改性高岭土上甲苯的选择性硝化(IV)

应用Ｍｅｎｋｅ条件，在改性高岭土固体酸催化下，甲苯能被浓硝酸对位选择性硝化，表现在对邻硝化产物比例达到１．５。     

Interplay Between Wetting and Phase Behavior in Binary Polymer Films and Wedges: Monte Carlo Simulations and Mean Field Calculations

Confining a binary mixture, one can profoundly alter its miscibility behavior. The qualitative features of miscibility in confined geometry are ratheruniversal and shared by polymer mixtures as well as small molecules, but the unmixing transition in the bulk and the wetting transition are typically well separated in polymer blends. The interplay between wetting and miscibility of a symmetric polymer mixture via large-scale Monte Carlo simulations in the framework of the bond fluctuation model and via numerical self–consistent field calculations is studied. The film surfaces interact with the monomers via short ranged potentials, and the wetting transition of the semi–infinite system is of first order. It can be accurately located in the simulations by measuring the surface and interface tensions and using Young’s equation. If both surfaces in a film attract the same component, capillary condensation occurs and the critical point is close to the critical point of the bulk. If surfaces attract different components, an interface localization/delocalization occurs which gives rise to phase diagrams with two critical points in the vicinity of the pre-wetting critical point of the semi–infinite system. The crossover between these two types of phase diagrams as a function of the surface field asymmetry is studied. The dependence of the phase diagram on the film thickness Δ for antisymmetric surface fields is investigated. Upon decreasing the film thickness, the two critical points approach the symmetry axis of the phase diagram, and below a certain thickness Δ_tri, there remains only a single critical point at the symmetric composition. This corresponds to a second-order interface localization/delocalization transition even though the wetting transition is of first order. At a specific film thickness, Δ_tri, tricritical behavior is found. The behavior of antisymmetric films is compared with the phase behavior in an antisymmetric double wedge. While the former is the analog of the wetting transition of a planar surface, the latter is related to the filling behavior of a single wedge. Evidence for a second-order interface localization/delocalization transition in an antisymmetric double wedge is presented, and its unconventional critical behavior is related to the predictions of Parry et al. (Phys. Rev. Lett. 83:5535 (1999)) for wedge filling. The critical behavior differs from the Ising universality class and is characterized by strong anisotropic fluctuations.Invited paper presented at the Fifteenth Symposium on Thermophysical Properties, June 022–27, 2003, Boulder, Colorado, U.S.A.     

ITO粉的Rietveld全谱图拟合定量相分析

对ITO粉样品用Rietveld全谱图拟合法进行了定量相分析，该样品由立方晶型的In2O3和少量的四方晶系的SnO2所组成。In2O3和SnO2质量百分含量分别为94．23％和5．77％。结果表明，用Rietveld法进行了定量相分析是非常有效和准确的。     

A coaxial pulsed plasma thruster using chemical propellants

Pulsed plasma thrusters (PPTs) have the advantages of mechanical simplicity and robustness compared to other electric propulsion systems. However the thrust power ratio of PPTs is lower than that of other electric propulsion systems. To enhance the thrust performance of the PPT, we propose to use several combustible solid chemicals as coaxial PPT propellants to replace Teflon^® (Polytetrafluoroethylene: PTFE). With the design, the force obtained thermodynamically is expected to augment the PPT thrust power ratio with the help of the chemical energy contained in the propellants. As a result, the thrust power ratio is increased using hydroxyl-terminated polybutadiene-ammonium perchlorate (HTPB-AP)-based propellants compared to the case of ordinary Teflon. The discharge current and voltage waveform does not change even when the propellant is changed. These findings could indicate that the impulse bits by gasdynamic contribution are lager in the case of chemical solid propellants than in the case of Teflon.     

Preparation of SnO2 whiskers via the decomposition of tin oxalate

A new method for preparing SnO₂ whiskers by the decomposition of SnC₂O₄ is suggested. A Whisker-like morphology of a SnC₂O₄ precipitate was attained via the gradual addition of an oxalic acid solution to a hot SnCl₂ aqueous solution (T > 50^∘C). In comparison, when the solution temperature was either lower than 50^∘C or when ethanol was used as the solvent, the SnC₂O₄ precipitate showed an angular and relatively isotropic morphology. The morphology of the SnC₂O₄ precipitate remained even after its thermal decomposition into SnO₂ at 400^∘C indicating that SnC₂O₄ precipitation is a key step in preparing the whiskers. The formation mechanism of SnO₂ whiskers was explained by the supersaturation during the precipitation of SnC₂O₄.     

UPS并机数字锁相误差分析

针对不间断电源(UPS)并联系统同步问题,进行锁相误差分析,并探讨了减少锁相误差的措施和方案。通过在两台30kVA样机上进行并联实验,验证了方案的正确性。     

Nanoluminograph — A New Generation of Measuring Instruments

A nanoluminescent device, or nanoluminograph, has been developed, created, and patented. By means of the device, unique information about the physicochemical properties of surface and near-surface layers of solids and ultrathin coatings of thickness less than 0.4 μm may be obtained. There is also the hope of decreasing the thickness of the subject layer with further development of the detecting component of the device. __________ Translated from Izmeritel'naya Tekhnika, No. 8, pp. 28–31, August, 2005.     

显微组织对ZIRLO锆合金耐腐蚀性的影响

将ZIRLO锆合金样品分别进行1000℃-0.5h／560℃-10h、1000℃-0.5h／冷轧／560℃-10h和750℃-0.5h、750℃-0.5h/560℃-10h、750℃-0.5h／冷轧／560℃-10h的不同处理。用透射电镜观察了它们的显微组织，将它们放入高压釜中，研究了在350℃，16.8MP,0.04M LiOH水溶液中的耐腐蚀性能，结果表明，在本文所有的变形及热处理条件下中，750℃-0.5/冷轧／560℃-10h处理后样品的耐腐蚀性能最好，其原因在于样品经过这样处理后，基体αZr中固溶的Nb含量较低，并获得了纳米尺寸分布的βNb(含Fe)第二相粒子，后者对改善耐腐蚀性能尤为重要。样品在最终560℃加热处理之前的冷轧变形，可以促进βZr分解时的形核，是获得纳米尺寸βNb的必要措施。