轮辐翻边成形冲模参数优化

应用有限元成形分析软件，对轮辐翻边成形过程进行了模拟分析，探讨了不同冲模斜角对翻边变形的影响，以控制变形冲力和轮辐变形区应变分布为目标，对冲模斜角参数进行优化。     

产学研紧密合作开发新型相变塑性钢——祝贺上海市金属学会成立50周年

阐述了相变诱发塑性钢的特性及其在先进汽车用钢中的重要作用.举例说明了鞍山钢铁公司和上海大学在产学研结合的模式下成功进行了不同等级相变塑性钢的研发.     

烟草加工生产线总体布局的计算机辅助设计

以AutoCAD为系统平台 ,综合运用VisualBasic6.0高级计算机语言进行软件开发 ,实现烟草加工生产线总体布局的计算机辅助设计。     

Cr3Si／Crl3Ni5Si2金属间化合物合金组织与高温滑动磨损性能的研究

利用水冷铜模激光熔炼炉制得了由初生枝晶Cr3Si和枝晶间Cr3Si／Crl3Ni5Si2共晶组成的金属间化合物合金。利用OM，SEM，TEM，EDS和XRD分析了该金属间化合物的显微组织，在400℃，500℃和600℃条件下测试了其耐磨性能。结果表明，由于Cr3Si和Crl3NisSi2硬度高、原子键合力强、组织细小、均匀，在高温滑动磨损条件下具有优良的耐磨性能。     

Case Depth Measurement of Induction Hardening Using Image Processing

INDUCTION HARDENING of medium carbon steel iswidely used to produce automotive parts,agriculturalequipment and other machines.Inductor with highfrequency electric current was used as a heater totransform microstructure of steel surface into Austenite.Then water was sprayed on the heated steel.Austenitetransformed into Martensite.Area of microstructuralchange was considered to be case depth that was animportant parameter to be controlled in productionprocess.The standard procedure to de…     

焦炭高温反应炉温度控制系统的改进

介绍了焦炭高温反应炉的温控工艺及程控曲线，给出了程控曲线的控制结构、主回路以及实现多套PI参数控制的方法。     

聚碳酸酯的吹塑成型

简介聚碳酸酯吹塑容器的特性与用途,着重分析其吹塑(包括挤出吹塑、共挤吹塑和注射吹塑)成型的机械(螺杆、机筒、型坯机头与吹塑模具)设计要点及工艺条件。     

Ozone Contribution in Food Industry in Japan

Ozone has the strongest oxidization effect after fluorine, and this property has been used in sterilization for food and processing plants in Japan. Moreover, there is no fear of toxic residues as with chlorine-based sterilizers and no hazardous trihalomethanes are formed. Based on these advantages, ozone has been used in water and air treatment for food products food materials and food processing plants. Use in the food processing is now increasing in Japan. This paper describes ozone sterilization, introducing sterilization systems and equipment applied to food in Japan.     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

Adaptive tracking control of leader–follower systems with unknown dynamics and partial measurements

In this paper, a decentralized adaptive tracking control is developed for a second-order leader–follower system with unknown dynamics and relative position measurements. Linearly parameterized models are used to describe the unknown dynamics of a self-active leader and all followers. A new distributed system is obtained by using the relative position and velocity measurements as the state variables. By only using the relative position measurements, a dynamic output–feedback tracking control together with decentralized adaptive laws is designed for each follower. At the same time, the stability of the tracking error system and the parameter convergence are analyzed with the help of a common Lyapunov function method. Some simulation results are presented to validate the proposed adaptive tracking control.