Synthesis, characterization and electrochromic properties of a conducting copolymer of pyrrole functionalized polystyrene with pyrrole

A well-defined polystyrene (PSt) based polymer containing at one end-chain 3,5-dibromobenzene moiety, prepared by atom transfer radical polymerization (ATRP), was modified in two reaction steps. First one constitutes a Suzuki coupling reaction between aromatic dibromine functional polymer and 3-aminophenylboronic acid, when a diamino-containing intermediate was obtained. The second step is a condensation reaction between the diamino functional polystyrene and 2-pyrrole aldehyde. Thus, a polymer containing a conjugated sequence having pyrollyl groups at the extremities was synthesized. The presence of oxidable pyrrole groups in the structure of the polymer permitted further electropolymerization. The structures of intermediate polymers were analyzed by spectral methods (¹H NMR, FTIR). Electrochemical copolymerization of pyrrole functionalized polymer (PStPy) with pyrrole was carried out in acetonitrile (ACN)-tetrabutylammonium tetrafluoroborate (TBAFB) solvent electrolyte couple. Characterization of the resulting copolymer were performed via Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), spectroelectrochemical analysis, and kinetic study. Spectroelectrochemical analysis show that the copolymer of PStPy with Py has an electronic band gap (due to π-π* transition) of 2.4 eV at 393 nm, with a yellow color in the fully reduced form and a blue color in the fully oxidized form. Via kinetic studies, the optical contrast %ΔT was found to be 20% for P(PStPy-co-Py). Results showed that the time required to reach 95% of the ultimate T was 1.7 s for the P(PStPy-co-Py).     

Development and characterization of silicone/phosphorus modified epoxy materials and their application as anticorrosion and antifouling coatings

Epoxy resin is chosen for our present study owing to its exceptional combination of properties such as easy processing, high safety, excellent solvent and chemical resistance, toughness, low shrinkage on cure, good electrical, mechanical and corrosion resistance with excellent adhesion to many substrates. This versatility in formulation made epoxy resins widely applied for surface coatings, adhesives, laminates, composites, potting, painting materials, encapsulant for semiconductor and insulating material for electric devices. There are numerous paint/coating systems based on epoxy resin available for corrosion and fouling prevention. They however are not completely satisfactory in field applications, where high corrosion, fouling and flame resistance are required. The demand for epoxy resin as corrosion/fouling resistant coatings is restricted mainly due to its inferior characteristics like poor impact strength, high rigidity, and moisture absorbing nature besides inadequate flame retardant properties. It is for this reason that silicones and phosphorus-based compounds are used as modifier in this work by intercrosslinking network mechanism (ICN) to obtain epoxy resin with desired properties ideally suitable for field applications for preventing corrosion and fouling with flame retardantancy. The present work involves the development of solvent free silicone/phosphorus modified epoxy coating systems, since solvent free coating systems are widely used for numerous applications due to their lower cost per unit film thickness, freedom from fire and pollution hazard and ability to provide better performance. For the development of coating systems, epoxy resin (X) serves as base material, hydroxyl terminated polydimethylsiloxane (HTPDMS) as modifier, γ-aminopropyltriethoxysilane (γ-APS) as crosslinking agent and dibutyltindilaurate (DBTDL) as catalyst. Polyamidoamine (A), aromatic amine adducts (B) and phosphorus-containing diamine (C) were used as curing agents. The study also describes the evaluation of corrosion resistant behaviour of unmodified epoxy and siliconized epoxy coatings by potentiodynamic polarization method, electrochemical impedance spectroscopy (EIS), salt-spray and antifouling tests. The results are discussed.     

