The Transfer of Fibres in the Carding Machine

The problem of understanding the transfer of fibres between carding-machine surfaces is addressed by considering the movement of a single fibre in an airflow. The structure of the aerodynamic flow field predicts how and when fibres migrate between the different process surfaces. In the case of a revolving-flats carding machine the theory predicts a “strong” aerodynamic mechanism between taker-in and cylinder and a “weak” mechanism between cylinder and removal cylinder resulting in effective transfer in the first case and a more limited transfer in the second.     

高性能聚酰亚胺纤维

本文综述了聚酰亚胺纤维的性能及其制备工艺,以及聚酰亚胺纤维在结构方面的研究及纤维成型新技术、新工艺。     

三次样条函数在假设模态综合法中的应用

对复杂结构进行振动分析的模态综合法已发展得较为成熟,它在应用上的限制主要是部件模态假设的困难(尤其是非规则部件),而综合结果的可信度在相当程度上取决于是否能得到一组合理的假设模态 。本文介绍的利用三次样条函数插值法求取转轴耦合系统各部件连续主模态的方法,有效地解决了这个问题。     

混凝土喷射机出料管防粘结措施研究

利用有限元分析软件ANSYS对湿式混凝土喷射机关键零件出料管进行了结构动力学分析,计算了出料管的固有频率及振型,通过对结果的分析提出了出料管防粘结方法和措施,对实际中解决出料管粘料问题具有一定的理论研究和参考价值.     

Surface coating on carbon nanofibers with alumina precursor by different synthesis routes

Alumina-reinforced carbon nanofiber nanocomposites were prepared using different routes; powders mixture, colloidal route and sol-gel process followed by spark plasma sintering (SPS). CNFs/xAl₂O₃ (x = 10-50 vol.%) were prepared through nanopowders mixing in a high-energy attrition milling. The main limitations in the preparation of this kind of nanocomposites are related to the difficulty in obtaining materials with a homogeneous distribution of both phases and the different chemical nature of CNFs and Al₂O₃, which causes poor interaction between them. A surface coating of CNFs by wet chemical routes with an alumina precursor is proposed as a very effective way to improve the interaction between CNFs and Al₂O₃. An improvement of 50% in fracture strength was found for similar nanocomposite compositions when the surface coating was used. The improved mechanical properties of these nanocomposites are caused by stronger interaction between the CNFs and Al₂O₃.     

Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: Experimental

Helicopter blades are made of composite materials mainly loaded in fatigue and have normally relatively thin skins. A through-the-thickness crack could appear in these skins. The aim of this study is to characterize the through-the-thickness crack propagation due to fatigue in thin woven glass fabric laminates. A technological test specimen is developed to get closer to the real loading conditions acting on these structures. An experimental campaign is undertaken which allows evaluating crack growth rates in several laminates. The crack path is linked through microscopic investigations to specify damage in woven plies. Crack initiation duration influence on experimental results is also underlined.     

Directional notch filters for motion control of flexible structures

A new method to design notch filters for MIMO motion control systems with flexible mechanical structures is proposed. The method involves so-called directional notch filters that work only in the direction of the targeted resonant mode. As a result, only one SISO notch filter is required per mode to suppress a resonance throughout the MIMO system. Compared to the conventional approach where a notch filter is placed and tuned in each of the separate control loops, the new approach reduces the order of the controller significantly and facilitates the design process. The directional notch filter is computed using either the input or output mode shapes of the system. A new numerical optimization method to obtain these mode shapes from frequency response data is described. Experiments on a flexible beam setup demonstrate the feasibility of the proposed method in practice.     

双曲余弦-高斯光束的相干模分解

利用傅里叶变换和正交模系展开法,推导出了双曲余弦—晶斯光束的M2因子和归一化模系数的解析表达式,从而建立了双曲余弦-高斯光束的相干模分解理论。提出了一种在实验室中产生双曲余弦-高斯光束的简单方法。     

广东石油化工建设与合成纤维工业的发展

介绍了广东省石油化工建设的最近动态，并讨论了其对合成纤维工业发展的影响．提出了一些建议．     

Consideration of chiral optical fibres

Circular birefringence is a property of chiral materials. In this work, we consider the use of chiral materials in optical fibres to produce circularly birefringent optical fibres and in fibres where a contrast in circular birefringence contributes to forming the waveguide. (-)-menthyl methacrylate is also investigated as a possible material for the fabrication of such fibres.