醋酸乙烯酯对丙烯酰胺聚合反应的影响

探讨了醋酸乙烯酯在丙烯酰胺聚合反应中的影响。实验证明在丙烯酰胺水溶液混入少量醋酸乙烯酯 ,该水溶液经阳离子交换树脂处理后 ,可聚合生成交联型丙烯酰胺胶体。     

γ 射线引发 VAc 乳液聚合以制备白乳胶的动力学及工艺条件研究

研究了ＶＡｃ的辐射乳液聚合动力学，并对其聚合工艺条件作了初步探索。得出ＶＡｃ乳液在进行辐射聚合时，成核期结束较早（转化率在１０％以下），有相当长的恒速期存在。乳胶粒子直径在０．５～３μｍ之间，比一般的乳液聚合乳胶粒子要大。同时从动力学数据还可以看出几种成核机理（胶束成核，水相成核和液滴成核）同时存在，由此对试验条件提出了相应的要求。     

Synthesis and characterization of aromatic polyisoimides derived from PMDA and para-diamines. An approach to in situ generated rigid-rod molecular composites

A new concept for the processing and fabrication of rigid-rod molecular composites aiming at the elimination or minimization of phase separation is proposed. This approach calls for a coil-like aromatic polyisoimide which is soluble and compatible with an amorphous matrix polymer or thermosettable oligomer and can undergo facile transformation to the corresponding rigid-rod polyimide in solid composite state, thus imparting the inherently high strength/high modulus properties to the final form. To this end, various synthetic routes were explored to obtain para-diamines which could afford high molecular weight and aprotic-solvent-soluble polyisoimides upon polymerization with pyromellitic dianhydride (PMDA). Four such polyisoimides were prepared, with their inherent viscosities ranging from 0.25 to 1.89 dl g⁻¹ in dimethylacetamide at 30°C. Facile thermally induced isoimide-imide conversion was demonstrated by solid-state (film) Fourier transform infrared spectroscopy. A preliminary evaluation of the compatibility of the polyisoimide/matrix resin was made. In one instance, a film prepared from the polyisoimide derived from PMDA and 3,3′,5,5′-tetramethylbenzidine (TMB) showed no visually detectable phase separation.     

聚丙烯固相法接枝改性

聚丙烯固相法接枝不饱和单体是一种简便易行的本体法技术。与其它接枝方法相比，具有成本低、接枝率高、时间短、无溶剂回收、不妨害接枝物的进一步应用等优点。本文介绍了聚丙烯固相法接枝不饱和单体的进展，并较详细地讨论了影响接枝反应的各种因素。     

Solvent and oxygen effects on the free radical polymerization of 6-O-vinyladipoyl-d-glucopyranose

The vinyl ester-type glycomonomer 6-O-vinyladipoyl-d-glucopyranose was polymerized in water and alcohol solutions. In all cases, long polymerization times were necessary to achieve reasonable conversions. Depending on the nature of the solvent, polydisperse glycopolymers were obtained possessing a molecular weight ranging between 10,000 and 122,000 Da (PS equivalent). Higher alcohols appeared to act as chain transfer agents and oligomers with DP_n between 2 and 6 were indeed obtained when 2-propanol was the solvent. Also, thorough oxygen removal from the reaction mixture proved to be essential for the success of the experiment, plain nitrogen sparging being ineffective in most cases.     

芯壳乳液胶粘剂的研究

介绍乙酸乙烯酯－丙烯酸丁酯－丙烯酸芯结构乳液的制备方法，并将它们的性能与均匀共聚乳液作了测试与比较。     

The Polymerization of Metal-Containing Vinylic Monomers of Iron and Tungsten with Metal–Carbon σ Bonds

A series of metal-containing vinylic monomers of the type and was homopolymerized using 2,2-azobisisobutyronitrile (AIBN) as the free-radical initiator. These monomers were also copolymerized with styrene in the presence of AIBN. These compounds represent a class of organometallic polymers in which the metal is bonded to the polymer backbone via a metal–carbon bond. The new compounds were characterized by IR and ¹H NMR spectroscopy as well as scanning electron microscopy, gel permeation chromatography, and thermoanalytical studies (DSC and TGA). The properties of the new organometallic polymers are discussed.     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

VCM／VAC共聚掺混树脂的合成及性能研究

本文介绍用特殊悬浮法合成共聚掺混树脂的方法,并讨论了粒经、掺混树脂含量等因素对糊性能的影响.结果表明,通过使用多元混合引发剂和悬浮剂及加入适量的助分散剂、界面活性剂、调粒剂等,并通过控制搅拌速率、温度等工艺条件能有效地控制粒子的粒径、粒度分布及粒子形状,从而制得具有良好性能和粒度均匀的掺混树脂;在一定的粒径范围内(25～40μm),掺混树脂的平均粒径越大,对降低糊粘度的效果越好;增加掺混树脂的含量对降低初始糊粘度更为有利,在PVC糊树脂中加入一定量的掺混树脂可降低塑化温度,缩短塑化时间,从而改善了PVC糊树脂的加工性能.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.