川东北气区高含硫天然气开发SWOT分析

利用SWOT态势分析方法,对四川盆地川东北气区高含硫天然气开发所拥有的资源、发展环境等优势和勘探开发、工艺技术等方面的劣势进行分析,指出当前川东北高含硫天然气开发的条件、机遇和不足,并从政治法律、经济、社会文化和技术等外部环境以及天然气经营潜在进入者和竞争对手等外部威胁分析其对本企业的影响和不利,在此基础上提出了加快川东北高含硫天然气开发的建议。     

基于MC/SG的双机热备系统设计与实现

详细介绍服务器双机技术,分析双机热备技术的主要功能,并根据企业系统的需求,提出双机设计方案,并对系统中双机热备实现细节进行相应的阐述。     

Regarding the influence of the Van der Hoven spectrum on wind energy applications in the meteorological mesoscale and microscale

We demonstrate the use of high frequency data (HFD) to reproduce the power spectrum shown by Van der Hoven in 1957. His work represents the basis of wind energy standards such as averaging and variability in the frequency domain. Our results unveil discrepancies with Van der Hoven's approach, which can be related to constraints in the computing capabilities in the 1950's. We show a major eddy-energy peak at a period of 2 days and a smaller eddy-energy peak contribution at frequencies higher than the region known as the spectrum gap. The variance calculated by the area under the curve indicated that the spectral energy is mainly due to the Power Spectral Density (PSD) values located in the microscale region. We calculated the economic value of this energy based on the turbulence kinetic energy of the wind data set. We also conclude that, given the results of the present study, HFD analysis in the frequency domain uncover eddy energy peaks that determine energy fluctuations in the short and long terms. This information is lost every time data are erased from current monitoring systems.     

KM496GB型柴油机机油压力低的原因分析及对策

通过对KM496GB柴油机机油压力低的试验分析表明,引起故障主要原因有:机油泵故障,限压阀未备紧,机油泵油量偏低,并介绍了所采取的相应措施。     

管芯式散热器传热与阻力特性试验研究

鉴于目前汽车管芯式散热器的研究较少,根据JB2293—78试验方法对其进行了传热与阻力试验研究。利用多参数优化拟合计算得出本次试验雷诺数范围内的管芯式散热器试件空气侧对流换热系数和阻力系数的准则关系式。试验结果表明：准则关系式关联精度较好;水管排数对该类型散热器试件换热性能和空气阻力具有较大的影响,四排管时散热器的换热性能最好。     

Diagnostic considerations for optical laser-extinction measurements of soot in high-pressure transient combustion environments

Laser-extinction diagnostics can provide spatially and temporally resolved measurements of attenuation from combustion-generated soot within the path of the beam. When laser-extinction techniques are utilized in high-pressure combustion environments, however, a number of complications may be encountered that are not present in low-pressure environments. Several of these experimental difficulties were investigated in diesel engine environments, and solutions that facilitated acquisition of reliable laser-extinction data were demonstrated. Beam steering due to refractive index gradients within the combusting gases was observed, and a full-angle beam divergence of over 100 mrad was measured. A spatial-filtering scheme was employed to reduce the collection of forward-scattered light and background combustion luminosity while ensuring full collection of the steered beam. To further reject combustion luminosity, a narrow-bandpass laser-line filter was employed, after diffusing the transmitted light sufficiently to avoid the effects of significant spatial non-uniformities of the filter. As the windows were subjected to thermal and mechanical stresses, dynamic etaloning effects due to the photoelastic properties of synthetic fused silica were observed. Dynamic changes in the polarization of the exit beam were also observed, as stress-induced birefringence in the windows caused dynamic phase retardation of the transmitted beam. Although these photoelastic effects could not be eliminated, they were mitigated by introducing curvature to the wavefronts in the laser-extinction beam and using polarization-insensitive elements in the detection optics. Soot deposits on window surfaces were removed ablatively using a coaxial, high-energy, pulsed Nd:YAG laser beam.     

System integration of high voltage electrostatic MEMS actuators

A system integration for High Voltage (HV) electrostatic MicroElectroMechanical Systems (MEMS) actuators is introduced on a micro-Printed Circuit Board. The system includes a programmable microcontroller, a programmable DC/DC converter, a multi output HV interface and electrostatic MEMS actuators. The system produces high output voltages (10–300 V) and can control a large variety of MEMS capacitive loads (1 to 50 pF) by combining diverse semiconductor technologies. This system proves that technologies, such as low voltage CMOS of different processes, high voltage DMOS and MEMS, can interact, communicate and even be integrated as a System In Package (SIP), providing significant size and cost reductions. The system was programmed to control electrostatic MEMS actuator. The DC/DC converter was made from components of different technologies and two addressable high voltage CMOS interfaces were fabricated with DALSA's 0.8 μm High Voltage process. A prototype of the global system has been built and tested.     

高温下 CuCr 触头材料对真空小间隙击穿强度的影响

测量了含不同合金元素的ＣｕＣｒ真空触头材料不同温度下的击穿强度,讨论了合金元素Ｗ、Ｃｏ及温度对ＣｕＣｒ真空触头材料高温下小间隙击穿性能的影响。     

大容量软盘驱动器定位系统的研究

本文分析了开发大容量软盘驱动器定位系统的关键技术，给出了一种扇段伺服定位系统，对其快速高精度定位机理进行了详细探讨。     

高密度封装的发展趋势

本文描述了近年来高密度封装中出现的新技术、新结构,如载带自动键合技术(TAB)、带线四边有引线扁平封装(TQFP)和多芯片模块(MCM)结构等。论述了高密度封装的设计考虑及材料的选择。并且指出,只有低介电常数且制成薄膜的聚酰亚胺介质材料才能提高封装密度。