核电站数字化反应堆保护系统停堆响应时间分析

为了评价出核电站数字化反应堆保护系统停堆响应的最大时间,根据数字化反应堆保护系统结构,分析出保护系统的响应过程须经过AI输入、IO总线通讯、CPU运算、网络通讯、DO输出处理。并基于DCS定周期扫描的运行方式,得出了各处理过程所需最大响应时间的计算方法,DCS停堆响应时间的评价值就是各部分最大响应时间的累加。最后提出了可缩短响应时间的改进方法。     

Radiometric normalization and image mosaic generation of ASTER thermal infrared data: An application to extensive sand sheets and dune fields

Data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) have a significant advantage over previous datasets because of the combination of high spatial resolution (15-90 m) and enhanced multispectral capabilities, particularly in the thermal infrared (TIR) atmospheric window (8-12 μm) of the Earth where common silicate minerals are more easily identified. However, the 60 km swath width of ASTER can limit the effectiveness of accurately tracing large-scale features, such as eolian sediment transport pathways, over long distances. The primary goal of this paper is to describe a method for generating a seamless and radiometrically accurate ASTER TIR mosaic of atmospherically corrected radiance and from that, extract surface emissivity for arid lands, specifically, sand seas. The Gran Desierto in northern Sonora, Mexico was used as a test location for the radiometric normalization technique because of past remote sensing studies of the region, its compositional diversity, and its size. A linear approach was taken to transform adjacent image swaths into a direct linear relationship between image acquisition dates. Pseudo-invariant features (PIFs) were selected using a threshold of correlation between radiance values, and change-pixels were excluded from the linear regression used to determine correction factors. The degree of spectral correlation between overlapping pixels is directly related to the amount of surface change over time; therefore, the gain and offsets between scenes were based only on regions of high spectral correlation. The result was a series of radiometrically normalized radiance-at-surface images that were combined with a minimum of image edge seams present. These edges were subsequently blended to create the final mosaic. The advantages of this approach for TIR radiance (as opposed to emissivity) data include the ability to: (1) analyze data acquired on different dates (with potentially very different surface temperatures) as one seamless compositional dataset; (2) perform decorrelation stretches (DCS) on the entire dataset in order to identify and discriminate compositional units; and (3) separate brightness temperature from surface emissivity for quantitative compositional analysis of the surface, reducing seam-line error in the emissivity mosaic. The approach presented here is valid for any ASTER-related study of large geographic regions where numerous images spanning different temporal and atmospheric conditions are encountered.     

Monitoring land surface processes with thermal infrared data: Calibration of SVAT parameters based on the optimisation of diurnal surface temperature cycling features

Land Surface Models (LSM) have been designed to describe water and energy transfers at the soil-vegetation-atmosphere interface, and are therefore essential in many environmental disciplines. These numerical models, driven by the boundary conditions in the atmosphere and in the soil, require adequate knowledge of those vegetation and soil characteristics which are determinant in the characterisation of mass and energy transfers. In view of the fact that, firstly this information is often only partially known, and secondly the transfers are sometimes incorrectly represented, these models can rapidly drift and need to be regularly corrected. To this aim, remote sensing is a promising tool and many studies are currently devoted to the development of assimilation techniques to control their inputs or internal variables. The research presented in this paper contributes to this effort. Its ambition is to explore new methodologies, designed to make use of remote sensing thermal infrared data recorded from space. This study is based on the analysis of links between the characteristics of the diurnal cycle of the surface brightness temperature and the soil-atmosphere interface parameters and variables. The proposed methodology takes advantage of these temperatures cycling features, instead of absolute temperature values, to calibrate the LSM. The results show that the model parameters have a significant impact on the diurnal temperature dynamics, sometimes to a greater extent than on the temperature itself, and that these relationships have diurnal and seasonal variations. As a consequence, the use of TIR data for LSM calibration can be optimised by considering only those parts of the information which are really relevant to parameter calibration.     

