椭圆型偏微分方程的加法Schwarz方法

1.引 言 古典加法Schwarz方法(ASM)对于一般问题收敛很慢,在大多数情况下, ASM只能作为预条件子.另一方面,ASM的并行性能非常好,尤其适合大规模粗粒度并行计算,近年来随着并行机系统及并行计算的兴起,ASM重新受到重视.许多学者研究了怎样提高ASM的收敛速度[1,2,4].他们发现加法Schwarz方法之所以收敛慢是由于在内边界上采用     

Protein binding study of isoflavone, perillyl alcohol and S-ibuprofen by high-performance frontal analysis

High-performance frontal analysis (HPFA) was used for a protein binding study of isoflavones (daidzein, genistin, and genistein), enantiomers of perillyl alcohol and S-ibuprofen to human serum albumin (HSA). The analyses were performed on a Develosil and Inertsil 100-Diol-5 column (10 cm×4.6mm). Sodium phosphate solution (pH 7.4, ionic strength 0.17) was used as the mobile phase at a flow rate of 1 ml/min. To ensure the drug to be eluted as a trapezoidal peak with a plateau, injection volumes were each fixed up the zonal profile with an evident plateau appears. The unbound drug concentration was determined from a plateau height of the plateau region after that experimental data were fitted by Scatchard equation. The binding constants (K) and total binding affinities (nK) of drugs to HSA were calculated, respectively.     

A simple polyol synthesis of silver metal nanopowder of uniform particles

Silver metal has been synthesized in form of a finely divided loose nanopowder, 10–30 nm particle sizes, using a simple polyol process. In hot water, polymer molecules of polyvinyl alcohol (PVA) induce Ag⁺ → Ag reaction as a weak reducer (suitable to control the final particle size), forming a nanofluid of Ag nanoparticles in situ dispersing in part of PVA molecules. Ag nanoparticles do not aggregate much when casting a viscous Ag–PVA nanofluid (hot) onto a substrate in thin laminates or films. Freestanding Ag–PVA films could be obtained of 1–5 mm thickness after drying at room temperature. Dried sample can be easily peeled from a silicate glass substrate. As small as 5–10 mm Ag–PVA pieces were heated in air in order to recollect Ag nanoparticles by burning off the polymer. At 300–400 °C, Ag–PVA disintegrates and encounters combustion in air, resulting in a pure Ag-powder. As analyzed by X-ray diffraction, a single crystalline phase of an Fm3m cubic crystal structure formed. Lattice parameter a = 0.4071 nm and density ρ = 10.61 g/cm³ compare well the bulk values a = 0.4086 nm and ρ = 10.50 g/cm³.     

Effects of thermal and mechanical treatments on a titanium-based conversion coating for aluminium alloys

The influence of mechanical deformation and heating on the protective performance of a chromium-free conversion treatment for aluminium alloys has been assessed by polarisation and AC impedance measurements. Protection is unlikely to be seriously compromised by typical production operations.     

精品光网络建设策略--智能光网络的引入

简要介绍了ASON技术的特点、ASON的引入为新一代光网络带来的好处及衡量网络质量的一些参数和注意事项。     

降低紧密纺色织物浆纱断头的几项措施

为了降低紧密纺色织品种的浆纱断头,提高产品质量,分析了该品种在浆纱过程中产生断头的原因,介绍了在操作方面应采取的措施及在工艺方面应注意的问题.通过适当加大干分绞区张力及前浆槽纱线的喂入张力、预烘张力,单独控制前浆槽的浆液粘度,确保回潮率满足工艺要求,有效解决了紧密纺色织品种浆纱断头问题,提高了织轴质量.     

Frequency domain identification of Wiener models

This paper proposes a frequency domain algorithm for Wiener model identifications based on exploring the fundamental frequency and harmonics generated by the unknown nonlinearity. The convergence of the algorithm is established in the presence of white noise. No a priori knowledge of the structure of the nonlinearity is required and the linear part can be nonparametric.     

Study on Hot Deformation Cracks of Steel D2 Using Procesing Map

ＳｔｕｄｙｏｎＨｏｔＤｅｆｏｒｍａｔｉｏｎＣｒａｃｋｓｏｆＳｔｅｅｌＤ２ＵｓｉｎｇＰｒｏｃｅｓｉｎｇＭａｐＧａｏＳｈａｎ，ＬｉｕＸｉａｎｇｈｕａ，ＷａｎｇＧｕｏｄｏｎｇＡＢＳＴＲＡＣＴＴｈｅｈｏｔｄｅｆｏｒｍａｔｉｏｎｂｅｈａｖｉｏｒｓｏｆｓｔｅｅｌ...     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

国际函件处理信息系统设计

本文试图从系统整体及行业MIS建模方法出发，对国际函件处理信息系统进行了系统设计．在设计中，遵循了对象模板法的开发思想，采用了FoxPro与Excel相结合的技术．所开发出的系统功能较齐全，人权界面友好，具有一定的推广应用价值．