NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

Studies on relationship between activity and electron density on carbonyl oxygen in sex pheromone mimics of the American cockroach,part XI

From the relationship between structures of the 2-substituents of verbanyl analogs and their sex pheromone activities to the American cockroach, electron density of the carbonyl oxygen atom in the substituent, as estimated by the [¹⁷O]NMR chemical shift, was estimated to be an important factor which influenced the activity, in addition to length of the substituent and the position of the carbonyl group. (+)-Verbanyl methylcarbonate (XX), possessing the highest electron density on the carbonyl oxygen atom, showed the strongest activity among the analogs.For Part X, see Manabe et al., 1983. J. Chem. Ecol. 9:533–549.     

Study of alinite cement hydration by impedance spectroscopy

Two types of alinite cements, Mg-alinite and Zn-alinite, were synthesized using the reagent grade chemicals. Their hydration behavior was compared with ordinary Portland cement (OPC) using impedance spectroscopy (IS) and ²⁹Si nuclear magnetic resonance (NMR) spectroscopy. The bulk resistance in the IS spectra and the intensity ratio of the hydrous (Q₁ and Q₂) to anhydrous (Q₀) phases in the NMR spectra were estimated as the extent of hydration. The results obtained from both techniques were consistent each other. Mg-alinite had a comparable hydration rate to OPC and Zn-alinite exhibited faster hydration kinetics than Mg-alinite.     

Compositional analysis of biodegradable polyphosphoester copolymers using nmr spectroscopic methods

The chemical composition and quantitative molar ratios among all components of biodegradable polyphosphoester copolymers of DL ‐lactide and ethylphosphate were determined by a comprehensive set of NMR spectroscopic methods. The polyphosphoester copolymers studied were synthesized using condensation polymerization of oligomeric DL ‐lactide prepolymers and ethyl dichlorophosphate. Conclusive identification of the chemical shift patterns of all functional groups in the copolymers required additional NMR methods such as ³¹P‐NMR and two‐dimensional ¹H–¹H COSY NMR, in addition to the synthesis and comparative NMR analysis of model compounds possessing identical phosphoester linkages in the polyphosphoester copolymers. For the polymers synthesized using the bulk polycondensation process, ¹H–¹H COSY NMR analysis revealed the presence of a small amount of side products that were undetected by ¹H‐NMR alone. These side reactions most likely occurred between the pendant ethoxy group of the phosphoesters and the hydrogen chloride gas generated in the bulk polycondensation process. ³¹P‐NMR spectra of the copolymers revealed a consistent triple‐peak pattern characteristic of phosphoesters linked to a racemic mixture of D,L ‐lactides. These results offered new insight into the side reactions occurring in bulk polymerization of polyphosphoesters and provided a powerful tool of characterizing complex biodegradable polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4021–4031, 2003     

聚天冬氨酸的合成与表征

介绍了以L -天冬氨酸为原料 ,热缩合成聚天冬氨酸酐 ,水解得到聚天冬氨酸的合成工艺。采用凝胶色谱法测定了聚天冬氨酸的分子量 ,并用核磁共振对其进行了表征。     

Isomerization of n-hexane over mono- and bimetallic Pd–Pt catalysts supported on ZrO2–Al2O3–WOx prepared by sol–gel

The catalytic performance of mono- and bimetallic Pd (0.6, 1.0 wt.%)–Pt (0.3 wt.%) catalysts supported on ZrO₂ (70, 85 wt.%)–Al₂O₃ (15, 0 wt.%)–WO_x (15 wt.%) prepared by sol–gel was studied in the hydroisomerization of n-hexane. The catalysts were characterized by N₂ physisorption, XRD, TPR, XPS, Raman, NMR, and FT-IR of adsorbed pyridine. The preparation of ZrW and ZrAlW mixed oxides by sol–gel favored the high dispersion of WO_x and the stabilization of zirconia in the tetragonal phase. The Al incorporation avoided the formation of monoclinic-WO₃ bulk phase. The catalysts increased their S_BET for about 15% promoted by Al₂O₃ addition. Various oxidation states of WO_x species coexist on the surface of the catalysts after calcination. The structure of the highly dispersed surface WO_x species is constituted mainly of isolated monotungstate and two-dimensional mono-oxotungstate species in tetrahedral coordination. The activity of Pd/ZrW catalysts in the hydroisomerization of n-hexane is promoted both with the addition of Al to the ZrW mixed oxide and the addition of Pt to Pd/ZrAlW catalysts. The improvement in the activity of Pd/ZrAlW catalysts is ascribed to a moderated acid strength and acidity, which can be correlated to the coexistence of W⁶⁺ and reduced-state WO_x species (either W⁴⁺ or W⁰). The addition of Pt to the Pd/ZrAlW catalyst does not modify significantly its acidic character. Selectivity results showed that the catalyst produced 2MP, 3MP and the high octane 2,3-dimethylbutane (2,3-DMB) and 2,2-dimethylbutane (2,2-DMB) isomers.     

聚天冬氨酸的合成与表征

以L-天冬氨酸为原料,热缩合成聚天冬氨酸酐,水解得到聚天冬氨酸。采用凝胶色谱法(GPC)测定了聚天冬氨酸的分子量,并用核磁共振(NMR)对其进行了表征。     

Effect of the electrolyte composition on In and Ag–In alloy electrodeposition from cyanide electrolytes

A procedure for preparation of clear and stable indium cyanide electrolytes, containing indium salt, d(+)-Glucose and KCN is proposed. NMR investigations revealed that the formation of a complicated indium complex in which the products of the disintegration of d(+)-Glucose in the KCN-solution are closely situated to the indium ion ensures the clearness of the electrolyte. The effect of nitrate, chloride and sulphate ions on the electrochemical processes of indium and silver–indium alloy electrodeposition is studied by cyclic voltammetry. During alloy electrodeposition under galvanostatic conditions unique spatio–temporal structures are observed on the cathodic surface.     

Barocalorimetric technique for monitoring pressurized copolymer reactors

The problem of on‐line estimation of the conversion and composition evolutions in a pressurized batch copolymer reactor with temperature and pressure measurements was addressed. The estimation model consisted of mass and energy balances with a pressure equation built from phase‐equilibrium considerations. The application of a nonlinear geometric estimation approach yielded the underlying solvability condition with physical meaning, a straightforward estimator construction, and a conventional‐like tuning procedure. The resulting barocalorimetric estimator was an on‐line dynamic measurement processor with a model‐based predictor and a measurement‐driven corrector, and whose implementation did not require the polymerization rates and heat‐transfer coefficient function dependencies. The technique was tested with a representative laboratory styrene–butadiene system. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 475–482, 2005     

基于1H NMR测定和基团贡献法预测石油馏分的热化学性质

测定了两种原油 2 0个石油馏分的¹H NMR谱和氢、碳元素含量等结构参数 ,以及馏分的燃烧焓、蒸发焓等热化学性质 .假设每个石油馏分仅由CH₃ 、CH₂ 、CH、ACH和C这 5种简单基团构成 ,基于¹H NMR测定和元素分析结果解出石油馏分平均分子结构中的基团数目 ,再用纯有机物的基团贡献法预测石油馏分的燃烧焓、蒸发焓 ,预测值与实验数据吻合良好