科钻一井扩孔器的研制及应用

科钻一井在取心钻进中为了尽量避免大段划眼(扩孔),在钻具组合中岩心筒的上、下部位各装一套扩孔器,为此,采用无压浸渍焊接工艺研制出φ157．3 mm碳化钨胎体式表镶φ3mm×5 mm人造聚晶金刚石扩孔器。科钻一井99只扩孔器的现场应用证明,该扩孔器使用寿命较长,满足了全井取心钻进的需要,是一种较好的取心钻具配件,也有助于提高和完善我国硬岩深井大直径取心钻进技术。     

复杂小断块油藏CO2吞吐工艺技术分析

在总结复杂小断块油田CO2吞吐系列配套技术的基础上，分别从油藏规模、物性、能量等角度剖析了71口吞吐井的实施效果，分析了影响CO2吞吐效果的关键参数，得出了注入量、注入压力、返排速度、吞吐周期等工艺技术参数的取值范围和标准，对提高采收率具有重要意义。     

Ti/Al Interaction and Austenite Grain Control in Crankshaft Manufacturing with 38MnSiVS5 Steel

38MnSiVS5 steel is similar to 38MnVS6 steel (EN), the difference being the addition of a small Ti content. Typical Ti and Al contents in the chemical composition of 38MnSiVS5 steel are Ti=0.020 and Al=0.035 mass%. Both elements combine easily with nitrogen, especially Ti, and it has been observed that relatively high Al levels are harmful for austenite grain size control at reheating temperatures. In this work 38MnSiVS5 steel is used to manufacture a large number of castings, varying only the Ti and Al contents and obtaining ingots with a different Ti/Al ratio in each case. The results show that abnormal growth of the austenitic grain occurs irrespective of the Ti and Al contents, due fundamentally to the partial dissolution and coarsening of TiN precipitates. However, the steels with high Al contents present worse behaviour due to the formation of a second type of precipitates, namely AIN, which quickly dissolve between 1000 and 1100°C, causing a drastic decline in local pinning forces that gives rise to more pronounced abnormal growth of the affected grains.     

两种网络安全协议分析与比较

对SSL／TLS和IPSec两种网络安全协议进行了研究，分析了协议的目的、特点，比较了性能、实用性和应用，并给出可能的优化途径。     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

新型热红外伪装涂料用填料中空微珠性能研究

分析了温度对涂层发射率的影响，并据此重点研究了一种新型热红外伪装涂料用填料——中空微珠——的常规使用性能、降温效果以及对涂层发射率的影响。研究认为，中空微殊用量小于20％、粒径为200目左右时常规使用性能最好。60目的中空微殊降温效果最好，而且当其用量小于20％时，中空微珠对涂层的发射率基本没有影响。     

采用5V单电源供电的通信收发器LMS202E/LMS485及其应用

介绍了采用单5V电源工作的RS-232通信双收发器LMS202E和高速双向数据通信差分总线收发器LMS485的主要特性 ,给出了它们的典型应用电路。     

99Al2O3陶瓷的烧成工艺

以两种结构的99Al2O3陶瓷的烧成为例,研究了烧成工艺对烧成结果的影响,分析了99Al2O3陶瓷烧成时开裂的原因,并提出了有效的解决方案.     

Co^3＋—modified Surface of LiMn2O4 Spinel for its Improvementof Electrochemical Properties

Cobalt was used to modify the surface of spinel LiMn2O4 by a solution technique to produce Co^3 -modified surface material (COMSM). Cobalt was only doped into the surface of LiMn2O4 spinel. XPS(X-ray photoelectron spectroscopy) analysis confirms the valence state of Co^3 . COMSM has stable spinel structure and can prevent active materials from the corrosion of electrolyte. The ICP(inductively coupled plasma) determination of the spinel dissolution in electrolyte showed the content of Mn dissolved from COMSM was smaller than that from the pure spinel. AC impedance patterns show that the charge-transfer resistance (Rct) for COMSM is smaller than that for pure spinel. The particles of COMSM are bigger in size than those of pure spinel according to the micrographs of SEM(scanning electron microscopy). The determinations of the electrochemical characterization show that COMSM has both good cycling performance and high initial capacity of 124.1 mA/h at an average capacity loss of 0.19 mAh/g per cycle.     

MPC850中复位逻辑和CPM协议切换的CPLD实现

介绍了用CPLD辅助设计方法在嵌入式系统中进行MPU复杂逻辑功能设计的总体方案。给出了通过对XC5144中复用控制寄存器进行配置以实现MPU复位逻辑和CPM协议切换的实现方案和设计要点。