石英晶体微天平的研究进展综述

石英晶体微天平(QCM)能够感知到纳克级的质量变化,在分析化学、电化学、有机化学、生物医学等方面得到了广泛的应用。根据与QCM电极表面相接触的研究介质即应用对象的不同,分别阐述了刚性薄层、牛顿流体、粘弹性膜层的基础方程、分析方法及应用,并探讨了其存在的问题与发展趋势。     

应用静电纺丝法制备PZT纳米纤维薄膜

提出应用静电纺丝法制备PZT纳米纤维薄膜。研究中配制PZT溶液后再进行静电纺丝,获得了PZT纳米纤维薄膜,并且通过调整纺丝时间和沉积次数来控制纳米纤维薄膜的厚度。运用SEM对获得的热处理前后的薄膜进行了观察对比,测量其平均直径约为200 nm;运用XRD对退火后的样品进行分析,测得样品的主要成分为Pb(Zr0.52Ti0.48)O3,证明所制备的正是PZT薄膜;运用AFM测得薄膜的表面粗糙度为1.034 nm,说明该纳米薄膜材料非常的均匀整齐。     

基于电子印刷工艺的薄膜热电偶研制

薄膜热电偶由于具有体积小、热容量小及响应速度快等优点成为近年来学者们研究的重点。薄膜制备常用的方法有射频溅射法、离子镀膜法以及直流脉冲磁控溅射法等,但这些方法操作设备复杂,制作时间长,效率低,成功率低且复现性差。用电子印刷工艺制备薄膜热电偶,将Au,Pt的溶液化微纳米材料印制在基板上,印刷成为Au-Pt薄膜热电偶,该方法操作方便快捷,对电极材料污染小。通过试验证明:采用电子印刷工艺制备的Au-Pt薄膜热电偶符合Au-Pt热电偶检定规程的要求,热电偶精度高,重复性和一致性好。     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

阵列式多针-柱电极装置实现离子风的实验与分析

为了实现一定气体流速的离子风,设计了一种新型的阵列式三排3 ×3垂直放置的针-柱电极结构放电装置.在针-柱之间间距为3mm、排与排之间间距为8 mm、镇流电阻12 MΩ、放电电阻12 MΩ、测试电阻1 kΩ、大气压环境、室温、无外部通入气流时,阵列式针-柱电极实现了稳定的电晕放电,并通过示波器记录的放电波形、数码相机拍摄的发光图像以及放电伏安特性曲线进行了验证.同时,随着阵列式排数的增加,放电电流变大,离子风风速也随之增大.该针-柱结构易于用MEMS工艺加工制作,可应用于便携式分析仪器中.     

国内BOPP膜生产现状

介绍了国内BOPP薄膜和专用料的生产情况，并提出了建议。     

Exploring single electrode reactions in polymer electrolyte fuel cells

Utilising a pseudo-reference electrode in polymer electrolyte fuel cells allows for the separation of anodic and cathodic contributions to the entire cell impedance. Modelling the impedance responses by using equivalent circuits inhibits the investigation of kinetic parameters of the basic electrochemical reactions, which take place at single electrode-electrolyte interfaces. Therefore, we evaluate single electrode impedance measurements by a kinetic model, which is based on specific reaction pathways, either for the oxygen reduction reaction (ORR) or the hydrogen oxidation reaction (HOR). As a consequence, it is possible to obtain kinetic parameters for the specific reaction of interest. Furthermore, the information gained from the single electrode impedance measurements and the kinetic model can give insight into single reactions steps. In particular, the ORR has to include a chemical step in the reaction pathway.     

Cinétique de dégagement des matières volatiles lors de la pyrolyse d'électrodes de carbone industrielles

In aluminium plants, the anode baking process is associated with an important release of volatile combustible matter. It is the purpose of this study to investigate the kinetics of the evolution of these volatiles. A large thermogravimetry set-up has been designed in such a way that it could simulate real plant conditions. Samples of two distinct masses have been subjected to pyrolysis at different heating regimes. The loss of weight together with the concentrations of the released gases were recorded on a continuous basis during the temperature rise. Kinetic results were found for methane, hydrogen and tar. No variation of the order of reaction with the heating rate was observed, whereas the activation energy and the pre-exponential factor increased. Furthermore, for the range of sample dimensions studied, it was found that the mass of the solid had no significant influence on the kinetic parameters.     

汽车工业生产用热熔胶膜的研制

介绍了汽车工业生产内装饰复合材料用热熔胶膜的性能及其研制状况。这种热熔胶膜具有使用便捷,高效,生产、使用过程中没有污染的具有热熔胶膜的特长。     

基于Delphi的“虚拟胶片打印系统”的技术实现

利用Delphi和VS这两种开发平台,结合Oracle数据库,实现胶片排版、胶片调整、虚拟打印,自助打印、系统管理等功能。重点介绍了系统开发过程中针对特殊问题采用的几种技术。目的是完成胶片的集中打印管理,胶片存储备份,减少开支。