Superior electric double layer capacitors using ordered mesoporous carbons

This paper reports for the first time superior electric double layer capacitive properties of ordered mesoporous carbon (OMCs) with varying ordered pore symmetries and mesopore structure. Compared to commercially used activated carbon electrode, Maxsorb, these OMC carbons have superior capacitive behavior, power output and high-frequency performance in EDLCs due to the unique structure of their mesopore network, which is more favorable for fast ionic transport than the pore networks in disordered microporous carbons. As evidenced by N₂ sorption, cyclic voltammetry and frequency response measurements, OMC carbons with large mesopores, and especially with 2-D pore symmetry, show superior capacitive behaviors (exhibiting a high capacitance of over 180 F/g even at very high sweep rate of 50 mV/s, as compared to much reduced capacitance of 73 F/g for Maxsorb at the same sweep rate). OMC carbons can provide much higher power density while still maintaining good energy density. OMC carbons demonstrate excellent high-frequency performances due to its higher surface area in pores larger than 3 nm. Such ordered mesoporous carbons (OMCs) offer a great potential in EDLC capacitors, particularly for applications where high power output and good high-frequency capacitive performances are required.     

Characterization and solubility measurement and prediction of selected arylamines in hexane, methanol and benzene

The solubility of nine arylamine molecules in benzene, methanol and hexane was measured. These molecules were: triphenylamine, N-(4-methyl phenyl) N,N bis phenyl amine, N-(3-methyl phenyl) N,N bis phenyl amine, N,N-bis(4-methyl phenyl) N-phenyl amine, N,N-bis(3-methyl phenyl) N-phenyl amine, tritolylamine (N,N,N-tris-(4-methylphenyl)amine), N,N-bis-(4-methylphenyl)-N-(3-methylphenyl)amine, N,N-bis-(3-methylphenyl)-N-(4-methylphenyl)amine, and N,N,N-tris-(3-methylphenyl)amine. The solubility of these molecules was estimated using ideal solution theory, the Hildebrand equation, and UNIQUAC method. The ideal solution theory and the Hildebrand equation were not able to estimate solubility with high precision. However, UNIQUAC method was able to estimate the solubility with good accuracy. It was found that substitution of methyl group regardless of its number in aryl ring increases the solubility. In addition, meta-substitution always results in higher solubility regardless of the nature of the solvent. Physical properties, as well as electrochemical properties of these materials were also provided. Based on these data, the most promising candidates for device preparation should be: mTTA, TTA, mmmTTA, and mono-TPA. However, the only way to prove the above ranking would be to test the candidates in actual devices, which is outside the scope of this paper.     

Carbon nanofibers: Synthesis, characterization, and electrochemical properties

Carbon nanofibers (CNFs) have been synthesized by co-catalyst deoxidization process by a reaction between C₂H₅OC₂H₅, Zn and Fe powder at 650 °C for 10 h. These nanofibers exhibit diameters of ∼80 nm and lengths ranging from several micrometers to tens of micrometers. X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy indicate that as-prepared CNFs possess low graphitic crystallinity. The resultant CNFs as electrode shows capacity of ∼220 mAh/g and high reversibility with little hysteresis in the insertion/deintercalation reactions of lithium-ion. In addition, the possible growth of CNFs is discussed.     

In situ EPR spectroelectrochemistry of single-walled carbon nanotubes and C60 fullerene peapods

The first in situ electron paramagnetic resonance (EPR) spectroelectrochemical study of C₆₀ fullerene peapods (C₆₀@SWCNT) as well as that of single-walled carbon nanotubes (SWCNTs) in different electrolyte solutions describes the formation of spin states by charge transfer reactions. Electrochemical reduction of peapods at high negative potentials causes the production of spins at the SWCNT site, while the intratubular fullerene is unchanged.Slightly anisotropic EPR signals were detected during electrochemical reduction of single-walled carbon nanotubes and fullerene peapods in the potential region from −1.75 to −2.15 V vs. decamethylferrocene/decamethylferrocinium couple. They are centered at g = 2.0038 and exhibit a hyperfine structure indicating the presence of functional groups containing N, O, H atoms in neighborhood. They differ from the EPR signals of chemically (potassium) doped SWCNT and C₆₀@SWCNT. As the EPR signal is influenced by the electrolyte counter ions a reaction with electrolysis products of tetraalkylammonium cations is taken into consideration. No EPR lines of fullerene anions were found in electrochemically treated peapods, but these anions are detectable, if a free C₆₀ in solution is cathodically reduced on a SWCNT electrode.     

