Two-dimensional correlation relaxometry studies of cement pastes performed using a new one-sided NMR magnet

We present preliminary results of the first NMR T₁-T₂ two-dimensional relaxation correlation experiments performed using a one-sided NMR system in cement based materials. Two-dimensional correlation relaxometry has itself only recently been demonstrated in cement paste where it proved to be a particularly sensitive probe of pore-water dynamics providing direct information on exchange of water between the gel and capillary pore networks. Further to this we have observed differences in the structural development of a selection of cement pastes throughout the early stages of hydration and verified the theoretical frequency dependence of the ratio T₁ / T₂. When coupled with instrumentation developments in one-sided NMR magnets the way is opened to detailed, spatially resolved studies of the development of hydration and porosity in the surface layers (top 50 mm) of cementitious materials. A new magnet, suitable for such applications, is discussed.     

The study on the conductivity of styrene-maleic anhydride copolymer electrolytes based on poly(ethylene glycol)400 and LiClO4

Polyelectrolytes, in this study were synthesized from styrene-maleic anhydride (SMA) copolymer, poly(ethylene glycol)400 (PEG400), and lithium perchlorate (LiClO₄). Fourier transform infrared spectroscopy (FTIR), and magic angle spinning (MAS) solid-state NMR were used to monitor the interaction between Li⁺ ions and polymer. The results of FTIR and MAS solid-state NMR indicate the Li⁺ ions are preferentially coordinated to the ether oxygen of PEG. The T_g of the PEG segments in polyelectrolyte increases with LiClO₄ concentration, as determined by differential scanning calorimetry (DSC), indicating that solubility of the Li⁺ ions in the host polymer increases with the PEG content. Impedance spectroscopy (IS) shows that the bulk conductivity of polyelectrolytes and the conductivity behavior obeys the Vogel-Tamman-Fulcher (VTF) equation.     

Gasoline composition determined by H NMR spectroscopy

A fast and simple ¹H NMR spectroscopic method was developed for the concentration measurement of aromatic, olefinic and aliphatic fractions in gasoline samples. Simultaneously, individual components such as benzene, methyl tert-butyl ether and several dienes could be determined. The method relies on only a few, well-established assumptions about the molecular compositions and is therefore applicable to a broad range of gasolines. It is well suited for laboratories with high sample throughput since measurement time is short and all concentrations are determined within one NMR experiment. The method was applied to commercial gasolines and samples used in European round robin tests. Comparisons of NMR and round robin test results showed excellent agreement.     

高支化度酯类增塑剂的结构鉴定

利用AV50 0核磁共振波谱仪鉴定了一种从聚氨酯材料中分离出的增塑剂。这是一种新型的性能优良的耐迁移性脂肪族增塑剂。使用的手段有红外光谱 ,1 H NMR ,1 3C NMR ,1 3C 1 HCOSY ,1 H 1 HCOSY以及DEPT等技术。     

Characterization of pedicel,paper, and larval silk from nest ofPolistes annularis (L.)

The pedicel, nest paper, and larval silk ofPolistes annularis nests were analyzed by high-resolution solid-state [¹³C]NMR. The pedicel was found to have a high nitrogen content (11%), and the NMR spectra indicated that it is a mixture of carbohydrate and protein. The pedicel protein has an amino acid composition that is very rich in glycine, alanine, serine, and proline (67% of identified residues), similar to that of some insect silks. Solid-state [¹³C]NMR indicated that the nest paper is composed predominantly of cellulose. Silk, spun by matureP. annularis larvae, was shown by [¹³C] NMR and amino acid analysis to be a protein very high in serine and alanine (53%), but the amino acid composition is distinct from that of the pedicel protein.     

