The Problem of Estimating the Uncertainty of the Fixed Point Temperature Due to the Presence of Impurities

The main problems in estimating the uncertainty due to the presence of impurities in the material: the absence in the documents of a unique definition of the quantity being measured – the fixed point temperature, the lack of agreed methods of realizing the fixed points and the insufficient justification of the equations used for the estimate, are analyzed. The results of a measurement of the melting point of gallium are presented, which differ in the conditions in which they were realized – with one and two liquid-solid interfaces and different solidification conditions, are presented. The reasons for the considerable difference between the values of the temperatures obtained in these experiments are discussed.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

VARIATIONS IN ALFALFA JUICE SOLUTE CONCENTRATIONS AS WATER IS EVAPORATED

Alfalfa juice was extracted from plants during the graving phases of the first and second crops. The alfalfa juice was dried and solute concentrations were measured periodically during the process using freezing point depression (FPD) as an indicator. Solute/solvent weight ratios were calculated from the freezing point depression of fresh unconcentrated 'uice extracted from both firsc and second crops. At the time of harvest, tie FPD was a function of this ratio. The first and second crops behaved distinctively different during the drying process, with the second having a larger soluce concentration and a greater FPD at a given moisture content. The appearance of preci itate during the drying process and the general1 large FPD makes this materiay a questionable product for drying vitg low temperature processes.     

Fixed point theorems on fuzzy normed linear spaces

In this paper, definitions of strongly fuzzy convergent sequence, l-fuzzy weakly convergent sequence and l-fuzzy weakly compact set are given in a fuzzy normed linear space. The concepts of fuzzy normal structure, fuzzy non-expansive mapping, uniformly convex fuzzy normed linear space are introduced and fixed point theorems for fuzzy non-expansive mappings are proved.     

点检定修在实际应用中的初步探讨

介绍点检定修在发电厂中的应用，根据十里泉发电厂设备维修的经验提出点检定修向状态检修过渡的方法。     

A new method for the determination of wax precipitation from non-diluted crude oils by fractional precipitation

Wax precipitation is one of the most important flow assurance problems. Unfortunately, experimental data are very scarce to confirm existing models for prediction of such precipitation problem. This work reports a new experimental method. Multistage fractional wax precipitation was carried out by decreasing the temperature of crude oil. No solvent dilution was used, so the effect of solvent on temperature wax precipitation was avoided. The reproducibility of the method was tested with comparable results. The precipitation curve and the wax appearance temperature were obtained for two crude oils with different chemical nature using the reported method.     

凸轮逆序测量方法

目前各杂志所发表的关于凸轮测量的文章，所讨论的均是凸轮的顺序测量方法，有关凸轮的逆序测量(反求工程)方法，尚未见于文字。本文将对凸轮的逆序测量方法进行探讨。     

油煤浆的管道输送特性与管路设计原则

通过理论分析和管道实验，探讨了油煤浆在工业管道输送中的流变特性、流动状态和阻力特性，得出了油煤浆的物性参数、表观参数、管道阻力参数的测定值和计算公式，并在此基础上探讨了油煤浆管道输送的设计原则，为油煤浆管路的设计提供基础数据、计算方法和一般原则。     

小议变动成本法的合理性

企业对盈亏临界点的计算通常是以变动成本法为基础，但也有以制造成本法为计算基础的，对于这两种成本方法计算的几种盈亏临界点的情况，本文结合案例，通过比较分析认为：盈亏临界点的计算应当以变动成本法为基础更为合理。     

Synthesis of polymeric pour point depressants for Nada crude oil (Gujarat,India) and its impact on oil rheology

Five flow improvers have been synthesized to study rheological properties of Nada crude oil (Gujarat, India). Anhydride copolymers were prepared making use of the copolymerization of acrylates of different alkyls with maleic anhydride and the Poly (n-alkyl acrylates-co-N-hexadecylmaleimide) were prepared by the reaction of copolymer with hexadecylamine. The additives were purified and characterized by FTIR, GPC. The prepared polymeric additives shows dual function both as wax dispersants and flow improvers and all of them acts as good pour point depressants. Yield stress and the viscosity of the crude oil at different temperatures and concentrations of additives were evaluated by zero friction advanced rheometer AR-500 of TA instrument. Comparison of morphologies and structures of wax crystals or aggregates in waxy crude oils beneficiated with and without a PPD was also done by micro photographic studies which show the modification in wax crystal morphology due to additives.