TEMPO/NaBr/NaClO体系氧化玉米淀粉的研究

针对以2,2,6,6-四甲基哌啶-1-氧基自由基（TEMPO）-NaClO-NaBr为代表的亚硝酰自由基选择性氧化体系,本文以玉米淀粉为原料,NaClO为氧化剂,TEMPO和NaBr为催化剂,制备了氧化玉米淀粉.在不糊化的前提下,以5 g淀粉为原料,研究了在pH为10.00,反应温度为20℃,反应时间为2.5h的条件下,不同氧化剂用量对氧化淀粉羧基质量分数的影响,通过红外光谱（IR）对氧化玉米淀粉的结构进行表征,研究结果表明,当NaClO用量为67.5 mL时,氧化淀粉的羧基质量分数可达10.60％.该研究为TEMPO/NaBr/NaClO体系氧化淀粉提供了理论参考.     

Laccase/TEMPO-modified lignin improved soy-protein-based adhesives: Adhesion performance and properties

The aim of this study was to enhance the water resistance of soy protein (SP) adhesives using laccase/TEMPO-modified lignin. Kraft lignin was depolymerized by laccase enzyme in the presence of TEMPO to expand the oxidation reaction of both phenolic and non-phenolic compounds. This simplified process has the distinct advantage of enhancing lignin-protein interaction. Compared with SP adhesives, lignin-protein adhesives showed a stronger elastic modulus, higher thermal stability, and increased wet adhesion performance. Wet shear strength increased by 106% from 0.693 to 1.429 MPa, and partial wood failure was observed after the test. Better performance was also observed in the three-cycle soaking test. At the same time, the stronger interactions between -COO^- and -NH₂ groups of protein and lignin led to a decrease in flowability and spreadability.     

Study on the spin probe‐added polymeric dense membranes by 13C solid‐state nuclear magnetic resonance spectroscopy

This article is a duplicate of an article previously published in the Journal of Applied Polymer Science, Vol. 99, No. 6, March 15, 2006, pp. 3062‐3069 http://doi.wiley.com/10.1002/app.22908 . We regret any inconvenience this may have caused.     

Syntheses and characterizations of the multiple morphologies formed by the self-assembly of the semicrystalline P4VP-b-PCL diblock copolymers

A series of semicrystalline diblock copolymers of poly(4-vinylpyridine-b-?-caprolactone) (P4VP-b-PCL) have been synthesized by the living ROP of CL followed by the TEMPO polymerization of 4-VP. Depending on the relative block length and different solvent compositions, these copolymers self-assemble into different supramolecular structures in toluene/dichloromethane (DCM) solution, including spherical micelles, bowl-shaped vesicles, multilayer vesicles, porous spheres, and large compound micelles. In methanol/DCM solution system, the crystalline PCL core disturbs the balance of free energy, thus results in a series of morphological changes including spherical micelles, worm-like rods, vesicles, coexisted vesicles and lamella, and finally platelet lamella.     

非金属选择性催化氧化桦木醇制备桦木酸

为高效获得医药中间体桦木酸,以2,2,6,6-四甲基哌啶-氮-氧化物(TEMPO)为催化剂,使用非金属选择性氧化桦木醇,在氧化28位碳上羟基的同时,避免氧化其他基团。确定最优工艺条件为:使用二溴海因作氧化剂,反应温度为25℃,反应时间为1 h,最后得率可达72%。本反应为单一相反应,不需使用相转移催化剂。不但提高了产率,且大大缩短了反应时间,同时使反应条件更加温和。     

Application of a nitroxide radical as overcharge protection in rechargeable lithium batteries

Redox shuttle electrolyte additives have been suggested as a possible mean of internal overcharge protection of secondary lithium-ion batteries. TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) is one of these redox shuttles for overcharge protection of 3 V class Li-ion cells. The electrochemical reversibility and the diffusion coefficient of this molecule has been evaluated by mean of cyclic voltammetry. The redox shuttle voltage was found to be 3.5 V versus Li/Li⁺ and D = cm² s⁻¹. The electrochemical stability of TEMPO in different overcharging conditions has been evaluated by long-term cycling using Li/Li₄Ti₅O₁₂ cells. Results show that the TEMPO redox system does not act as an ideal shuttle. When dissolved in the electrolyte at 0.5 M, this additive is able to level off the cell potential at 3.5 V for a long period at low overcharging current (C/200 to C/50). Nevertheless, it appears that the cell capacity fades drastically at the first cycles and with time. This phenomenon is probably related to the stability of the oxidized and reduced form of the TEMPO molecule.     

