Photostabilization of cationic UV-cured coatings in the presence of nanoTiO2

The effect of TiO₂ nanoparticles for sun-weathering protection of UV-cured coatings is investigated. TiO₂ is either introduced in the form of nanoparticles in the photocurable formulations or generated in situ via sol–gel process. Cured films containing comparable amounts of TiO₂ were weathered for 800 h under UV irradiation and compared with free-TiO₂ coating. The TiO₂ presence induces a clear lower mass loss decrease during weathering as well as a lower gel content decrease. The TiO₂ screen effect is also confirmed by a lower alkyl-band reduction monitored by FT-IR during weathering. The TiO₂ generated in situ via sol–gel gives rise to transparent coatings without interfering with photopolymerization process and therefore without compromising UV-cured film properties.     

乳胶涂料中填料粒径测定与分散剂的选择

介绍了重力沉降法和容量沉降法两种测定乳胶涂料中填料粒径的方法。通过比较粉体粒径结果显示：沉降法比激光法更形象直观，更能代表体系粒径真实情况。以滑石粉、重钙、轻钙粉体为基准，采用不同用量、不同类型的分散剂的容量沉降法进行比较得出：用容量沉降法能定量地对分散剂性能做出评价。     

专用粉末涂料和涂装发展的新展望

新型专用粉末涂料以其涂膜超薄型化、低温固化和高耐候性等优势,并以预裁割坯料新工艺代替预涂装卷材工艺的新特点,将成为粉末涂料新的增长点。还提出了若干建议和意见。     

Factors influencing magnetic polymer microspheres prepared by dispersion polymerization

Magnetic iron oxide (Fe₃O₄) was prepared by a coprecipitation method. Core–shell composite magnetic polymer microspheres with carboxyl groups were synthesized by the dispersion polymerization of styrene and acrylic acid in the presence of magnetic oxide, and dibenzoyl peroxide was used as an initiator. The synthesized magnetic polymer microspheres were characterized with X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and so forth. The results indicated that the product was single‐phase Fe₃O₄, and its average size was about 10 nm. The configuration of the microspheres, which contained carboxyl groups, was spherical, and the average size was about 2 μm. The results of vibrating sample magnetometry tests showed that the magnetic powders produced by different surfactants had different saturation magnetizations. When poly(ethylene glycol) with a weight‐average molecular weight of 4000 was used as a surfactant, the saturation magnetization of the samples reached 69.2 emu/g. The factors that affected the shape, magnetism, size, and distribution of the microspheres were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Image-based extended finite element modeling of thermal barrier coatings

Further advances in Thermal Barrier Coating (TBC) design are linked with the evolution of numerical models for TBCs. The present paper, therefore, enhances the idea of a currently available FEM package (OOF) that has been designed for microstructural level simulations. The approach of Extended FEM (XFEM) is incorporated in an in-house developed program to account for the existence of cracks in TBCs; both for stress-strain analysis and for heat transfer analysis. The new XFEM program is then employed to carry out the analyses of a YSZ deposit and a multilayered TBC to predict the effective Young's moduli, the overall thermal conductivities, and to assess the fracture behavior of the coating.     

Comparison between Ni-Cr-40vol%TiC wear-resistant plasma sprayed coatings produced from self-propagating high-temperature synthesis and plasma densified powders

Plasma sprayed Ni-Cr-40vol%TiC coatings produced from powders obtained by self-propagating hightemperature synthesis (SHS) and plasma densification (PD) processes are characterized. Chemical composition, microstructure, and mechanical properties, such as microhardness and wear resistance, are evaluated and compared. SHS coatings exhibit good sliding wear performance. The exact stoichiometry of titanium carbide inclusions in the metallic matrix affects the dimension of the crystal lattice parameter and was investigated by examining the shift of x-ray diffraction (XRD) peaks of the TiC. A value of the combined carbon/titanium ratio of about 0.6 was calculated for both powders, thus excluding the influence of the stoichiometry of the carbide inclusions on the wear properties of the coatings.     

Thermal spraying of biomaterials

Osteoconductive hydroxyapatite coatings for metallic endoprostheses for hip and knee joint replacement provide a state-of-the-art template for enhanced in-growth of bone cells. However, the high temperature of the plasma jet leads to large scale dehydroxylation and decomposition of the starting powder. A model is being developed to explain the formation of chemically and mechanically inhomogeneous porous calcium phosphate coatings deposited by atmospheric plasma spraying onto titanium alloy substrates. In addition the biofunctionality is being discussed of titania bond coats and their influence on the in vivo performance of hydroxyapatite-titania duplex coating systems.     

中高温光谱选择性吸收涂层的研究进展

太阳能是极其丰富的可再生能源,近年来,研究人员不断努力开发高吸收低发射、耐高温、持久耐候的高性能光谱选择性吸收涂层。本文主要介绍国内外科研工作者在中温和高温光谱选择性吸收涂层方面的研究工作和最新成果,并对其高温热稳定性及失效机理进行了探讨。     

Magnetic Properties of Thermal Sprayed Tungsten Carbide–Cobalt Coatings

In the information age, the storage and accessibility of data is of vital importance. There are several possibilities to fulfill this task. Magnetic storage of data is a well‐established method and the range of materials used is continuously extended. In this study, the magnetic remanence of thermally sprayed tungsten carbide–cobalt (WCCo)‐coatings in dependence of their thickness is examined. Two magnetic fields differing in value and geometry are imprinted into the coatings and the resulting remanence field is measured. It is found that there are two effects, which in combination determine the effective value of the magnetic remanence usable for magnetic data storage.