用熵方程证明全不可逆循环揭示的Clausius方程式

利用不可逆循环图代替传统的半不可逆循环推导出Clausius积分式，并用熵方程证明之，得出可逆过程膨胀功大于不可逆过程膨胀功。     

Accurate Depth of Field Simulation in Real Time

We present a new post processing method of simulating depth of field based on accurate calculations of circles of confusion. Compared to previous work, our method derives actual scene depth information directly from the existing depth buffer, requires no specialized rendering passes, and allows easy integration into existing rendering applications. Our implementation uses an adaptive, two‐pass filter, producing a high quality depth of field effect that can be executed entirely on the GPU, taking advantage of the parallelism of modern graphics cards and permitting real time performance when applied to large numbers of pixels.     

Microstructural Modelling of Nb Microalloyed Steels during Thin Slab Direct Rolling Processing

The microstructural evolution during the hot rolling of coarse grain sized austenite has been modeled considering all the microstructural mechanisms (dynamic, static and metadynamic recrystallization, strain induced precipitation) that can take place during an industrial TSDR production of three Nb microalloyed steels. Based on the results obtained from the model, processing maps have been drawn for 0.02%, 0.035% and 0.05% Nb microalloyed steels. Optimum processing conditions to exploit all the benefits of the Nb microalloying have been defined considering a final gauge thickness range between 1.5 and 12.65 mm. In addition, and facing the difficulties present in the production of thick hot strip, several alternative thermomechanical schedules are proposed, which would originate microstructures with a suitable combination of homogeneity and retained strain prior to transformation.     

一种彩色C型显示及数据处理终端

本文介绍了一种利用数字信号处理器ＴＭＳ３２０Ｃ２５用作雷达数据实时处理，利用图形处理器ＴＭＳ３４０１０用作雷达视频图象处理，完成雷达视频图象彩色显示的雷达终端。     

Identification by parameter bounds in adaptive control

Approximate solutions are suggested for receding horizon dual control to guarantee acceptable control performance of a plant with large a priori parameter uncertainties under poor excitation by the output reference and to satisfy the requirement of very fast adaptation using knowledge available on sensor and performance in industrial applications of adaptive control. the aim of the paper is to present several levels of interaction between on-line identification and control performance using parameter bounds. an interesting theorem shows that parameter bounding is a necessary part of the solution of the dual control problem. Starting from the complete separation of identification and control, various approximations are presented at different levels of optimality. Finally, the exact solution of the dual control problem is found for static gain adaptation, which implicitly involves a parameter-bounding identification procedure.     

Robot control and parameter estimation with only joint position measurements

Most adaptive control schemes for rigid robots assume velocities measurements to be available. Although it is possible to measure velocities by using tachometers, this increases costs and the signals delivered may be contaminated with noise. Since the use of encoders allows to read joint position pretty accurately, it is desirable to estimate joint velocities through an observer. This paper presents an adaptive scheme designed in conjunction with a linear observer. Boundedness of the estimated parameters and uniform ultimate boundedness for the tracking and observation errors are guaranteed. Experimental results are included to support the developed theory.     

计算机在热处理工艺编制中的应用

利用计算机强大的数据处理功能 ,对热处理工艺中的各种数据进行记录和处理 ,并制成各种图表 ,掌握其中的各种规律。使热处理工艺的编制不再是一种经验积累式的工作 ,而是依照其规律制定一次合格的规范的热处理工艺卡片 ,并为将来计算机工艺自动生成的工作打下基础     

云纹图象计算机处理技术的进展及其应用

本文对１９８７年至今国内外光测力学条纹图，主要是云纹图象的计算机采集，处理和力学量提取技术的进展进行了回顾，包括利用通用图象处理程序，直接利用灰度，用付利叶变换对条纹图进行分析，引入相移技术提高灵敏度，利用采色编码提取力学量。以及建立在云纹图特点基础上的新的图象处理技术等；分析了它们各自的优缺点，适用范围和存在的问题，讨论了它们在科究和工程测试中的应用前景。     

Uniform modeling of parameter dependent nonlinear systems

This paper addresses the problem of approximating parameter dependent nonlinear systems in a unified framework. This modeling has been presented for the first time in the form of parameter dependent piecewise affine systems. In this model, the matrices and vectors defining piecewise affine systems are affine functions of parameters. Modeling of the system is done based on distinct spaces of state and parameter, and the operating regions are partitioned into the sections that we call ’multiplied simplices’. It is proven that this method of partitioning leads to less complexity of the approximated model compared with the few existing methods for modeling of parameter dependent nonlinear systems. It is also proven that the approximation is continuous for continuous functions and can be arbitrarily close to the original one. Next, the approximation error is calculated for a special class of parameter dependent nonlinear systems. For this class of systems, by solving an optimization problem, the operating regions can be partitioned into the minimum number of hyper-rectangles such that the modeling error does not exceed a specified value. This modeling method can be the first step towards analyzing the parameter dependent nonlinear systems with a uniform method.     

基于AHP的信息系统风险处理评估研究

针对信息系统安全态势评估中风险处理的问题．提出基于AHP分析法的信息安全风险处理评估模型,并运用层次分析法进行风险处理因素权重的计算。研究结果表明．该模型能有效地对信息系统的风险处理提供科学依据。