Fluorescent polyacrylate derivate from 4-biphenylmethanol with UV-green emission

In this paper we report the synthesis of a new polyacrylate named poly(1,1?-BP4MA) which is a derivate from 4-biphenylmethanol monomer. Poly(1,1?-BP4MA) was obtained by solution and bulk polymerization techniques to yield polymers with high molecular weight and high solubility. The study of the optical properties showed that poly(1,1?-BP4MA) is a fluorescent material with emission in the UV-green region and it has similar quantum yield to tryptophan.     

Fluorescent carbon quantum dots-based prodrug nanosponges with outstanding tumor-specific drug delivery and imaging

Carbon quantum dots (CQD)-based nanosponges have been widely designed for tumor theranostic application recently. However, the drug content is usually lower with the shorter dynamic covalent linkers while the longer hydrophilic dynamic covalent linkers led to a significant premature drug leakage. Here, a hydrophobic linear reducible-responsive linker with two terminal aldehyde group was designed to crosslink the hydrazine-functionalized PEGylated CQDs (Hy-CQD-PEG), resulting in Hy-CQDss-PEG nanosponges. After doxorubicin (DOX) conjugation, the DOX-Hy-CQDss-PEG prodrug nanosponges were obtained with DOX content of 18.76 % and hydrodynamic diameter of 140 nm, respectively. The DOX-Hy-CQDss-PEG nanosponges were stable in the normal physiological medium with very low drug leakage and fluorescence, while they could disintegrate in the tumor intracellular microenvironment, releasing DOX and the hydrazine-functionalized CQDs for theranostic application.     

A modified lateral flow immunoassay for the detection of trace aflatoxin M1 based on immunomagnetic nanobeads with different antibody concentrations

A modified lateral flow immunoassay (two-step assay) was developed to detect trace aflatoxin M1 (AFM1) in raw milk. In contrast to conventional LFIA, two kinds of immunomagnetic nanobeads (IMNBs) were used. One IMNB with high antibody concentration was used to capture AFM1 in the test sample, whereas the other IMNB with low antibody concentration was used to elucidate the results of the test. Critical factors, such as antibody concentration of IMNBs and size of IMNBs, were investigated. The two-step assay exhibited an ideal sensitivity to screen trace AFM1 in milk samples without extra sample pretreatment. The cutoff value of the naked eye was 0.02 μg/L and satisfied the European Union's maximum limit of AFM1 in raw milk, heat-treated milk, and milk used to manufacture milk-based products and even in baby foods. With the same antibody, sensitivity was enhanced approximately 25 and 50 times when compared with conventional IMNB-based LFIA and gold-based LFIA, respectively. Corresponding results of 13 raw milk samples were obtained between this two-step assay and referenced enzyme-linked immunosorbent assay.     

Highly sensitive toxin microarray assay for aflatoxin B1 detection in cereals

We report a rapid, highly sensitive microarray method for quantitative aflatoxin B₁ (AFB₁) detection in cereal samples. Following optimisation using an indirect competitive immunoassay, optimised amounts of AFB₁-bovine serum albumin (AFB₁-BSA)-conjugate were contact-printed onto 16 isolated sub-arrays on multi-pad nitrocellulose coated slides subsequently used in competitive binding assays.The toxin microarray working range for AFB₁ was established in the range of 15 pg g⁻¹ to 3.04 ng g⁻¹, with a detection limit of 1 pg g⁻¹. To determine assay sensitivity in contaminated food models, wheat flour and barley grains samples were spiked with AFB₁ standard dilutions. Following extraction, the working ranges of 0.11–4.15 and 0.18–4.31 ng g⁻¹ were determined, with detection limits of 30 and 90 pg g⁻¹, respectively. The sensitivity of the developed assay is below the European commission limit set for AFB₁ detection and the assay procedure was completed in 3 h time. Good recoveries (98% ± 11%) obtained demonstrate the suitability of the proposed method for rapid and sensitive quantification of AFB₁ in contaminated cereal samples.     

Maleimide–based donor-π-acceptor-π-donor derivative for efficient organic light-emitting diodes

Herein, we report a highly fluorescent material 3,4-bis(4′-(9H-carbazol-9-yl)-[1,1′-biphenyl]-4-yl)-1-hexyl-1H-pyrrole-2,5-dione (Cbz-MI) based on donor-π-acceptor-π-donor (D-π-A-π-D) backbone. We explored maleimide as an acceptor, phenyl as π-conjugated spacer and carbazole as donor. Photophysical properties revealed high photoluminescence quantum yield of 0.84 and 0.72 in solution and doped matrix, respectively. An encouraging external quantum efficiency of 2.5% with emission peak at 550 nm is achieved utilizing Cbz-MI as emitting layer in doped electroluminescent device structure.     

