安塞低渗油田孔隙结构对渗流特征曲线的影响

渗流曲线的测定是认识油藏流体渗流规律的基础。实验发现安塞油田储集层岩心渗流曲线在低有效净围压下近似表现为两段直线，通过压汞实验和毛管压力曲线数据分析，认为这种特征与储集层孔隙结构有关。在分析渗流特征时应综合考虑孔隙结核特征、流体与孔隙介质的相互作用等因素。     

灞河生态治理工程模型试验研究

通过模型试验 ,对位于西安市东郊因采沙使河道破坏严重的灞河河段进行了复现试验和研究 ,并以此为依据 ,通过优化比较为设计部门提供了合理的橡胶坝坝址和坝座高程。在此基础上 ,又对建坝后橡胶坝对上下游冲淤变化的影响进行了试验研究和分析 ,解决了工程设计中的一些关键技术问题     

青海省桥头电厂河子沟灰场拦洪坝粘滞流模型试验分析

本文采用粘滞流模型试验对青海桥头电厂河子沟灰场拦洪坝设计方案进行了论证，分析了多种防渗条件下的渗流场特点，提出了满足工程运作的既经济又合理的建议。     

FLOW OF NEWTONIAN FLUIDS THROUGH SINUSOID ALLY CONSTRICTED TUBES. NUMERICAL AND EXPERIMENTAL RESULTS

Numerical and experimental predictions of pressure drops in the flow of Newtonian fluids through sinusoidally constricted tubes (SCT) are carried out. The numerical evaluations analyzed in this work are obtained from the following methods: Geometric Iteration (GJM), Geometric Iteration with First and Second Upwinds (GIM1, GIM2), Successive Over Relaxation by Line (SORBLM), Global Galerkin Spectral Method (GGSM), Collocation (CM) and Dufort-Frankel (DFM). The GIM1, GIM2 and SORBLM are applied to SCT and explained in this work. The other methods have been previously reported in the literature with the same purpose. Experiments are accomplished for constrictions of approximately 40,60 and 80% of the average tube diameter and results compare well with numerical predictions of the steady flow. It is concluded that special attention should be given to evaluations of the friction factor ƒ for Reynolds numbers Re between the onsets of flow separation and turbulence due to flow instability. Finally, the SCT as a model for porous media (PM) is discussed.     

测量不确定度计算与实验方案的恰当选择

文章介绍了不确定度的定义及其一般计算公式，通过具体实例介绍了实验后不确定度的计算和实验前的误差估计。并对有多种可能的实验方案，利用误差估计的方法，选择出最佳的实验方案，使其不确定度最小。     

腐蚀算法在重建一类特殊管道中的应用

针对一类特殊而不能直接对其观察的管道（如动物的血管），为了准确了解其内部特征和形态，借助计算机给出了一种用腐蚀算法来重建管道原形的方法。这种方法简单易行，而且精确度高。     

定容气田开发规划概算法

基于物质平衡方程、产能方程和递减方程的结合,提出了定容气田开发规划的概算法.该法可用于预测地层压力、井底流动压力、井口流动压力和稳产年限.实际应用表明,本文提供的方法是实用有效的.     

Electron acceleration by single and double laser beams

The longitudinal electric field of single and double Gaussian laser beams are used to accelerate electrons. The longitudinal field of the single beam is concentrated on the axis and is favourable for acceleration. A set of two beams is considered. Beams run parallel, collinearly, overlap partially and have a phase difference iπ in between. As a result, the transverse components of fields cancel each other while the longitudinal components are double-fold. In both schemes, the electrons are accelerated in lengths of the Rayleigh range, which is common to the plasma-based accelerators.     

FED制作工艺研究

本文介绍了我们开发的ＦＥＤ工艺，包括；硅锥场致发射阵列的制作，栅极制作，阳极支柱的制作和平板透明真空封装，对工艺中的难点及对策作了详细描述。利用上述工艺，已经制成了平板数码管，其栅阴特性理想，阳阴之间也能测得明显的场致发射特性产伴有荧光激发。     

焦化防砂室内实验研究

油井防砂工艺技术的研究与发展对疏松砂岩油藏的正常开采至关重要.焦化防砂是通过向地层内注入热空气使原油在高温下发生氧化裂解生成焦炭从而将地层砂固结的一种防砂新技术.为了对该项技术进行全面系统的理论分析与评价,设计并制作了一套焦化防砂实验装置,利用该装置进行了焦化防砂室内实验研究.焦化效果以岩样的抗压强度进行评价,实验结果表明,影响焦化后岩样抗压强度的主要因素为空气最高温度、处理时间和空气流量.此外,对焦化处理后的岩样所作的岩样组成分析揭示出,稠油胶结机理为氧化作用使部分油分和胶质变成沥青质,沥青质受到高度的缩合作用而成为高分子量的甲苯不溶物.由于新生胶质的氧化比原生胶质的氧化困难得多,因此适合焦化防砂的油层,其原油必须含有一定量的原生胶质和沥青质.