Preparation of porous carbons from thermoplastic precursors and their performance for electric double layer capacitors

Porous carbons with high surface area were successfully prepared from thermoplastic precursors, such as poly(vinyl alcohol) (PVA), hydroxyl propyl cellulose and poly(ethylene terephthalate), by the carbonization of a mixture with MgO at 900 °C in an inert atmosphere. After carbonization the MgO was dissolved out using a diluted sulfuric acid and the carbons formed were isolated. The mixing of the PVA carbon precursor with the MgO precursors (reagent grade MgO, magnesium acetate or citrate) was done either in powder form or in an aqueous solution. The BET surface area of the carbons obtained via solution mixing could reach a very high value, such as 2000 m²/g, without any activation process. The pore structure of the resultant carbons was found to depend strongly on the mixing method; the carbons prepared via solution mixing were rich in mesopores, but those produced via powder mixing were rich in micropores. The size of mesopores was found to be almost the same as that of the MgO particles, suggesting a way of controlling the mesopore size in the resultant carbons. Measurement of capacitance was carried out in 1 mol/L H₂SO₄ electrolyte. The porous carbon with a BET surface area of 1900 m²/g prepared at 900 °C through solution mixing of Mg acetate with PVA showed a fairly high EDLC capacitance, about 250 F/g with a current density of 20 mA/g and 210 F/g with 1000 mA/g. The rate performance was closely related to the mesoporous surface area.     

Carbon aerogel spheres prepared via alcohol supercritical drying

We have developed a method that would allow for the fabrication of carbon aerogel (CA) spheres. The inverse phase suspension polymerization of resorcinol and formaldehyde monomers with Na₂CO₃ as a catalyst followed by supercritical drying was explored. The effects of the chemical formulation and processing procedures and the conditions of the structures of organic and related carbon aerogels were studied. The experimental results indicated that it was easy to avoid the accumulation of polymerization heat during gelation, and easy to take out the products from the reaction container, through this fabrication method. Sol-gel microspheres with diameters ranging from about 30-1000μm could be obtained. After drying the sol-gel spheres under alcohol supercritical drying conditions, aerogel spheres with a bulk density of 0.8-1.0 g/cm³were prepared, and by subsequently pyrolyzing them, CA spheres with surface areas of 250-650 m²/g were obtained. The resultant CA spheres could be used as the electrode materials of supercapacitors. The specific capacitance of the CA spheres was as high as 215 F/g, and the equivalent series resistance at 48 Hz was about 1 Ω.     

Electro-chemical chloride extraction: Influence of C3A of the cement on treatment efficiency

The aim of this study was to clarify whether the C₃A content of cement had a significant effect on electrochemical chloride extraction (ECE) treatment efficiency. It is known that a higher C₃A content in a cement gives it superior chloride complexing ability resulting in the formation of an “insoluble” calcium chloro aluminate compound.ECE was applied using cylindrical specimens made from concrete containing two levels of C₃A (4.3% and 9.05%). Specimens were 5 cm in diameter and 10 cm in height. Steel was placed in the axial direction with an embedded length of 7 cm. These specimens were immersed in an NaCl solution and dried in a stream of air at 40 °C for 10 months. The corrosion was monitored by half-cell potential and polarization resistance measurements. After steel depassivation, ECE was applied for 20, 30, 40 and 50 days using a constant current density of 1 A/m² of steel. At the end of the treatment, the specimens were maintained at 20 °C and 70% RH in order to observe the evolution of the steel (electrochemical measurements).The results show that, after 30 days of treatment, the chloride content remained constant in the specimen. This was probably due to OH⁻ ion formation on the steel. The OH⁻ ions “contribute” to the current transport, decreasing the ECE efficiency. Concerning the C₃A content, ECE efficiency was slightly affected by C₃A because only a part of the bound chloride ions was released. From the point of view of corrosion, half-cell potential showed a shift in the positive direction, indicating little corrosion activity at 20 °C and 70% RH. However, polarization resistance measurements showed that 2 months post treatment corrosion rates were significant, although the corrosion rate decreased from 6 μA/cm² to 2.5 μA/cm².