Thermophysical properties data on molten semiconductors

Thermophysical properties of molten semiconductors are reviewed. Published data for viscosity, thermal conductivity, surface tension, and other properties are presented. Several measurement methods often used for molten semiconductors are described. Recommended values of thermophysical properties are tabulated for Si, Ge, GaAs, InP, InSb, GaSb, and other compounds. This review shows that further measurements of thermophysical properties of GaAs and InP in the molten state are required. It is also indicated that a very limited amount of data on emissivity is available. Space experiments relating to thermophysical property measurements are described briefly.Nomenclature Density - C _p Specific heat - Kinematic viscosity - Dynamic viscosity= - Thermal diffusivity - Thermal conductivity=C_p - Volumetric thermal expansion coefficient - Surface tension - d/dT Temperature coefficient of surface tension - g Gravitational acceleration - T Temperature - T Temperature difference - L Characteristic dimension     

Study of viscosity of mono-, di-, and trialkylamines

Viscosities of several mono-, di-, and trialkylamines have been measured in the temperature range 298 to 333 K. It is observed that viscosities are highly dependent on shape, size, and association through H-bond or through dipole. Following the transition state theory, energy, Gibbs free energy, and entropy of activation of viscous flow have been calculated. The values of expansion energy for these liquids have also been calculated using free volume theory, and subsequently amines have been classified as volume-restrained or energy-restrained liquids. The group contribution method of Van Velzen, Cardozo, and Langenkamp for estimating viscosity has been examined with the present and literature data, and the new group contribution increments N _i and B _i for amines have been evaluated.     

THE APPARENT VISCOSITY OF SEMI-SOLID AZ91D ALLOY AT STEADY STATE

The rheological behavior of semi-solid AZ91D at steady state is studied using a Couette type viscometer in the present paper. The results show that the apparent viscosity of semi-solid AZ91D at the steady state increases with the solid fraction increasing, and goes up sharply when the solid fraction reaches a certain value, which is called critical fraction. In addition, the apparent viscosity of semi-solid AZ91D at the steady state takes on a distinct downtrend with the shearing rate increasing, which indicates a strong shear thinning property. In addition, the critical solid fraction becomes higher under larger shearing rate, owing to the more globular shape of the solid particles. Based on the present experiment results, an empirical equation is built as that, relating the steady state apparent viscosity of semi-solid AZ91D with the solid fraction fs andshearing rate (?) at the same time: ηapp=10.74exp(6.95fs)(?)-0.86.     

One-step fabrication superhydrophobic sand filter for capillary-driven separation of water-in-oil emulsions

The efficient separation of water-in-oil emulsion is of significance in environment and energy filed, and it has become a world-wide challenge. Herein, we have presented a one-step, facile and low-cost approach to prepare superhydrophobic sands for efficient separation of water-in-oil emulsion. The as-prepared sand layers possessed a water contact angle higher than 151°, demonstrating their superior superhydrophobic property. Besides, the as-prepared sand layers could separate water-in-emulsions with separation efficiency up to 99.7%, which is superior to both traditional and superwettable filtration membranes. The effect of thickness of sand layer on separation performance was also investigated. The results showed that the filtration flux decreased with the increased of filtration thickness while the separation efficiency increased. The as-prepared sand layer proposed by this study is a processing candidate for separating water-in-oil emulsion in practical industry. Additionally,the as-prepared superhydrophobic sand fabrication method also provides an alternative for desert water storage.     

剪切速率在大型塑料注射模设计中的拓展应用

通过对聚合物熔体流变学的研究,探讨了剪切速率的变化对塑件成型的影响,以及其与塑料注射模浇口形式和尺寸的关系,并将其实际应用到汽车大型塑件注射模浇注系统的设计中,取得了较好的效果。     

K2O和Na2O对高Al2O3炉渣组元活度和MgO含量的影响

 随着高品位铁矿石消耗的加快,资源逐渐趋于贫化,钢铁企业可利用的铁矿石原料逐渐向中低品位原料转变,尤其是高铝铁矿,这类原料的使用无疑会增加高炉渣中Al₂O₃质量分数,影响高炉现有的操作制度。Al₂O₃质量分数为15%～17%的高炉渣,由于Al₂O₃含量高而使高炉渣的冶金性能变差,为了保证高炉渣的冶金性能,必须在其中添加8%左右的MgO。然而,Al₂O₃含量相似的浦项钢铁的高炉渣,其MgO质量分数仅为4%左右,高炉实现了高效、稳定、顺行。因此,从高炉CaO-SiO₂-Al₂O₃-MgO四元渣系的物理化学机理出发,研究了K₂O、Na₂O对高炉渣四元渣系CaO-SiO₂-Al₂O₃-MgO中各组元活度的影响;研究了“渣-气”平衡条件下渣中碱金属氧化物和气体中碱金属的关系;计算了K₂O、Na₂O和MgO对黏度的影响。结果显示,在考虑高炉渣CaO-SiO₂-Al₂O₃-MgO中各组元活度、碱金属在渣-气间的分布和炉渣黏度的情况下,当碱金属氧化物K₂O和Na₂O存在时,可以适当减小MgO含量,并可以保证高炉渣各组元活度及炉渣黏度基本不变。这不仅有助于减少高炉原料中添加含镁熔剂、提高原料品位、高效排碱、降低碱危害、减少碳排放、延长高炉寿命及降低成本,还能促进钢铁企业实现节能减排的目标。     

TEMPERATURE DEPENDENCE UPON VISCOSITY OF Ni-P ALLOY ON AMORPHOUS FORMATION

The viscous flow of amorphous alloys near T_gis closely related to the viscosity of liquid alloys.On the basis of the measured surface tension and density for Ni-P binary alloys,the correla-tion between the viscosity of the melt and viscous flow process of the amorphous alloy is inves-tigated.The relationship between viscosity and temperature for Ni-P alloys going from liquidto amorphous solid may be described by the following formula:     

Ce对过共晶Al—Si合金熔体粘滞性和结构的影响

研究了Ce对Al—16％Si合金熔体粘滞性的影响。结果表明：Ce的加入增加了合金熔体的粘度，且随着Ce含量的增加粘度值也增加。结合加入Ce的Al—16％Si合金氢含量的变化、凝固组织和DSC曲线研究了熔体结构的变化，分析了粘度与液态结构变化之间的关系。     

高密度钨合金热静液挤压流动粘度的数值计算

采用粘性流体的运动微分方程分析工作介质在锥模中的挤压流动，通过分析工作介质的粘度对热静液挤压的影响，指出了合理的选择工作介质的成分使得粘度适宜，可以使热静液挤压力最小，而且能够避免挤压件缺陷的产生。挤压介质的粘度是关系到坯料变形流动的润滑性能及挤压变形流动性能的关键。在此基础上，给出了挤压介质的粘度的数学关系式，为热静液挤压工艺奠定重要的理论基础。     

紫外光快速固化的树枝状丙烯酸酯齐聚物的制备和性能

通过乙二胺(EDA)和三羟甲基丙烷三丙烯酸酯(TMPTA)，以甲醇为催化剂，在30℃进行6小时Michael加成反应，可制得含多个双键的树枝状丙烯酸酯齐聚物(DAO)．与相似分子量的线性丙烯酸酯齐聚物相比，DAO粘度低，用作紫外光固化树脂，其固化速度快，且固化产物硬度好，耐溶剂性好．