信息化装备的RMS对任务效能的影响分析

指挥信息系统的任务效能与其信息化装备的可靠性、维修性和保降性(RMS)密切相关.将指挥信息系统的任务效能指标分解到组成的信息化装备上,从而能够确定信息化装备的保障要求.分析信息化装备的RMS对其任务效能的影响,为权衡信息化装备的任务效能与保障资源的预计提供科学依据.     

一种面向可重构制造系统的过程诊断技术研究

过程诊断技术保证了可重构制造系统在运行过程中具有良好的缺陷和故障诊断能力。本文论述了一种可重构制造系统过程诊断技术的原理和总体设计方案，详细讨论了其中的数据记录与处理、相关性分析、分组分析和相关系数矩阵特征分析等关键技术；提出了应用计算机实现可重构制造系统过程诊断的解决方案。     

面向可重构制造系统的生产资源信息管理系统

针对可重构制造系统的特征和研究内容,结合企业实际,建立了基于可重构制造单元的系统级可重构制造系统的生产资源信息模型,并将其应用于面向可重构制造系统的生产资源信息管理系统中,进而实现对生产资源的有效管理。     

工程振动多振源叠加分析

为了解决工业建筑中的振动影响,有必要清楚地了解振动荷载条件。特别是对于多振源振动荷载叠加问题,需要建立合理的振动合成方法。考虑多振源振动相遇时具有的随机特性,依据《建筑结构可靠度设计统一标准》对荷载效应的技术要求,提出一种简单、合理、有效的＂等效幅值公式＂,并与＂茅氏公式＂进行比较。论文提出的等效幅值公式对工程应用具有更广泛的指导意义。     

与P—SV转换波和横波有关的几个速度参数

针对P—SV转换波资料的特点,基于水平层状介质模型,从"深度唯一"的法则出发,定义和推导了P—SV转换波资料解释中使用的若干速度参数,介绍了一种根据质量好的纵波与P—SV转换波资料求取横波速度信息的方法并验证了其实际计算效果。     

海上时移地震中潮汐校正应用研究

时移地震中两次地震资料采集时间不同,记录的潮汐量不同,导致两次资料中出现一定时差,并且采集资料时基准面不统一,所以时移地震资料处理中潮汐校正成为必要环节。本文介绍一种时移地震中基于潮位值预测的潮汐校正方法,并采用水深数据快速检验该方法计算潮汐量的合理性,也引入非一致性值作为质控两次资料潮汐校正效果的定量化参数。此外,也通过对比校正前后地震剖面,验证了该潮汐校正方法的可靠性,说明该方法实用价值高。     

Velocity calibration for microseismic event location using surface data

Because surface-based monitoring of hydraulic fracturing is not restricted by borehole geometry or the difficulties in maintaining subsurface equipment, it is becoming an increasingly common part of microseismic monitoring. The ability to determine an accurate velocity model for the monitored area directly affects the accuracy of microseismic event locations. However, velocity model calibration for location with surface instruments is difficult for several reasons: well log measurements are often inaccurate or incomplete, yielding intractable models; origin times of perforation shots are not always accurate; and the non-uniqueness of velocity models obtained by inversion becomes especially problematic when only perforation shots are used. In this paper, we propose a new approach to overcome these limitations. We establish an initial velocity model from well logging data, and then use the root mean square (RMS) error of double-difference arrival times as a proxy measure for the misfit between the well log velocity model and the true velocity structure of the medium. Double-difference RMS errors are reduced by using a very fast simulated annealing for model perturbance, and a sample set of double-difference RMS errors is then selected to determine an empirical threshold. This threshold value is set near the minimum RMS of the selected samples, and an appropriate number of travel times within the threshold range are chosen. The corresponding velocity models are then used to relocate the perforation-shot. We use the velocity model with the smallest relative location errors as the basis for microseismic location. Numerical analysis with exact input velocity models shows that although large differences exist between the calculated and true velocity models, perforation shots can still be located to their actual positions with the proposed technique; the location inaccuracy of the perforation is <2 m. Further tests on field data demonstrate the validity of this technique.     

基于静校正模型的速度场基准面转换方法

本文从基准面静校正技术和CMP参考面的定义出发,对速度场从CMP参考面转换至统一基准面存在的问题进行了深入研究,获得了静校正模型中高速顶界面或中间参考面在时间域和深度域均具有确切定义的认识,提出并实现了从CMP参考面至高速顶界面或中间参考面的介质剥离,从高速顶界面或中间参考面至统一基准面的常速介质充填的速度场基准面转换方法,较好地解决了速度场从CMP参考面到统一基准面的转换问题,为充分利用地震速度信息建立时深转换速度场奠定了基础。该方法具备明确的物理意义,所获得的统一基准面速度具有较高的时深转换精度,在鄂尔多斯盆地东缘煤层气新探区取得了良好的应用效果。     

琼东南盆地中央峡谷西段充填体系沉积演化与砂体分布

依据三维地震资料和钻井资料,通过分析地震剖面反射特征和均方根振幅属性,对琼东南盆地中央峡谷充填体系西段沉积演化和砂体分布进行了研究。结果表明:①中央峡谷主要充填时期为距今5.5~1.8Ma,可划分为三个阶段,分别为峡谷轴向充填期(LST30)、低弯度水道发育期(LST29)和块状搬运复合体沉积(MTCs)充填期(LST28和LST27);②峡谷充填体系主要受峡谷走向物源、海南岛物源和峡谷南部物源控制,并在峡谷充填过程中呈现单-物源与双物源相互转化的复杂变化过程;③中央峡谷西段发育峡谷轴向充填砂体、水道砂体、朵叶状砂体以及堤岸砂体,其中峡谷轴向充填砂体主要分布于LST30之内,水道砂体在研究区东部发育于LST30晚期,并在LST29时期最为发育,朵状砂体发育于LST29,主要集中分布于研究区的东部,堤岸砂体主要发育于LST30晚期水道沉积的两侧;④峡谷轴向充填砂体、朵叶状砂体以及堤岸砂体分布较广,可作为该区的有利储层。     

Improve uniformity for an indoor visible light communication system

Visible light communication (VLC) is an alternative technology to the radio frequency (RF) for different applications in the indoor and outdoor environments, it could be utilized for illumination and communication simultaneously, and it offers several advantages over contemporary RF technologies such as low power consumption, free license, large bandwidth, and being friendly to the environment. In this paper, an indoor VLC system uniformity improvement in terms of high received power, signal‐to‐noise ratio (SNR), and bit rate, with RMS delay spread reduction, is proposed. It features a novel model that utilizes a 13‐optical attocells configuration on the ceiling. Moreover, proposed model was evaluated at different semi‐angle at half power. The average received power and SNR were improved to 2.85 dBm and 75.5 dB, while achieved received power and SNR levels at the center of the room were 4.92 dBm and 79.5 dB, respectively. A minimum average RMS delay spread of 0.4749 nanoseconds is obtained, while the highest average bit rate calculated is 211 Mb/s. The proposed model provides a better communication quality and meets illumination standards requirements.