Reactivity,chemical structure,and molecular mobility of urea–formaldehyde adhesives synthesized under different conditions using FTIR and solid‐state 13C CP/MAS NMR spectroscopy

This study was conducted to investigate the effects of reaction pH condition and hardener type on the reactivity, chemical structure, and molecular mobility of urea–formaldehyde (UF) resins. Three different reaction pH conditions, such as alkaline (7.5), weak acid (4.5), and strong acid (1.0), were used to synthesize UF resins, which were cured by adding four different hardeners (ammonium chloride, ammonium sulfate, ammonium citrate, and zinc nitrate) to measure gel time as the reactivity. FTIR and ¹³C‐NMR spectroscopies were used to study the chemical structure of the resin prepared under three different reaction pH conditions. The gel time of UF resins decreased with an increase in the amount of ammonium chloride, ammonium sulfate, and ammonium citrate added in the resins, whereas the gel time increased when zinc nitrate was added. Both FTIR and ¹³C‐NMR spectroscopies showed that the strong reaction pH condition produced uronic structures in UF resin, whereas both alkaline and weak‐acid conditions produced quite similar chemical species in the resins. The proton rotating‐frame spin–lattice relaxation time (T_1ρH) decreased with a decrease in the reaction pH of UF resin. This result indicates that the molecular mobility of UF resin increases with a decrease in the reaction pH used during its synthesis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2677–2687, 2003     

Sequence analysis and fiber properties of a blend of poly(ethylene terephthalate) and poly(ethylene terephthalate‐co‐4,4′‐bibenzoate)

Blends of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate‐co‐4,4′‐ bibenzoate) (PETBB) are prepared by coextrusion. Analysis by ¹³C‐NMR spectroscopy shows that little transesterification occurs during the blending process. Additional heat treatment of the blend leads to more transesterification and a corresponding increase in the degree of randomness, R. Analysis by differential scanning calorimetry shows that the as‐extruded blend is semicrystalline, unlike PETBB15, a random copolymer with the same composition as the non‐ random blend. Additional heat treatment of the blend leads to a decrease in the melting point, T_m, and an increase in glass transition temperature, T_g. The T_m and T_g of the blend reach minimum and maximum values, respectively, after 15 min at 270°C, at which point the blend has not been fully randomized. The blend has a lower crystallization rate than PET and PETBB55 (a copolymer containing 55 mol % bibenzoate). The PET/PETBB55 (70/30 w/w) blend shows a secondary endothermic peak at 15°C above an isothermal crystallization temperature. The secondary peak was confirmed to be the melting of small and/or imperfect crystals resulting from secondary crystallization. The blend exhibits the crystal structure of PET. Tensile properties of the fibers prepared from the blend are comparable to those of PET fiber, whereas PETBB55 fibers display higher performance. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1793–1803, 2004     

Microstructure determination and thermal studies of n‐acryloylcarbazole/vinyl acetate copolymers

Copolymers of N‐acryloylcarbazole (A) and vinyl acetate (V) were synthesized by bulk polymerization using benzoyl peroxide (BPO) as free‐radical initiator at 65°C in different in‐feed ratios. The composition of the copolymer was determined by ¹H‐NMR spectrum. The comonomer reactivity ratios, determined by Kelen–Tudos (KT) and nonlinear error‐in‐variables (EVM) methods, were r_A= 16.75 ± 1.38, r_V = 0.015 ± 0.002, and r_A = 16.36, r_V = 0.015, respectively. Complete spectral assignments of the ¹H and ¹³C{¹H} NMR spectra of the copolymers were done by the help of distortionless enhancement by polarization transfer (DEPT) and two‐dimensional NMR techniques such as heteronuclear single quantum coherence (HSQC) and total correlation spectroscopy (TOCSY). The methine and methylene carbon resonances were found to be compositional as well as configurational sensitive. The signals obtained were broad pertaining to the restricted rotation of bulky carbazole group. The thermal stability and glass‐transition temperatures (T_g) of the copolymers were found to be dependant on polymer composition and characteristic of rotational rigidity of the polymer chain. Variation in the values of T_g with the copolymer composition was found to be in good agreement with theoretical values obtained from Johnston and Barton equations. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2720–2733, 2007     

