The current and residual value of superphosphate for lupins grown in rotation with oats and wheat on a deep sandy soil

In a field experiment on a deep pale-yellow sand in a 600 mm per annum rainfall Mediterranean environment of south-western Australia, six levels of phosphorus (P) as superphosphate (O up to 546 kg P ha^–1) were applied once only, to the soil surface, before sowing lupins (Lupinus angustifolius). The lupins were grown in a continuous arable cropping rotation with, in successive years, oats (Avena sativa), wheat (Triticum aestivum), lupins. Five such rotations were started in the experiment from 1985 to 1989. The experiment continued until the end of 1990.The relationship between lupin seed (grain) yields and the level of P applied was measured in the year of P application for five successive years (1985 to 1989). The relationship had the same general form but it varied between years, largely due to different maximum yields (yield plateaux) in each year.The residual value of superphosphate applied three years previously was measured for lupins on two occasions (1988 and 1989) relative to superphosphate applied in the current year. The residual values was different in the two years. The superphosphate applied three years previously was about 30% as effective as freshly applied superphosphate in 1988, and 12% as effective in 1989.At each harvest, the relationship between grain yield and the P concentration in the grain differed for different species. However, for each species at each harvest, the relationship was similar regardless of when the P was applied in the previous years. Thus each species had the same internal efficiency of P use curve, and yields varied only with P concentration in tissue.Bicarbonate-extractable soil P was determined on soil samples taken in mid-July of 1989 and 1990. These soil test values were related to grain yields at harvest. The relationship between yield and soil test values had the same general form but varied for different species within years and for each species between years. It also varied for each species within years depending on the year the P was applied.     

N-溴丁二酰亚胺／吡啶氧化合成己二酰基双偶氮化合物

以己二酰二氯和不同取代基的苯肼合成了N,N'-二芳基己二酰二肼类中间体,然后在N-溴丁二酰亚胺(NBS)／吡啶氧化体系下室温合成了8种己二酰基双偶氮化合物。第一步反应条件为:n(己二酰二氯):n(取代苯肼)=1:2,反应温度0-5℃,反应时间4 h,收率80%-93％;第二步反应条件为:n(N,N’-二芳基己二酰二肼):n(NBs／吡啶)=1:2,氧化反应时间0．5-1．0 h,收率80%-94%。并用元素分析、IR、1H NMR对合成的中间产物及目标化合物进行了表征。     

Development of a single loop EPR test method and its relation to grain boundary microchemistry for alloy 600

A single loop electrochemical potentiokinetic reactivation test method has been developed for alloy 600 that produces good passivation on all the surfaces, good etching during the reactivation scan and no appreciable pitting. It is able to quantify and discriminate between samples with a wide range of degree of sensitization. The Pa value correlates well with the minimum level of chromium in the depletion regions at the grain boundaries. It has been shown that the width of the attacked regions is much larger than the width of chromium depletion regions and it does not show any direct correlation with either depth or width or with a volume parameter of chromium depletion regions. It has been shown that the chromium carbides are not attacked during the test and that the intragranular regions attacked during the test are the sites of chromium carbides in the grain matrix. A modified Pa parameter is shown to be sensitive down to 7.5 wt% chromium in the depletion regions and indicates that the intragranular carbides have shallower depletion profiles than those at grain boundaries. Comparison of the results of the single loop and the double loop tests showed a good correlation.     

氮肥工业与21世纪的生物能源

介绍近年来美国生物能源的开发进展情况及其先进的支撑系统，提出如何使我国氮肥工业在发展我国生物能源中起促进作用。     

注入氮离子的SiC涂层阻氢性能研究

利用离子束混合－离子注入（Ar^ ）和磁控溅射相结合的实验技术在HR－1不锈钢基体上制备了注入N^ 的SiC涂层，并用表面分析手段对所制备涂层的表面形貌，剖面形貌、相结构，表面成分，表面元素的化学态进行了分析，结果表明：制备的涂层结构致密，表面平整、膜层成分均匀；涂层与基体之间形成了一明显的过渡层，增强了涂层和基体之间的结合力，用二次离子质谱（SIMS）对充氘涂层的阻氢性能进行了定性分析，结果表明，涂层元素与氢形成稳定的化学键，抑制了氢的扩散和迁移，使得涂层具有一定的阻氢能力。     

肥料中有机质分析方法的探讨

探讨肥料中有机质的分析方法。通过对两个肥料标准中有机质的分析方法进行比较，对各标准中有机质检验过程中的影响因素进行了分析，确定了本地区有机肥料中有机质适宜的分析方法。     

局部施肥对植株生长及根系形态的影响

本文论述了局部施肥对植株地上部与地下部的影响。局部施肥促进了施肥区根系的发达 ,第一侧根与第二侧根较多 ,根的吸收表面积增多 ,根鲜重增加 ,对养分的吸收能力增强 ,但整个根系与地上部的干鲜重下降。     

Award for distinguished contribution to education and training in psychology: Jill N. Reich.

Presents the citation, biography, and selected bibliography of Jill N. Reich, one of the 1993 recipients of the American Psychological Association's Award for Distinguished Contribution to Education and Training in Psychology. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

驱动AM-OLED的2-a-Si:H TFT的设计与制作

a-Si：H／SiNx：H TFT在长时间栅偏应力作用下，会产生阈值电压漂移，这主要是由绝缘层电荷注入和有源层亚稳态产生而引起的。针对电荷注入现象，文章首先通过控制源气体SiH4和NH3流量的不同，利用PECVD制作了不同N／Si比（0．87～1．68）的氮化硅绝缘材料，对其进行了椭偏、红外和光电子散射能谱（EDS）测试。制作了不同的MIS结构电容，对其进行老化实验和C-V测试分析，结果表明稍富氮（N／Si比稍大于标准Si3N4的化学计量比1．33）的氮化硅做成的M1S样品在老化前后C-V曲线偏移不是很明显，表明其缺陷态密度相对较小，能够有效减小半导体／绝缘层界面间的电荷注入。设计了驱动OLED的2-a-Si：H TFT像素电路及其阵列版图，优化了电路中的几个关键参数，即T1的W／L=2．5、T2的W／L=25和存储电容Cs=0．8pF。运用7PEP生产工艺，制作了13cm（5．2in）的TFT阵列样品。对TFT进行I-V特性测试，其开态电流为10μA，开关比为10^6；对AMOLED显示屏样品进行了静态驱动下的亮度测试，其最高亮度为341cd／m^2。     

基于L298N芯片对离子渗氮中压强的控制

离子渗氮工艺对炉体内压强的控制要求比较高，本文设计了一种基于L298N芯片驱动直流电动机控制的气体流量控制器，可用于控制反应炉的抽气气体流量，提高了炉体压强控制精度，降低了生产成本。