Oil palm bunch ripeness classification using fluorescence technique

Oil palm is Malaysia’s major agriculture product and it covers approximately 5 million hectares of Malaysia’s land. Limited land resources have been an important factor that motivated the need to increase oil extraction rate (OER). OER of oil palm fresh fruit bunches (FFB) depends highly on their maturity stage. The ripe oil palm FFB will produce high OER while the under ripe and over ripe oil palm FFB will produce less oil. Thus, this paper presents a method of classification between oil palm FFB into ripe, under-ripe and over-ripe categories. This research was done at an oil palm plantation in peninsular Malaysia. A total of two-hundred and ten oil palm FFB that consist of seventy bunches for each category of under-ripe, ripe and over-ripe had been used. Each bunch was scanned ten times randomly with a hand-held multi-parameter fluorescence sensor called Multiplex®3. The parameter measured was the Blue-to-Red Fluorescence Ratio (BRR_FRF) obtained from blue-green (447 nm) and far-red (685 nm) emission signal by using ultraviolet (UV) light emitting diode as excitation light source. The novel contribution of this research is to prove that the oil palm FFB maturity can be determined using the Blue-to-Red Fluorescence ratio index. This is based to our finding of a significant difference among the three categories of ripeness based on the parameter. Classification and Regression Tree (C&RT) method was proposed in this paper. Hundred-fifty samples were used to develop the model by trained it using C&RT method and the remaining sixty samples for the test component. By using the C&RT method, the results show the best accuracy of overall testing classification is 90%. This research will be useful for future development of non-destructive, automatic and real time oil palm FFB grading system.     

New 2,2-difluoro-1,3,2(2H)oxazaborines and merocyanines derived from them

Synthetic methods have been developed to prepare oxazaborines, the azaanalogues of 2,2-difluoro-1,3,2(2H)dioxaborines, which can form merocyanine dyes. The first oxazaborine merocyanines with the isomeric position of the coordinating nitrogen atom have also been obtained. Comparing the spectral properties of donor-acceptor dioxa- and oxazaborine dyes, it is seen that substitution of the 3-O atom by the NH group in the chelate ring has a slight effect on absorption and fluorescence band positions but causes the intensity redistribution between the 0-0 and 0-1 vibronic absorption peaks and thus induces a change in the absorption band shape due to the enhanced solvation of oxazaborines. Substitution of the 1-O ring atom by the NPh group leads to a bathochromic shift and a manifold increase in the fluorescence quantum yield for the corresponding boron chelate dyes.     

Molecular packing correlated fluorescence in TIPS-pentacene films

The molecular packing and optical properties of exposed and buried layers (i.e. the layers at the top surface and near the substrate, respectively) were systematically studied in 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) films coated by spin-coated (SC) and droplet-pinned-crystallization (DPC) methods. Buried layers in both films exhibit intense photoluminescence (PL) resembling the behaviors of the molecules in dilute solution ascribing to weak π-π stacking, while the exposed layers show extremely weak PL due to strong crystallinity. Polarized excitation PL spectra demonstrate that molecular orientation of the buried layers is quasi-ordered in the film coated by DPC method and completely disordered in the film coated by SC method. Besides, the strong crystallinity of the exposed TIPS-pentacene is verified by grazing incident wide-angle X-ray scattering measurement. The distinct differences in optical and structural properties between the exposed and buried layers indicate that TIPS-pentacene films are inhomogeneous in vertical direction due to interfacial effect, which affects the performance of photodiode fabricated with both films. The understanding of the molecular packing correlated fluorescence in TIPS-pentacene films is vital for optimizing the film structure to achieve high performance organic electronic devices.     

Phosphor SrZrO3:Sm3+ with fluorescence modulation and photochromic characteristics for erasable optical storage

At present, for inorganic photochromic materials, the single function limits their application level in the field of optical storage and anti-counterfeiting. Generally, the reversible modulation of photoluminescence is achieved through a photochromic process, thereby improving the ability of the photochromic material to store information. Here, we designed a Sm³⁺ doped perovskite oxide (SrZrO₃:Sm³⁺) inorganic photochromic material. Combined with its red photoluminescence and photochromic properties, it can realize dual information storage and recognition functions. The fluorescence regulation function is realized by the doping of Sm³⁺, which is conducive to the application in the direction of optical switch. The mechanism of photoluminescence and photochromism was studied. Finally, a flexible film with SrZrO₃:Sm³⁺ material was fabricated to demonstrate rewritable optical recording and storage and reading of dual optical information.