高熵合金氮化物薄膜的研究进展

基于多元高熵合金思想制备的高熵合金氮化物薄膜由于多种元素相互混合,易于产生高熵效应、晶格畸变效应和缓慢扩散效应,使得该新型薄膜体系形成简单的非晶结构和纳米晶结构。依赖于成分和制备工艺,多元高熵合金氮化物薄膜表现出简单的固溶体结构和优异的性能,因而在许多领域极具应用潜力。综述了高熵合金氮化物薄膜的发展概况、组织特点、性能特征、制备方法和应用前景,并对高熵合金氮化物薄膜的发展方向进行了展望。     

光学遥感器薄膜加热片阻值计算及应用

论述了航天用薄膜加热器的工作原理,推导和总结了同一加热区内三种不同串、并联关系的薄膜加热片单位面积阻值的通用计算公式。最后通过实例验证了该公式的正确性。对于具有复杂加热区的空间光学遥感器,依据该公式可以方便快捷地设计出各种串、并联关系的薄膜加热器。     

全固态裸露式Ag／AgCl参比电极的研制及应用

该文报道了一种树脂接界全固态裸露式Ag／Agcl参比电极,勿需电镀氯化,制备工艺简单,性能稳定,是对电解型Ag／AgCl参比电极的一大改进。可代替饱和甘汞电极作为通用型参比电极,同时可减少汞对环境所造成的二次污染,在温度大于75℃时仍能保持良好性能,突破了甘汞电极的局限。     

Memory effects of all‐solution‐processed oxide thin‐film transistors using ZnO nanoparticles

Abstract— Non‐volatile memory effects of an all‐solution‐processed oxide thin‐film transistor (TFT) with ZnO nanoparticles (NPs) as the charge‐trapping layer are reported. The device was fabricated by using a soluble MgInZnO active channel on a ZrHfO^x gate dielectric. ZnO NPs were used as the charge‐trapping site at the gate‐insulator—channel interface, and Al was used for source and drain electrodes. Transfer characteristics of the device showed a large clockwise hysteresis, which can be used to demonstrate its memory function due to electron trapping in the ZnO NP charge‐trapping layer. This memory effect has the potential to be utilized as a memory application on displays and disposable electronics.     

Organic wavelength‐converting‐film‐based hybrid planar white light‐emitting diodes

Abstract— In this study, organic wavelength‐converting films (WCFs) applied to InGaN blue LED‐based hybrid planar WLED has been fabricated. The organic dye layer in the WCF was formed between the upper and bottom polymer sheets by using a simple roll‐laminating technique. Subsequently, the hybrid planar WLEDs have been fabricated based upon these films. The luminous efficiency of green WCF‐based hybrid planar WLEDs with a single blue LED chip was 34.6 lm/W and that of red‐WCF‐assisted green WCF‐based hybrid planar WLEDs was 27.3 lm/W under 20 mA. The use of WCF to fabricate hybrid planar WLEDs showed better stability than that of directly coating organic color‐convergence materials (CCMs) on the LED chips. It only decreased to about 10% of the initial wavelength‐converting intensity after 1 hour of continual operation at 20 mA.     

Frictional properties of VA‐mode alignment‐film surfaces studied by frictional force microscopy

Abstract— The surface‐friction characteristics of the post‐bake temperature were compared to that of the rubbing condition on VA‐mode alignment films (AFs) using frictional force microscopy (FFM). The surface roughness and the surface frictional force increased when the temperature was elevated. However, the frictional asymmetry could not be detected by the frictional loop due to the instability of the side‐chain molecular arrangement. For the inter‐influences of the total friction and surface roughness, the density of the side chain was changed and it was intentionally rubbed for evaluation. The results showed that the total friction was higher when the rubbing was stronger and side‐chain density lower, and the surface roughness also increased in the same manner. This can be explained by the potential interaction due to the curved structure of the side‐chain surface that establishes the probe that is scanned and the top surface layer. In order to confirm the influence of the pre‐tilt angle on the tilt of the side chain, a test cell was produced under the same conditions and evaluated. The results showed that the pre‐tilt‐angle decreased according to the difference in density of the side chain and strength of rubbing after injecting liquid‐crystal (LC).     

Optimization of screen-printing parameters of SN9000 ink for pinholes using Taguchi method in chip on film packaging

The influence of pinholes on the chip on film (COF) in screen-printing was studied in this paper. Yield improvement is the most challenging part of COF manufacturing in view of its processing complexity, mainly in the screen-printing process. The process parameters such as ink capacity, origin control distance, angle of the squeezer, method of mixing, freshness of ink, speed of printing, and speed of scraper are considered to improve the pinholes. In Taguchi method, a two level orthogonal array is used to determine the signal-to-noise (S/N) ratio. Analysis of variance and the F-test values are used to determine the most significant process parameters affecting the pinholes. Confirmation analysis tests with the optimal levels of process parameters are carried out. The results of the experiment show that Taguchi method is a very suitable approach with regard to solving quality problems related to such pinholes.     

On the determination of the steady film profile for a non-Newtonian thin droplet

A shooting method is used to determine a solution to a third-order ODE modeling the steady profile of a non-Newtonian thin droplet. We compare a direct approach to an iterative approach using a secant method. We obtain a nonlinear relationship between the contact angle ? and the position of the contact line r. From this nonlinear relationship we use curve fitting to obtain an empirical law of the form tan?∝r^f(k) where k is the power law coefficient and f is a nonlinear function of k.     

Electrochemical determination of imidacloprid using nanosilver Nafion/nanoTiO2 Nafion composite modified glassy carbon electrode

A novel biocompatible environment friendly nanosilver Nafion^®/nanoTiO₂ Nafion^® modified glassy carbon electrode was prepared by a simple procedure and characterized. This modified electrode was used as a sensing electrode for the detection of imidacloprid. Cyclic voltammetry, differential pulse voltammetry and amperometry were used in this work. The reduction potential of imidacloprid on this electrode is lower compared to other electrodes reported in the literature. The LOD and LOQ values obtained for the sensing of imidacloprid on this modified electrode are comparable to the values reported in the literature.     

Electrochemical deposition of polypyrrole/graphene oxide composite on microelectrodes towards tuning the electrochemical properties of neural probes

By exploiting the electrostatic interaction between positively charged pyrrole cation radicals and negatively charged graphene oxide (GO) sheets, we prepared polypyrrole/graphene oxide (PPy/GO) composite films by a one-step electrochemical process. We studied the effects of the polymerization current density and the GO content in electrolyte on the formation of PPy/GO coatings onto platinum neural microelectrode sites. As compared with pure PPy film, PPy/GO coatings show a rougher surface feature with micrometer-scale bulges. The impedance of the PPy/GO coated Pt electrode is only about 10% of the bare Pt electrode at the biological relevant 1 kHz, while the charge capacity density is more than two orders of the magnitude of the bare Pt electrode. Moreover, the PPy/GO coated Pt electrodes show higher performance than the PPy coated electrodes for the application of neural probe.