Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry     

In-chain functionalization by alternating anionic copolymerization of styrene and 1-(4-dimethylaminophenyl)-1-phenylethylene

Anionic copolymerizations of styrene (M₁) with excess 1-(4-dimethyl-aminophenyl)-1-phenylethylene (M₂) were conducted in benzene at 25°C for 24h, using sec-butyllithium as initiator. Narrow molecular weight distribution copolymers with M?;_n = 16.1 × 10³ g/mol (M?_w/M?_n = 1.04) and 38.2 × 10³g/mol (M?_w/M?_n = 1.05), and 24 and 38 moles of M₂ per macromolecule, respectively, were characterized by size exclusion chromatography, ¹H NMR spectroscopy and DSC. The monomer reactivity ratio, r₁ = 5.6, was obtained from the copolymer composition at complete consumption of M₁, assuming that the rate constant k₂₂ =0,i.e. r₂ =0. The polymers exhibited T_g values of 128 and 119°C, respectively, which correspond to an estimated T_g = 217°C for the hypothetical homopolymer of M₂.     

Composition and morphology of char particles of fly ashes from industrial burning of high-ash coals with different reactivity

A comparative investigation of the composition and the morphology of char particles was conducted: char particles were recovered from fly ashes of two power stations in Russia from burning of high- and low-reactivity high-ash coals; the known results of studies of char particles generated in laboratory conditions from coals characterized according to the ASTM D388-98a standard were also used. The composition of organic and mineral components of different fraction char particles was studied. An inverse correlation between the content of the organic substance and the iron content in char particles was identified. The morphology of the char particles for the three main types (Cenospheric, Network and Solid) and the influence of coal reactivity and temperature on char morphology were investigated. The morphology of the mineral component of char particles of the two varieties of coals was also studied. It was shown that the high-temperature of industrial burning of Ekibastuz coal results in melting of the mineral substance and forming of micron-scale microspheres located in the lamellar porous structure of the carbon matrix.     

Effect of Carbon Properties on Melting Behavior of Mold Fluxes for Continuous Casting of Steels

Mold fluxes are synthetic slags used to coverthe liquid steel meniscus during continuous castingof steel.The flux,whichis continuously fed on thesurface of liquid pool during casting,melts first andthenflowsintothe gap between mold wall and solid-ified steel shell.It is well known that the perform-ance of the flux can greatly affect both the castingoperation and product quality.Because of its i mpor-tance,intensiveinvestigations have been performed,and considerable progress has been made[1-6].…     

丙烯酸偕二硝基丙酯与苯乙烯的共聚合及共聚物性质

丙烯酸偕二硝基丙酯(DNPA)与苯乙烯(St)在乙酸乙酯溶液中自由基共聚反应得到DNPA-St共聚物,利用红外光谱法测定了共聚物的组成,从而测得了丙烯酸偕二硝基丙酯与苯乙烯的竞聚率,采用FT-IR、1H NMR、DSC等方法研究了DNPA-St共聚物的结构和热性能.研究结果表明,用Fineman-Ross方法,求得丙烯...