Identification of nine acetylenic fatty acids, 9-hydroxystearic acid and 9,10-epoxystearic acid in the seed oil ofJodina rhombifolia hook et arn. (Santalaceae)

In addition to some usual fatty acids, the seed oil ofJodina rhombifolia (Santalaceae) contains nine acetylenic fatty acids [9-octadecynoic acid (stearolic acid) (1.1%),trans-10-heptadecen-8-ynoic acid (pyrulic acid) (20.1%), 7-hydroxy-trans-10-heptadecen-8-ynoic acid (2.3%),trans-10,16-heptadecadien-8-ynoic acid (0.7%), 7-hydroxy-trans-10,16-heptadecadien-8-ynoic acid (0.1%),trans-11-octadecen-9-ynoic acid (ximenynic acid) (20.3%), 8-hydroxy-trans-11-octadecen-9-ynoic acid (12.2%),trans-11,17-octadecadien-9-ynoic acid (1.5%), 8-hydroxy-trans-11,17-octadecadien-9-ynoic acid (1.3%), 9-hydroxystearic acid (<0.1%) and 9,10-epoxystearic acid (0.7%)]. The fatty acids have been analyzed by gas chromatography/mass spectrometry of their methyl ester and 4,4-dimethyloxazoline derivatives. The hydroxy fatty acid methyl esters have been examined also as trimethyl-silyl ethers. Furthermore, the fatty acid methyl esters (FAME) have been fractionated according to their polarity (FAME-A: nonhydroxy; FAME-B: hydroxy fatty acids) and to their degree of unsaturation (FAME-A1/A2; FAME-B1/B2) by preparative thin-layer chromatography and argentation chromatography, respectively. All of these fractions have been analyzed by ultraviolet and infrared spectroscopy, and the fractions FAME-A and FAME-B have been analyzed further by nuclear magnetic resonance (¹H,¹³C, 2D H/C, attached proton test) spectroscopy and gas chromatography/mass spectrometry. This work is dedicated to the 65th birthday of Prof. Dr. K. Pfeilsticker, Institut of Food Science, University Bonn (Germany).     

Influence of polymer on cement hydration in SBR-modified cement pastes

The influence of styrene-butadiene rubber (SBR) latex on cement hydrates Ca(OH)₂, ettringite, C₄AH₁₃ and C-S-H gel and the degree of cement hydration is studied by means of several measure methods. The results of DSC and XRD show that the Ca(OH)₂ content in wet-cured SBR-modified cement pastes increases with polymer-cement ratio (P/C) and reaches a maximum when P/C is 5%, 10% and 10% for the pastes hydrated for 3 d, 7 d and 28 d, respectively. With wet cure, appropriate addition of SBR promotes the hydration of cement, while the effect of SBR on the content of Ca(OH)₂ and the degree of cement hydration is not remarkable in mixed-cured SBR-modified cement pastes. XRD results illustrate that SBR accelerates the reaction of calcium aluminate with gypsum, and thus enhances the formation and stability of the ettringite and inhibits the formation of C₄AH₁₃. The structure of aluminum-oxide and silicon-oxide polyhedron is characterized by ²⁷Al and ²⁹Si solid state NMR spectrum method, which shows that tetrahedron and octahedron are the main forms of aluminum-oxide polyhedrons in SBR-modified cement pastes. There are only [SiO₄]⁴⁻ tetrahedron monomer and dimer in the modified pastes hydrated for 3 d, but there appears three-tetrahedron polymer in the modified pastes hydrated for 28 d. The effect of low SBR dosage on the structure of aluminum-oxide and silicon-oxide polyhedron is slight. However, the combination of Al³⁺ with [SiO₄]⁴⁻ is restrained when P/C is above 15%, and the structure of Al³⁺ is changed obviously. Meantime, the polymerization of the [SiO₄]⁴⁻ tetrahedron in C-S-H gel is controlled.