Nitroxide‐mediated polymerization of styrene initiated from the surface of montmorillonite clay platelets

Polymer‐grafted montmorillonite (MMT) hybrid composites which possess a hard backbone of MMT and a soft shell of brush‐like polystyrene (PSt) were prepared via “grafting from” strategy based on nitroxide‐mediated radical polymerization (NMRP) using 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) as mediator. Three steps were used to graft PSt chains to the surface of MMT: anchoring of methacrylatoethyl trimethyl ammonium chloride (DMC) onto the surface of MMT by ion exchange reaction first. And then, the surface alkoxyamine initiator was produced in a one‐step process by reacting simultaneously TEMPO, BPO, and DMC in the presence of MMT. Next, PSt chains with controlled molecular weights and polydispersities were grown from the alkoxyamine functionalized MMT surface. The prepared PSt‐g‐MMT hybrid particles have been extensively characterized by FTIR, XPS, XRD, TGA, TEM, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

TEMPO and Carboxylic Acid Functionalized Imidazolium Salts/Sodium Nitrite: An Efficient,Reusable, Transition Metal‐Free Catalytic System for Aerobic Oxidation of Alcohols

An effective catalytic system comprising a 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) functionalized imidazolium salt ([Imim‐TEMPO]⁺ X⁻), a carboxylic acid substituted imidazolium salt ([Imim‐COOH]⁺ X⁻), and sodium nitrite (NaNO₂) was developed for the aerobic oxidation of aliphatic, allylic, heterocyclic and benzylic alcohols to the respective carbonyl compounds with excellent selectivity up to >99%, even at ambient conditions. Notably, the catalyst system could preferentially oxidize a primary alcohol to the aldehyde rather than a secondary alcohol to the ketone. Moreover, the reaction rate is greatly enhanced when a proper amount of water is present. And a high turnover number (TON 5000) is achieved in the present transition metal‐free aerobic catalytic system. Additionally, the functionalized imidazolium salts are successfully reused at least four times. This process thus represents a greener pathway for the aerobic oxidation of alcohols into carbonyl compounds by using the present task‐specific ionic liquids in place of the toxic and volatile additive, such as hydrogen bromide, bromine, or hydrogen chloride (HBr, Br₂ or HCl), which is commonly required for the transition metal‐free aerobic oxidation of alcohols.     

Spin Probe Study of IPN-like Systems based on Polyethylene and Polymethacrylates

A system similar to an interpenetrating polymer network (IPN), based on polyethylene/poly(methylmethacrylate-co-dodecyl methacrylate), was studied by the spin probe method with a nitroxide spin probe, 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO). The influence of changes in the composition of the copolymer (methyl methacrylate-co-dodecyl methacrylate) on the molecular mobility and composition of the IPNs is characterized by changes of the empirical spectral parameters T_50G and τ_R. The molecular mobility was shown to diminish with rising content of methyl methacrylate in the copolymer. © of SCI.     

工业大麻秆纳米纤维素的制备

为实现工业大麻秆的高附加值利用,本研究以工业大麻秆为原料,通过测定化学组分,表明其高纤维素含量（41.45%）的基本特性,证实其制备纳米纤维素的可能性。采用TEMPO-NaBr-NaClO催化氧化体系配合超声制备了氧化纳米纤维素（TCNF）,并研究其在制备过程中各阶段的形貌、化学结构、结晶度及热稳定性。结果表明,以工业大麻秆为原料制备的TCNF,其直径均匀分布在3～6 nm,保留了纤维素典型的Ⅰ型结构,结晶度为50.8%,具有较好的热稳定性。