LED PWM dimming linearity investigation

LED PWM dimming application for large scale LED video displays is analyzed. The need for short light pulse duration is outlined. PWM dimming with short driving pulses is investigated experimentally. The LED response time skew introduces the nonlinearity for PWM dimming. For LED response time skew estimation, a method is suggested that has been successfully applied to measure some of today’s market representative LEDs. PWM dimming nonlinearity can be forecasted using the estimated skew. For a particular driving configuration, it is indicated that LED PWM dimming fails to satisfy the required 14 bit output coding together with the image refresh frequency of 400 Hz. A rough investigation demonstrates that the skew is quite stable. Therefore, the nonlinearity correction for the PWM pulse durations shorter than the skew value should be possible.     

Expected runtimes of evolutionary algorithms for the Eulerian cycle problem

Evolutionary algorithms are randomized search heuristics, which are applied to problems whose structure is not well understood, as well as to problems in combinatorial optimization. They have successfully been applied to different kinds of arc routing problems. To start the analysis of evolutionary algorithms with respect to the expected optimization time on these problems, we consider the Eulerian cycle problem. We show that a variant of the well-known (1+1)$(1+1)$ EA working on the important encoding of permutations is able to find an Eulerian tour of an Eulerian graph in expected polynomial time. Altering the operator used for mutation in the considered algorithm, the expected optimization time changes from polynomial to exponential.     

时间序列季节调整方法在中国的发展:PBC版X-12-ARIMA

中国人民银行(PBc)版X-12-ARIMA软件是基于中国特点而定制的时间序列季节调整软件.通过总结时间序列季节调整方法的特点以及相应软件在国外的发展,针对我国应用的特点,尤其是春节因素的考虑,在解剖X-12-ARIMA方法原理的基础上,在春节因素计算方法、软件应用界面以及用户使用帮助等3个主要方面加以改进,具有数据导入、调整设置文件、运行方式以及结果输出4方面的特色.     

求解带时间窗车辆路径问题的改进粒子群算法

通过分析已有粒子群算法对有时间窗约束的车辆路径问题求解质量不高的原因,提出了一种基于粒子交换原理的整数粒子更新方法。采用构造的双层粒子进化算法分别对8个和20个任务点的有时间窗约束的车辆路径问题求解,数值实验结果表明算法的求解精度和耗时均优于已有算法。     

时变不确定多时滞连续系统的最优保成本控制

针对一类同时具有状态多时滞和输入多时滞的时变不确定连续多时滞系统。研究保成本状态反馈控制器的设计。假定其中的时变不确定性项是范数有界的,但不需要满足匹配条件,通过构造改造的Lyapunov函数和线性矩阵不等式（LMI）方法,给出系统满足保性能指标的一个充分条件,仅通过求解一个相应的线性矩阵不等式,就可得到保性能控制器使得闭环系统的一个保成本函数对所有允许的不确定参数有上界。通过求解凸优化问题得到最优保性能控制器,最后用数值例子说明该方法的有效性。     

多数据项广播调度策略

多数据项广播是移动计算环境中一种重要的数据访问方式.为减少用户的平均访问时间和响应最多事务请求,提出了一种新的多数据项广播调度策略.调度策略分为两个阶段,第一阶段根据各事务包含的数据项数目和对重复申请数据项的处理选择事务请求;第二阶段对已选择的事务请求用QEM算法进行调度.实验结果表明,它比现有的QEM算法有更高事务调度成功率和更短的平均访问时间.     

UWB无线传感器网络中基于匹配滤波检测的TOA估计

深入研究了UWB(ultra wideband)无线传感器网络中基于匹配滤波门限检测的TOA(time of arrival)估计算法.针对现有算法的不足,提出了一种三步TOA估计算法:先确定DP(direct path)搜索区域,然后使用门限检测确定DP的粗略位置,最后精确搜索到DP的中心.其中,用于计算检测门限的门限因子依据匹配滤波输出的峭度动态设置,设置模型独立于信道模式,其正确性通过与使用固定门限因子所获得的性能对比进行了验证.与其他算法的性能对比仿真结果表明,所提出的三步TOA估计算法在运算效率和TOA估计精度上取得了较好折衷,适合于当前实际应用.还通过对TOA估计误差的统计分析讨论了测距结果的可信度:依据峭度将测距结果划分为可信和不可信两个级别,并为各级别的TOA估计误差分别了建立概率密度模型.在定位模块中有效利用这些可信度信息,可进一步提高定位精度.