快速高效隔膜压滤机在鹤壁四矿选煤厂的应用

介绍了快速高效隔膜压滤机的主要性能参数和特点 ;分析了压滤机在煤泥水处理系统中的应用情况和运行结果 ;应用快速高效隔膜压滤机对煤泥水处理系统进行改造后获得了较好的经济及社会效益     

烧碱生产用水的综台利用

阐述了河北盛华化工有限公司综合利用烧碱生产用水的意义，介绍了所采取的措施及效果。     

碳钢贮热水箱的模拟腐蚀试验及涂层耐蚀性能研究

碳钢贮热水箱长期在30～80°C温变的热水环境中工作,易受到热水及水中杂质的腐蚀。研究了不同温度下Q235钢在自来水及含100μg/mLNaCl的自来水中的腐蚀速率。对裸钢及其涂覆相同厚度的不同涂层──酚醛环氧(自制)、钛纳米聚合物和改性聚乙烯后在70°C自来水中的极化曲线进行了比较。采用动电位扫描极化曲线测量和电化学交流阻抗谱法(EIS)分别对涂覆不同涂层的Q235钢进行了耐蚀性能研究。结果表明,3种防腐涂层均具有较佳的抗热水性,耐蚀能力较强,适宜对Q235钢贮热水箱进行防护。     

皮革工业废水的治理技术

介绍了皮革工业废水中所含污染物质铬、硫化物、悬浮物和有机化合物、无机盐等的各种去除方法。     

Hydrogen evolution in alkaline solution on electrolytic nickel-cobalt and nickel-iron deposited with different bath compositions and current densities

Nickel-cobalt and nickel-iron electrodeposits were characterized as hydrogen electrodes in alkaline water electrolysis (6 mol/L KOH, 25°C). The nickel-based codeposits were fabricated with different bath compositions and at different current densities. The hydrogen evolution in water electrolysis on the nickel-based codeposits was apparently enhanced as compared with that on nickel. The improvement of the electrocatalytic behaviour of the hydrogen electrodes is attributed to their composition and an increase of their active surface, which are dependent on the electrodeposition conditions.     

浅谈玻璃钢的加工

本文在实际研究和应用的基础上，对玻璃钢的传统加工方法和特种加工方法，如激光切割、纯水射流切割和磨料水射流切割作了简要论述。     

水蓄冷运行控制分析

随着空调蓄冷技术的不断发展,它已逐渐在节能效果、经济效益和社会效益等方面展现出强大的生命力和广阔的市场。主要探讨了自然分层蓄冷形式,该方式利用温度和密度不同的原理,通过斜温层分隔高、低温水。必须严格进行水蓄冷系统的运行控制,否则极易打破其自然分层的规律。     

水煤浆添加剂及其研究进展

介绍了水煤浆添加剂结构特征对煤成浆性能影响的研究情况及新型高效添加剂的研究进展。目前制浆添加剂主要分为阴离子表面活性剂和非离子表面活性剂;我国与国外的水煤浆添加剂技术相比,还存在一定的差距,特别是分散降粘性质方面,高效、价廉、适用性广的添加剂为数并不多。     

混合物MH-81状态方程的研究——从无限稀释活度系数预测混合物汽液平衡

本文由无限稀释活度系数求取混合物MH-81状态方程的二元相互作用参数,预测了二元混合物的汽液平衡,获得了较满意的结果。     

Thermoplastic extrusion—the mechanism of the formation of extrudate structure and properties

Systems processed by thermoplastic extrusion can be regarded as heterophase polymer melts of incompatible water-plasticized biopolymers. In the process of thermoplastic extrusion, proteins and polysaccharides are melted at high pressure and temperature below the temperature region of their thermal decomposition. Dispersed particles of these systems can be deformed in flow. The mixed-melt anisotropic structure, formed in flow, is fixed by rapid conversion of the melt jet that lets the extruder die from a viscous state to a rubber-like state and then to a glassy state caused by cooling and drying. Incompatibility of proteins and polysaccharides in their water-plasticized melt mixtures impacts on structure formation and texturization during thermoplastic extrusion. Presented at the 20th ISF World Congress and 83rd AOCS Annual Meeting and Expo, May 10–14, 1992, Toronto, Ontario, Canada.