Global practical tracking of a class of nonlinear systems by output feedback

In this paper we address the practical tracking problem for a class of nonlinear systems by dynamic output feedback control. Unlike most of the existing results where the unmeasurable states in the nonlinear vector field can only grow linearly, we allow higher-order growth of unmeasurable states. The proposed controller makes the tracking error arbitrarily small and demonstrates nice properties such as robustness to disturbances and universal property to reference signals.     

Synthesis, Characterization, and Cytotoxicity Analysis of a Biodegradable Polyurethane

A polyester urethane was synthesized for use in a biodegradable scaffold. The polyurethane was synthesized in a two-step process: first, ester diol was synthesized from lactic acid and polyethylene glycol 400 (PEG 400), then it was polymerized with toluene diisocyanate using dibutyl tin dilaurate (DBTDL) as a catalyst to form a polyester urethane. Polyester urethane has tensile strength of 51-59 MPa and elongation at fracture of 369-439%. FTIR and XRD were used to confirm the formation and structure of the polymer. Hydrolytic degradation was studied in different alkali solutions and in saline water. In order to assess the cellular response of this material, cytotoxicity analysis was carried out against the cell line.     

Nisin expression production from Lactococcus lactis in milk whey medium

BACKGROUND: Nisin is a commercially available bacteriocin produced by Lactococcus lactis ATCC 11454 and used as a natural agent in the biopreservation of food. In the current investigation, milk whey, a byproduct from dairy industries was used as a fermentation substrate for the production of nisin. Lactococcus lactis ATCC 11454 was developed in a rotary shaker (30 °C/36 h/100 rpm) using two different media with milk whey (i) without filtration, pH 6.8, adjusted with NaOH 2 mol L^?1 and without pH adjustment, both autoclaved at 121 °C for 30 min, and (ii) filtrated (1.20 µm and 0.22 µm membrane filter). These cultures were transferred five times using 5 mL aliquots of broth culture for every new volume of the respective media. RESULTS: The results showed that culture media composed of milk whey without filtration supplied L. lactis its adaptation needs better than filtrated milk whey. Nisin titers, in milk whey without filtration (pH adjusted), was 11120.13 mg L^?1 in the second transfer, and up to 1628‐fold higher than the filtrated milk whey, 6.83 mg.L^?1 obtained in the first^t transfer. CONCLUSIONS: Biological processing of milk byproducts (milk whey) can be considered a profitable alternative, generating high‐value bioproducts and contributing to decreasing river disposals by dairy industries. Copyright © 2008 Society of Chemical Industry     

反应温度对聚苯胺薄膜生长的影响

在不同反应温度条件下采用原位聚合法在石英基片上制备了聚苯胺薄膜．对薄膜样品进行了紫外光谱、SEM、电性能表征。实验结果表明，过高的合成温度会加速聚合反应过程，抑制膜厚的增长，引起薄膜的热降解，进而对样品的导电性产生不良影响。根据生长速率与合成温度的依赖关系，估算了聚合反应的活化能Ea=34.4kJ/mol。     

SARS流行预测分析

表面上突如其来的SARS本质上却有极规律的内在发展演化机制，遵从初始缓慢增长、加速、减速和稳定终止四个阶段总体道路，自然和社会生活领域众多事件演化都符合这一规律，因而可以运用广义的Logistic生长模型进行描述。基于先期流行的广东SARS感染病例数据，以及尚未结束的北京、全国2003年SARS流行统计数据，借助于最优化分析技术，运用广义的Logistic生长模型对该事件演化特征参量进行了辨识；在此基础上，又借助于广义生长模型的特例——Gompertz函数进行了演化过程的预测，并与其他生长模型结果进行了比较。研究表明，生长模型模拟结果均与实际数据有很好的一致性，可以用来预测事件的发生演化过程，此次SARS事件堪称生长模型的经典实例。     

Creep Crack Growth in Polypropylene Film with Various Crack Lengths at Diverse Stresses and Temperatures

Creep crack growth rates were measured using centrally cracked tension specimens of thin polypropylene film with different crack lengths at various stresses and temperatures. The creep crack growth rates were correlated with the stress intensity factor. There was the region of the minimum constant crack growth rate which occupied more than 70% of the total creep failure life. This constant creep crack growth rate characteristics were analyzed on the basis of the stress-dependent Arrhenius type thermally activated process.     

A novel in situ synthesis of dicalcium phosphate dehydrate nanocrystals in biodegradable polymer matrix

In the paper, we found a novel method to synthesize dicalcium phosphate dehydrate (DCPD) nanocrystals by in situ reaction in biodegradable PDLLA matrix. Calcium hydrid was selected as calcium source of DCPD, which is different from general methods. The method is not only simple and effective to synthesize Ca–P particles, but also can avoid the aggregation of inorganic nanoparticles in the course of their being dispersed into polymer matrix.     

Modelling diffusion-controlled kinetics in equilibrium and driven alloys

Summary We introduce a very simple model for thermally activated atomic migration on a lattice, and several techniques to handle it. For thermodynamical systems, the model can be used for simulating decomposition paths taking into account relevant metallurgical features. Close to equilibrium, the simplest mean-field approximation of the model can be linearized with respect to the departure from equilibrium; one then gets a microscopic interpretation of classical phenomenological coefficients, such as mobility, interfacial transfer coefficient, rate constants for the coupled relaxation of concentration and order fields. Further away from the equilibrium, the nonlinearities can be taken into account in a consistent way. For driven alloys, i.e. alloys submitted to external forcing, forced atomic migration is added to the model and new features emerge: the model is supported by several experimental results some of which confirmed its predictions a posteriori.     

RETARDATION AND REPAIR OF FATIGUE CRACKS BY ADHESIVE INFILTRATION

Abstract— This paper presents results which demonstrate that polymeric filler materials, such as low-viscosity epoxies, can be vacuum-infiltrated into fatigue cracks in 7050 aluminium alloy to produce significant levels of fatigue crack retardation. It was found that the main test variable affecting the degree of retardation was the stress level at which the adhesive was introduced and cured. Two infiltrated adhesives were tested.
Infiltration at 0% (of the original) peak fatigue stress level produced negligible retardation, while infiltration at the 80% stress level produced about 300% increase in fatigue life for one adhesive and 3000% for the other adhesive. For the highest infiltration stress level both crack-face wedging and adhesion contributed initially to the retardation, but the adhesive component ceased after a crack grew through the adhesive to the original crack tip position. The results are discussed in terms of the applicability of the technique to highly-stressed aircraft components.