次氯酸钠水溶液稳定性的研究及应用

对次氯酸钠(NaClO)水溶液的稳定性进行了试验观察，经过对次氯酸钠水溶液有效氯含量的测定，提出了保持次氯酸钠溶液稳定性的一些应用方法。     

提高次氯酸钠溶液稳定性

通过次氯酸钠溶液有效氯含量的测定，对次氯酸钠溶液的稳定性进行了初步分析探讨，提出了一些应对措施。     

从481—2B型废催化剂中回收钼工艺述评

钼酸铵是一种主要的化工原料，本文对从工业生产的废催化剂中回收钼的工艺进行了比较系统的概括，对各种工艺进行了比较，并给出了最佳的工艺条件。     

利用金属钠制备甲醇钠的生产工艺

介绍了甲醇钠的合成方法、理化性质以及安全保护应该注意的问题。研究了用金属钠制备液体甲醇钠的生产工艺，建立了生产工艺流程。用该工艺制备的甲醇钠溶液的产率达到98％以上，游离碱含量小于0．5％，产品可满足制药行业的特殊需要，它比传统氢氧化钠制取甲醇钠有明显的技术性能优势。同时也对甲醇钠的测定方法进行了深入研究，建立了一种准确、可靠的分析甲醇钠的方法。     

不同改良剂对不同含砂率粉土改良性质研究

通过人工室内配制不同含砂率(10%、20%、40%)粉土,对其进行改良试验,研究在不同改良剂(石灰+水玻璃、石灰+粉煤灰)、不同配比作用下3种含砂率粉土的改良效果,研究结果表明:随着含砂率的增加,无论是素土还是改良土,其最大干密度均增大;对于石灰+水玻璃改良土,其最大干密度较素土有明显的降低,而石灰+粉煤灰改良土与之相反;石灰+水玻璃改良土最优含水率与素土略有差别,而石灰+粉煤灰改良土与素土最优含水率基本一致;在同一含砂率下,对于不同配比的石灰+水玻璃改良土,其最大压实度和最优含水率并未发生较大变化,10%石灰+20%粉煤灰的压实度高于其他配比情况;在恒定压实度(95%)下,改良土的无侧限抗压强度明显高于素土的无侧限抗压强度,改良剂对粉土起到一定的"维稳"效果,改良剂掺量才是决定无侧限抗压强度的关键因素。     

Investigation into the flotation response of refractory molybdenum ore to depressant mixtures:A case study

In this paper, bulk flotation followed by separation was investigated to concentrate purified molybdenite product from Jinduicheng molybdenum ores(Shanxi province, China). The bench scale tests mainly focussed on separation of molybdenite from other sulfide minerals using the new type of depressants.The effect of each single depressant, including organic depressant-modified dextrin(MD), P-Nokes reagent(PN) and sodium trithiocarbonate(ST), and their mixtures on galena, chalcopyrite and other sulfide ores, was examined in turn by changing the concentrations used in cleaner flotation tests. Closed circuit experiments were carried out under the optimal condition and satisfying recovery and grade of molybdenite concentrate could be achieved(86.294% and 53.157%, respectively). A potential reagent regime was developed, with more environmental friendly and more economical advantages due to the introduction of modified dextrin.     

Development of sodium hybrid quasi-solid electrolytes based on porous NASICON and ionic liquids

Lithium-ion batteries are currently the alternative of choice to overcome the increasing demand of energy. However, besides the scarcity of lithium and limited geolocation, it is believed that such batteries have already reached their maximum maturity. Sodium batteries emerge as an alternative to produce the new, so called, post-lithium batteries. In this study, we explore (i) the effect of sodium content and sintering temperature in solid electrolytes based in NASICON-type compounds and (ii) the use of two methodologies to obtain porous NASICON samples: application of natural substances and organic materials as pore-formers and freeze casting. The main purpose is the attainment of hybrid quasi-solid state electrolytes, with enhanced room temperature conductivity, based on porous ceramic electrolyte layers infiltrated with ionic liquids. Using this approach, porous samples with different microstructure and porous morphology and distribution were achieved, providing an enhancement in conductivity (ranging from 0.45 to 0.96 mS cm⁻¹ at 30 °C) of one order of magnitude for infiltrated samples respect to pore-free samples. According to these results the porous NASICON might be considered as a functional macroporous inorganic separator that can act as a Na⁺ reservoir.     

精密铸造4种制壳工艺特点分析及改进方向探讨

对目前国内精铸行业中广泛应用的4种制壳工艺的特点进行了分析对比。从精铸件质量比较，水玻璃型壳较差，复合型壳、硅溶胶-低温蜡型壳次之，硅溶胶-中温蜡型壳最好。而从制壳成本比较，水玻璃型壳最低，硅溶胶-中温蜡型壳最高。对这4种制壳工艺分别提出了改进措施。     

工艺参数对微波硬化水玻璃砂溃散性影响的试验研究

采用微波加热技术硬化水玻璃砂,用电阻炉加热模拟型芯在铸造过程中的受热情况,测试砂型试样的溃散性,分析水玻璃加入量和水玻璃模数对微波硬化水玻璃砂残留强度的影响规律。结果表明,在微波加热功率为539 W、微波加热时间为20 min、电阻炉中保温时间为10 min的条件下,当水玻璃加入量在5.0%~2.0%范围内,每下降1.0%时,砂型试样的残留强度平均值下降约5.0%;水玻璃的模数由2.3增加到2.5时,砂型的残留强度平均值有所降低。采用微波加热新工艺提高了水玻璃的粘接效率,降低了水玻璃的加入量,改善了水玻璃砂的溃散性。     

烷基磺酸钠型砂的质量控制

介绍了控制烷基磺酸钠型砂的混砂工艺、配制要点及保存使用等控制要点，并就实际生产中可能出现的一些问题作了探讨，提出了解决的办法。