probiotic bacteria can be dried at low temperature in two steps, combining spray drying and vacuum drying, in order to enhance their survival during storage. A sufficient number of dried probiotics survived storage for more than 3 months at 30°C, if an appropriate combination of protein and carbohydrate was selected as carrier and storage conditions were maintained optimal. The use of soy protein and maltodextrin or skim milk and arabic gum resulted in the best survival rates of probiotics during storage. No evident difference was found between different spray dryer configurations, although a cocurrent flow was preferred.     

Enzymatic Browning in Apple Pulps

Enzymatic browning in Golden Delicious apple pulp was studied as related to degree of ripeness and temperature (3.5–31°C). Green apple pulp showed the highest rate of browning. This was attributable to differences in ascorbic acid (AA) content and polyphenoloxidase activity in young fruits. The rate of browning determined by CIE L* measurements followed complex temperature dependent kinetics, represented by a multiple linear effects with log time. Equal changes in L* parameter yielded straight lines in a log temperature vs log time plot. Inhibition with AA caused an initial slow rate of browning and a well defined break point associated with exhaustion of antioxidant properties of the AA. The greater the AA concentration the longer the initial period.     

The effect of cooking on proteins from acha (Digitaria exilis) and durum wheat

The effect of cooking on proteins from acha and durum wheat was assessed from an analysis of protein extractability, gel electrophoretic profiles, in-vitro protein digestibility (IVPD) and the amino acid compositions of wholemeal flour and residue proteins. Heating wholemeal flour samples at 100–140°C (t = 10–40 min) resulted in 0–30% and 45–55% decreases in acha and durum protein solubility, respectively. In general, high molecular weight (30–70 k Da) protein subunits were more susceptible to heat damage. For both cereals, sodium dodecyl sulphate (SDS; 10 g litre^?1) and/or dithiothrcitol (DTT; 10 mM ) increased protein solubility in unheated and heated samples. The IVPD index was 90–91% and was not significantly altered by cooking (100–120°C, t = 40 min). Cooking at extreme temperatures (140°C, t = 40 min) reduced the IVPD by 8% (P = 0.05). Osborne fractionation resulted in a durum or acha residue level of 7.8% or 55.2%. Treatment with solvent containing propanol, SDS and/or DTT at room temperature followed by SDS-polyacrylamide gel electrophoresis of non-solubilised proteins showed that the glutelin fraction of acha, with the exception of a 65 kDa subunit, was insoluble owing to strong inter-subunit hydrophobic and disulphide interactions. Wholemeal acha flour and residue protein showed a significantly greater level of hydrophobic and sulphur amino acids as well as glutamine which is associated with H-bonding. The possibility that cereal protein solubility is also dependent on protein-carbohydrate links is discussed.     

皮革去污上光用乳化蜡的研制

采用石蜡、微晶蜡为主要原料 ,经实验选出了以水为稀释剂的乳化型皮革去污上光蜡。实验优化的配方为石蜡 12 .5 g ,微晶蜡 8.0 g ,硬脂酸 8.5g ,三乙醇胺 5 .5 g ,水量 70 (涂用 )或 130 g(喷用 )。反应条件为乳化时间 4 0min ,搅拌速度 5 0 0～ 70 0r/min ,乳化温度 90℃。制得上光剂产品的去污性能可与用去污剂单独处理的效果相当 ,亮度可达 6 6 .7。     

Determination and Health Implication of the Erucic Acid Content of Broccoli Florets, Sprouts, and Seeds

The erucic acid content of broccoli florets, sprouts, and seeds was found to be about 0.8, 320, and 12100 mg/100 g, respectively. Using the erucic acid limit established for canola oil in the U.S.A. and Canada as a guideline, the estimated dietary intake of erucic acid from florets and sprouts was considered of little consequence, whereas in seeds a relatively small amount (about 35 g/wk) equaled our calculated exposure limit for erucic acid. Additionally, the most complete fatty acid distribution yet published for the various forms of broccoli are presented.     

提高压力过滤器滤套使用寿命的途径

佳木斯造纸厂从芬兰奥斯龙公司引进了一套新型、高效、低碱流失的压力过滤、洗涤苛化系统。本文就如何延长该系统主体元件──滤套的使用寿命这一技术问题，进行系统的阐述。     

硼酸使掺铁铝酸锂发光增强的现象

在硼酸存在下合成了掺铁铝酸锂荧光体,研究了在不同温度下硼酸加入量对荧光体发光强度的影响,并通过X射线粉末衍射和粒度分析,初步探讨了发光增加的原因。     

Investigation of Scale Formation in Heat Exchangers of Phosphoric Acid Evaporator Plants

The primary problem in concentrating phosphoric acid is due to fouling on the tube‐side of the heat exchangers of the evaporator units. Scaling on the heat transfer surfaces occurs because of high supersaturation of phosphoric acid liquor with respect to calcium sulphate. A review of the existing literature reveals that no information is available on heat transfer and on crystallization fouling of industrial phosphoric acid solutions. In this investigation, the solubility of different calcium sulphate types in phosphoric acid solution was studied and its dependency on acid concentration and temperature was investigated. A large number of fouling experiments were carried out in a side‐stream of a phosphoric acid plant at different flow velocities, surface temperatures and concentrations to determine the mechanisms, which control the deposition process. After identifying the effects of operational parameters on the deposition process, a model was developed for prediction of fouling resistances. The reaction of calcium sulphate crystallization followed a second order rate with respect to the supersaturation. The activation energy evaluated for the surface reaction of the deposit formation was found to be 57 kJ/mol. The predicted fouling resistances were compared with the experimental data. Quantitative and qualitative agreement between measured and predicted fouling rates is good.     

Analytic and numerical calculations of the formation of a sulphuric acid aerosol in the upper troposphere

Analytic and numerical calculations are performed on the production of sulphuric acid aerosol in conditions of a very large nucleation event observed in the upper troposphere. The numerical results feature a growing peak in the size distribution whose magnitude is reproduced well analytically, and are consistent with the observed particle number concentration at sizes greater than 25 nm (measured dry diameter), but suggest that most of the aerosol was at unobserved smaller sizes. Because of growth and coagulation, number concentrations of the aerosol rapidly become independent of the number initially nucleated, so that conclusions as to the nucleation process, either homogeneous or ion-induced nucleation, cannot easily be drawn from existing atmospheric observations. The final concentration is very insensitive to the magnitude of the SO₂ source, but, if condensation on, and coagulation with, a remnant background aerosol occurs, such nucleation events will be cut off for source magnitudes less than a specific value. Anthropogenic emissions of SO₂ which exceed this value can produce higher aerosol number concentrations in the atmosphere with consequences for the indirect effect of aerosols on the climate.     

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006