旋转固体火箭发动机统一流场计算

为了进一步研究旋转对固体火箭发动机工作的影响,采用RSM湍流模型对内孔燃烧、内孔与端面同时燃烧管状装药旋转固体火箭发动机统一流场进行了仿真。采用UDF编程给出质量入口边界,获得了旋转条件下发动机内流场结构参数特点,并给予理论说明。计算结果表明,内孔燃烧装药发动机切向速度流场类似于典型的Rankine涡,端面和内孔同时燃烧装药发动机切向速度流场呈现出Rankine涡和由端面燃烧引起的强迫涡的复杂组合涡;在发动机前封头和喷管喉部涡核切向速度峰值非常大,使燃烧室前封头和喷管喉部工作环境显著恶化;旋转使发动机燃烧室压力沿径向逐渐增大,强迫涡附近的压力梯度远大于推进剂表面的压力梯度。     

Investigation into the morphological and mechanical properties of date palm fiber-reinforced epoxy structural composites

This study aims to examine the morphology and mechanical properties (tensile, flexural, and compressive) of epoxy composites reinforced with epoxy date palm leaves (EDPL), epoxy date palm branch (EDPB), and epoxy/hardener date palm core shell (EDPC) fibers (particle size <1 μm depend on the date palm fibers). A three-step technique was used to obtain the composites. The EDPL composites showed a maximum tensile strength of 3.45 MPa, while the EDPB composites showed maximum compressive and flexural rigidity of 9.46 and 5.55 MPa, respectively, owing to the good compatibility of fiber-matrix bonding. In this work, epoxy composites reinforced with date palm fibers (DPF) leaves, branches, and core shell were recycled using a cost-effective and easily reproducible three-step technique. EDPC fibers fabricated with 64.65% weight carbon fibers content demonstrated improved tensile strengths and stiffness properties. The three samples of palm date composites revealed mechanical properties that could be used to trial these fibers for manufacturing purposes, and to exploit their extraordinary mechanical properties shown in current results.     

基于离散单元法的锥形双螺杆输送及混合机理分析

锥形双螺杆挤出机结构模型与其他普通螺杆挤出机相差很大且构成独特,近年来在聚合物加工行业中发挥了很大的作用。设计螺槽深度与螺杆半径比为1∶2、2∶5、1∶3的三种锥形双螺杆挤出机,通过离散单元法模拟了锥形双螺杆挤出机挤出LDPE、HDPE两种颗粒的过程,分析了锥形双螺杆挤出机螺槽内颗粒速度的变化,同时在不同参数下对三种锥形双螺杆挤出机的输送效率进行了比较。利用EDEM软件对LDPE和HDPE颗粒进行离散元分析,得出不同时刻两种颗粒在三种锥形双螺杆挤出机内的混合情况。结果表明,螺槽深度与螺杆半径比为1∶2的锥形双螺杆挤出机的混合效率优于螺槽深度与螺杆半径比为2∶5、1∶3的锥形双螺杆挤出机。     

Perm-Inspired High-Performance Soy Protein Isolate and Chicken Feather Keratin-Based Wood Adhesive without External Crosslinker

Crosslinking modification can effectively improve the water resistance of soy protein isolate (SPI) adhesive, but it often depends on petroleum-based reagents, violating the concept of green environmental protection. Here, inspired by the breaking and recombination of the disulfide bond in the perm process, a high-performance wood adhesive is prepared by incorporation of SPI (modified by sodium sulfite to cleave the disulfide bonds of protein chains) and feather keratin (FK, extracted from waste chicken feathers by breaking the disulfide bond) without using any other crosslinkers. The crosslinking reaction occurs by disulfide bonds derived from the sulfhydryl group of FK and SPI. Thus the wet shear strength of the SPI/FK-20 adhesive is improved from 0.57 to 1.18 MPa, an increment of 107%. This study provides a green strategy to prepare high-performance protein-based adhesive from the waste products-chicken feathers, which will contribute to the development of the environmentally friendly wood adhesive industry.     

固体火焰与燃烧合成的基本概念及应用

对固体火焰与燃烧合成的基本概念与应用进行了综合评述，尽可能对固体火焰与气体火焰的特点进行比较，并对燃烧合成与其它传统工艺进行了比较。     

模具装配过程的动态模拟及其应用

运用动画模拟软件Solid Works Animator制作了模具装配过程的动画。对于结构比较复杂的模具，实现模其装配过程的动态模拟可以更好地展示模具的内部结构，有助于客户直观感受模具设计模型，从而进一步完善模具设计，而且可以将此动画过程录制成AVI格式动画文件，从而能够在任何基于Windows的媒体播放器中进行播放，同时还可以将此动画应用于多媒体教学当中。     

Sensing, modeling and control for laser-based additive manufacturing

Laser-Based Additive Manufacturing (LBAM) is a promising manufacturing technology that can be widely applied to part preparation, surface modification, and Solid Freeform Fabrication (SFF). A large number of parameters govern the LBAM process. These parameters are sensitive to the environmental variations, and they also influence each other. This paper introduces the research work in RCAM on improving the performance of the LBAM process. Metal powder delivery real-time sensing and control is studied to achieve a controllable powder delivery for fabrication of functionally graded material. A closed-loop control system based on infrared image sensing is built for control of the heat input and size of the molten pool in the LBAM process. The closed-loop control results show a great improvement in the geometrical accuracy of the built features. A three-dimensional finite element model is also established to explore the thermal behavior of the molten pool in the closed-loop controlled LBAM process.     

环保型木器涂料

介绍水性和紫外光固化两类环保型木器涂料及其研究进展。水性木器涂料主要为丙烯酸酯与聚氨酯两大类，其研究进展集中表现为乳液改性，包括自交联、共混共聚、微乳液等；紫外光固化木器涂料包括其光固化树脂、活性稀释剂和光引发剂的功能及进展；指出研究新型乳液以提高水性木器涂料涂膜的表面性能，开发新型原材料以降低紫外光固化木器涂料的成本、扩大适应范围将成为今后环保型木器涂料的研究重点。     

木材用交联型醋丙胶粘剂的研制

研制一种由醋酸乙烯、丙烯酸丁酯、特种单体共聚而成的水性交联型环保胶粘剂以替代目前广泛使用的氨基树脂,适应绿色环保要求。     

Copolymerization in UF/pMDI adhesives networks

Kinetic evidence in thermomechanical analysis experiments and carbon‐13 nuclear magnetic resonance spectroscopy (¹³C NMR) evidence indicates that the strength of a joint bonded with UF (urea–formaldehyde)/polymeric 4,4'‐diphenylmethane diisocyanate (pMDI) glue mixes is improved by coreaction of the methylol groups of UF resins with pMDI to form a certain number of methylene cross‐links. The formation of these methylene cross‐links is predominant, rather than formation of urethane bridges which still appear to form but which are in great minority. This reaction occurs in presence of water and under the predominantly acid hardening conditions, which is characteristic of aminoplastic resins (thus, in presence of a hardener). Coreaction occurs to a much lesser extent under alkaline conditions (hence, without UF resins hardeners). The predominant reaction is then different in UF/pMDI adhesive systems than that observed in phenol‐formaldehyde (PF)/pMDI adhesive systems. The same reaction observed for UF/pMDI system at higher temperatures has also been observed in PF/pMDI systems, but only at lower temperatures. The water introduced in the UF/pMDI mix by addition of the UF resin solution has been shown not to react with pMDI to an extent such as to contribute much, if at all, to the increase in strength of the hardened adhesive. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3681–3688, 2002