影响单丝牌号5000S产品质量的因素分析

单丝牌号5000S是大庆HDPE装置的主要产品,适用于加工渔网丝、编织袋等产品。作者们讨论了产品的物性参数特点,分析了以往产品质量存在的主要问题。从工艺技术方面对于如何提高5000S产品的优级品率,提高产品的加工性能和使用性能进行了讨论。     

生产电缆护套料存在的问题探讨

介绍生产电缆护套料所用F催化剂的性能，分析以往大庆线性低密度聚乙烯装置多次开发失败的原因及成功经验，对生产过程中存在的问题进行讨论。确定生产电缆护套料DFDA-7540最佳控制措施，为同类装置生产提供技术指导。     

Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media

In recent years there have been many reported cases of corrosion failure in cement concrete pipelines. In the majority of cases, the failures have been attributed to rebar corrosion which is caused by the permeability of chloride from low resistivity soil and subsequent attack on a passive layer on an iron bar in the structure. As a possible alternative to cementitious materials, some organic coatings based on olefin, vinyl or epoxy-based polymers have been considered. However, due to a paucity of data on the behavior of these coatings in aqueous media— particularly product water—the possibility of their application in water transmission systems in the Kingdom has not been fully exploited. This paper deals with the studies carried out on the corrosion and mechanical behavior of fusion bonded epoxy (FBE) coating on steel in aqueous media which include product water, distilled water and saline water. The mechanical testings on coating include adhesion, bending and cathodic disbondment testings. The corrosion studies include immersion testing under static and dynamic conditions, autoclave tests and accelerated (salt-fog) tests. The analysis of results indicates chemical inertness of FBE coating in either of the aforementioned water used during testing, good adhesion and no damage to the coating during bending. Cathodic disbondment tests indicate that FBE coating sustains under cathodic protection (CP) conditions. In general, the results of mechanical and corrosion tests indicate that FBE is a promising material for internal coating on steel in water transmission systems.     

基于情感计算的商品评论分析系统

针对电子商务中的商品评论信息过载问题,运用情感计算理论,通过挖掘商品评论信息中的商品特征及相应的情感褒贬态度,为消费者提供一个商品特征粒度上的情感分析结果,从而帮助消费者从庞杂的商品评论中快速获取有效信息。系统首先采集指定商品的评论集并挖掘商品特征,然后结合情感语料库和词汇相似度计算,利用依存关系找到特征-极性词对以及程度副词和否定词。基于以上结果,考虑程度副词的强度,以及程度副词和否定词共现语序不同造成的语义差异,提出了商品评论情感倾向程度的计算方式。最后,进行系统实现并验证算法的有效性。实验结果表明,系统具有良好的应用效果。     

Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder Preparation

This work investigates the performance of a spray dryer for tomato powder preparation by spray drying of tomato pulp. Samples of tomato pulp with a 14% constant total solids concentration were used, and a pilot scale spray dryer (Buchi, B-191) with cocurrent operation and a two-fluid nozzle atomizer was employed for the spray drying process. Twenty-four different experiments were conducted keeping constant the feed rate, the feed temperature, and the atomizer pressure, and varying the compressed air flow rate, the flow rate of drying rate, and the air inlet temperature. In each experiment the air outlet temperature was recorded. Data for the residue remaining in the chamber and cyclone walls was gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Analysis of experimental data yielded correlations between residue accumulation and the variable operating conditions. The same operating parameters had a great influence on the air outlet temperature whereas temperature deviations were observed comparing measured air outlet temperatures with corresponding outlet adiabatic saturation temperatures.     

CAE技术在解决胶带座注塑缺陷中的应用

介绍了CAE技术在注塑产品生产中的应用。针对胶带座在注塑成型过程中产生的缺陷，借助CAE软件验证了产生缺陷的位置，找出了产生缺陷的原因。并在工艺、模具和产品设计上进行了修改，从而解决了实际生产中遇到的问题，为实际生产提供了指导。     

Effect of different oxygen species originating from the dissociation of O2, N2O and NO on the selectivity of the Pt-catalysed NH3 oxidation

An effect of oxygen species formed from O₂, N₂O and NO on the selectivity of the catalytic oxidation of ammonia was studied over a polycrystalline Pt catalyst using the temporal analysis of products (TAP) reactor. The transient experiments were performed in the temperature range between 773 and 1073 K in a sequential pulse mode with a time interval of 0.2 s between the pulses of the oxidant (O₂, N₂O and NO) and NH₃. In contrast to adsorbed oxygen species formed from NO, those from O₂ and N₂O reacted with ammonia yielding NO. It is suggested that the difference between these oxidising agents may be related to the different active sites for dissociation of O₂, N₂O and NO, where oxygen species of various Pt-O strength are formed. Weaker bound oxygen species, which are active for NO formation, originate from O₂ and N₂O rather than from NO. These species may be of bi-atomic nature.     

基于欧氏距离及向量内积的骨架提取算法

对骨架算法进行研究,提出一种骨架提取算法.通过对图像内部像素点进行距离变换得到其最近边界点的位置,将内部像素点到最近边界点的向量定义为边界向量,根据物体内部相邻边界向量的方向,计算每个像素点的内积值和其8邻域的最小内积值,得到的最小内积点,以确定的阈值从最小内积点中选取骨架种子点,再对骨架种子点进行处理,得到连通的骨架.试验证明这种算法能保证骨架具的完整性和连通性,正确反映物体的拓扑结构.     

A systematic data-mining-based methodology for product family design and product configuration

Product family design and product configuration based on data mining technology is identified as an intelligent and automated means to improve the efficiency of product development. However, few of previous literatures have proposed systematic product family design method based on data mining technology. To make up for this deficiency, this research put forward a systematic data-mining-based method for product family design and product configuration. First, the customer requirement information and product engineering information in the historical order are formatted into structural data. Second, principal component analysis is performed on historical orders to extract the customers' differentiated needs. Third, association rule algorithm is introduced to mine the rules between differentiated needs and module instances in the historical orders, thus obtained the configuration knowledge between customer needs and product engineer. Forth, the mined rules are used to construct association rule-based classifier (CBA) that is employed to sort out the best product configuration schemes as popular product variants. Fifth, sequence alignment technique is employed to identify modules for popular product variants, so that the module instances are divided into optional, common and special module, respectively, thereby the product platform is generated based on common modules. Finally, according to new customer needs, the CBA classifier is used to recommend the best configuration schemes, and then popular product variants are configured based on the product platform. The feasibility of the proposed method is demonstrated by the product family design example of desktop computer hosts.