Electrical characterization of porous BaTiO3 using impedance spectroscopy in humid condition

The humidity response characteristics of La doped BaTiO₃ with different sintered densities and room temperature electrical conductivities were investigated using complex impedance measurement. The samples with low density and high resistivity showed the large and nearly linear sensitivity to the change of humidity. The impedance spectra of samples, when exposed to high humidity, can exhibit microstructure-related features, even though they do not give rise to a noticeable characteristic change when exposed to low humidity. The observed impedance patterns were dependent upon the density, and hence the oxidation kinetics of BaTiO₃.     

Evolution of the capillary network in a reactive powder concrete during hydration process

Ultrasonic waves in echographic mode, combined with autogenous shrinkage measurements, were used to study the evolution of the capillary network of reactive powder concrete (RPC) from the time after the mixing. Two characteristic porous classes have been identified: the first, between 10 and 20 nm, begins when the material reaches its solid hyperstatic state, and the second about 1 or 2 nm. The first class is associated with the porous space between the C-S-H hydrate clusters and the second with the internal porosity of the hydrate. The evolution of the active capillary radius as a function of the degree of hydration allows us to understand the strong interaction between the capillary network size and the chemical activity given by the dissipated calorimetric power curve. Indeed, the maximum point of the chemical activity marks the transition of the first class of pores to the second one. Finally, measurements of electrical conductivity through RPC samples show that after the maximum of the dissipated power, the curve of this electrical conductivity presents the same evolution as the capillary radius. As the electrical conductivity clearly depends on the evolution of the capillary network, the similarity between the results confirms our analysis in pore classes.     

含氟聚酰亚胺的辐射交联及其交联度的XPS表征

含氟聚酰亚胺(FPI)是一种耐高温、耐水解的新型聚酰亚胺。到目前为止,尚未见文献报道它的辐射交联。本文发现它能在高温辐射下交联,交联后的含氟聚酰亚胺的玻璃化转变温度以及高温力学性能有明显提高。本文还首次用XPS方法做了它的交联度表征。用XPS方法求得FPI的凝胶化剂量为50Mrad。     

Dynamics of hydrated iron(II) cations in nafion polymer membranes

Mössbauer studies of Fe²⁺ in water-soaked nafion polymer membranes in the temperature range between 90 K and 250 K have been performed. Above a critical temperature (～ 180 K) the spectra exhibit both elastic narrow absorption lines and quasielastic broad lines. These spectra are typical of bounded diffusion phenomena observed by Mössbauer spectroscopy in macromolecular systems like haemoglobin, myoglobin and ferritin. Similar spectral shapes have been observed by quasielastic neutron scattering from water in nafion membranes. Within 50 K above the critical temperature the total Mössbauer absorption area decreases by an order of magnitude whereas the narrow absorption line decreases by two orders of magnitude. The results are interpreted in terms of bounded diffusive motion of the iron. Using a model based on overdamped harmonically bound Brownian motion, the essential parameters of the iron motion can be derived as a function of temperature. The iron motion most probably reflects the motion of a large Fe²⁺ complex, e.g. Fe(H₂O)²⁺₆, which is attached to the polymer side chains via the sulphonic group.     

Development of nano indium tin oxide (ITO) grains by alkaline hydrolysis of In(III) and Sn(IV) salts

Indium tin oxide (ITO) nano powders of different compositions (In: Sn = 90: 10, 70: 30 and 50: 50) were prepared by heat treatment (300-450°C) of mixed hydroxides of In(III) and Sn(IV). The hydroxides were obtained by the reaction of aq. NH₃ with mixed aq. solutions of In(NO₃)₃ and SnCl₄. FTIR and TG/DTA studies revealed that powders existed as In(OH)₃H₂O—SnO₃H₂H₂O in the solid state and then they transformed to In₂O₃—SnO₂ via some metastable intermediates after 300°C. Cubic phase of In₂O₃ was identified by XRD for the oxides up to 30% of Sn. Particle size measurements of the solid dispersed in acetone and SEM study for microstructure showed that the oxides were in the nano range (55-75 nm) whereas the size range determined from Debye-Scherrer equation were 11–24 nm.     

Origin of visible photoluminescence from porous silicon as studied by Raman spectroscopy

In this paper we discuss the different models proposed to explain the visible luminescence in porous silicon (PS). We review our recent photoluminescence and Raman studies on PS as a function of different preparation conditions and isochronal thermal annealing. Our results can be explained by a hybrid model which incorporates both nanostructures for quantum confinement and silicon complexes (such as SiH _x and siloxene) and defects at Si/SiO₂ interfaces as luminescent centres.     

Nd：MgO：LiNbO3晶体的荧光光谱及其双晶体腔内互倍频实验

采用激光感生荧光技术测量了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３晶体的偏振荧光光谱，简要地说明了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３双晶体腔内互倍频的基本原理，并在实验中用染料激光作泵浦源实现了其双晶体腔内互倍频运转；得到５４３ｎｍ横模倍频绿光单端输出约ＹＭＷ，腔前泵浦阈值约３８ＭＷ，总转换效率约为１．３％。     

短波长相干光与原子团受激发射

多种原子团及其离子已具有在VUV/XUV波段产生受激发射的能力。本文介绍了产生短波长相干辐射的方法、研究现状、研究方法和原子团的结构与受激发射。     

Charge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates

Electrochemical impedance spectroscopy was used to determine the effective charge transfer resistances of porous dye-sensitized solar cell counter electrodes prepared by low-temperature spray deposition and compression of conductive carbon and platinized Sb-doped SnO₂ powders on indium tin oxide-coated plastic substrates. The charge transfer resistances were 0.5–2 and 8–13 Ω cm², respectively, when using 3-methoxypropionitrile as the electrolyte solvent. The manufacturing method used lends itself to produce mechanically stable and even-quality electrodes in an easy and fast manner.     

Investigation of Ni/4H-SiC diodes as radiation detectors with low doped n-type 4H-SiC epilayers

The development of SiC minimum ionising particle (MIP) detectors imposes severe constrains in the electronic quality and the thickness of the material due to the relatively high value of the energy required to produce an electron–hole pair in this material by MIP against the value for Si. In this work, particle detectors were made using semiconductor epitaxial undoped n-type 4H-SiC as the detection medium. The thickness of the epilayer is on the order of 40 μm and the detectors are realised by the formation of a nickel silicide on the silicon surface of the epitaxial layer (Schottky contact) and of the ohmic contact on the back side of 4H-SiC substrate. The low doping concentration (6×10¹³ cm⁻³) of the epilayer allows the detector to be totally depleted at relatively low reverse voltages (100 V). We present experimental data on the charge collection properties by using 5.486 MeV -particles impinging on the Schottky contact. A 100% charge collection efficiency (CCE) is demonstrated for reverse voltages higher than the one needed to have a depletion region equal to the -particle extrapolated range in SiC. The diffusion contribution of the minority change carriers to CCE is pointed out. By comparing measured CCE values to the outcomes of drift–diffusion simulation, values are inferred for the hole lifetime within the neutral region of the charge carrier generation layer.